Dynamite Friction 4512-20047 Disc Brake Kit - Front
Front Brake Kit for Jaguar XF
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front brake service on select Jaguar XF models. Part number 4512-20047 combines coated rotors, ceramic pads, and matching hardware components in one service kit for a cleaner, more complete brake refresh.
Compatible With 2009-2010 Jaguar XF, front and 2013-2015 Jaguar XF, front, this kit is designed for drivers looking to restore braking performance, reduce brake noise, and address corrosion-related wear on the front axle.
Key Features
- DFC GEOSPEC coated front brake rotors with a silver-gray corrosion-resistant finish
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Rotors are machined to tight tolerances and finished with a non-directional surface for even pad bed-in
- Part number 4512-20047 for front brake service on Jaguar XF applications
Product Details
DFC GEOSPEC rotors are processed dry and ready to install, which helps reduce prep time during brake service. The rotor casting is made to OE-style G3000/G11H18 cast iron specifications, then inspected for balance and critical dimensions to support stable, quiet operation. The coated surface helps resist rust better than conventional paint or zinc finishes, while the non-directional finish supports smoother pad contact.
The 5000 Advanced ceramic pads are formulated for consistent friction performance and are scorched to reduce uncured bonding agents, helping minimize initial break-in. DFC also uses premium shims to improve NVH characteristics. The included hardware kit is engineered to OE form, fit, and function for the front brake service on the Jaguar XF. Part number 4512-20047 is a direct front brake kit solution for 2009-2010 and 2013-2015 Jaguar XF models.
Common Brake Issues This Kit Addresses
- Front brake noise during stops
- Uneven pad wear caused by fatigued hardware
- Rotor rust and corrosion on exposed braking surfaces
- Brake vibration from worn or uneven rotor finish
- Reduced stopping consistency from aged front brake components
Installation Notes
Install on the front axle only for the listed Jaguar XF applications. Inspect calipers, slides, and mounting points before assembly, and replace any worn components that could affect pad movement or rotor alignment. Because the rotors are shipped dry and ready to install, no oil removal step is required before service. Follow proper bedding procedures after installation to help establish even pad transfer.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining to verify critical attributes and OE-spec targets. Vented rotors are balance-checked and corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship.
Front Brake Kit for Jaguar XF
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front brake service on select Jaguar XF models. Part number 4512-20047 combines coated rotors, ceramic pads, and matching hardware components in one service kit for a cleaner, more complete brake refresh.
Compatible With 2009-2010 Jaguar XF, front and 2013-2015 Jaguar XF, front, this kit is designed for drivers looking to restore braking performance, reduce brake noise, and address corrosion-related wear on the front axle.
Key Features
- DFC GEOSPEC coated front brake rotors with a silver-gray corrosion-resistant finish
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Rotors are machined to tight tolerances and finished with a non-directional surface for even pad bed-in
- Part number 4512-20047 for front brake service on Jaguar XF applications
Product Details
DFC GEOSPEC rotors are processed dry and ready to install, which helps reduce prep time during brake service. The rotor casting is made to OE-style G3000/G11H18 cast iron specifications, then inspected for balance and critical dimensions to support stable, quiet operation. The coated surface helps resist rust better than conventional paint or zinc finishes, while the non-directional finish supports smoother pad contact.
The 5000 Advanced ceramic pads are formulated for consistent friction performance and are scorched to reduce uncured bonding agents, helping minimize initial break-in. DFC also uses premium shims to improve NVH characteristics. The included hardware kit is engineered to OE form, fit, and function for the front brake service on the Jaguar XF. Part number 4512-20047 is a direct front brake kit solution for 2009-2010 and 2013-2015 Jaguar XF models.
Common Brake Issues This Kit Addresses
- Front brake noise during stops
- Uneven pad wear caused by fatigued hardware
- Rotor rust and corrosion on exposed braking surfaces
- Brake vibration from worn or uneven rotor finish
- Reduced stopping consistency from aged front brake components
Installation Notes
Install on the front axle only for the listed Jaguar XF applications. Inspect calipers, slides, and mounting points before assembly, and replace any worn components that could affect pad movement or rotor alignment. Because the rotors are shipped dry and ready to install, no oil removal step is required before service. Follow proper bedding procedures after installation to help establish even pad transfer.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining to verify critical attributes and OE-spec targets. Vented rotors are balance-checked and corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship.
Original: $288.97
-65%$288.97
$101.14Description
Front Brake Kit for Jaguar XF
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front brake service on select Jaguar XF models. Part number 4512-20047 combines coated rotors, ceramic pads, and matching hardware components in one service kit for a cleaner, more complete brake refresh.
Compatible With 2009-2010 Jaguar XF, front and 2013-2015 Jaguar XF, front, this kit is designed for drivers looking to restore braking performance, reduce brake noise, and address corrosion-related wear on the front axle.
Key Features
- DFC GEOSPEC coated front brake rotors with a silver-gray corrosion-resistant finish
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Rotors are machined to tight tolerances and finished with a non-directional surface for even pad bed-in
- Part number 4512-20047 for front brake service on Jaguar XF applications
Product Details
DFC GEOSPEC rotors are processed dry and ready to install, which helps reduce prep time during brake service. The rotor casting is made to OE-style G3000/G11H18 cast iron specifications, then inspected for balance and critical dimensions to support stable, quiet operation. The coated surface helps resist rust better than conventional paint or zinc finishes, while the non-directional finish supports smoother pad contact.
The 5000 Advanced ceramic pads are formulated for consistent friction performance and are scorched to reduce uncured bonding agents, helping minimize initial break-in. DFC also uses premium shims to improve NVH characteristics. The included hardware kit is engineered to OE form, fit, and function for the front brake service on the Jaguar XF. Part number 4512-20047 is a direct front brake kit solution for 2009-2010 and 2013-2015 Jaguar XF models.
Common Brake Issues This Kit Addresses
- Front brake noise during stops
- Uneven pad wear caused by fatigued hardware
- Rotor rust and corrosion on exposed braking surfaces
- Brake vibration from worn or uneven rotor finish
- Reduced stopping consistency from aged front brake components
Installation Notes
Install on the front axle only for the listed Jaguar XF applications. Inspect calipers, slides, and mounting points before assembly, and replace any worn components that could affect pad movement or rotor alignment. Because the rotors are shipped dry and ready to install, no oil removal step is required before service. Follow proper bedding procedures after installation to help establish even pad transfer.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining to verify critical attributes and OE-spec targets. Vented rotors are balance-checked and corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship.
