Dynamite Friction 4512-16005 Disc Brake Kit - Rear
DFC Brake Kit with GeoSpec Rotors
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake service kit for drivers who want OE-style braking performance with corrosion protection. Part number 4512-16005 combines coated rotors, ceramic pads, and matching hardware in one package for a cleaner brake service.
Compatible With select vehicle applications, this kit is built for front or rear brake service depending on the vehicle listing. Use 4512-16005 when you need a direct brake refresh with matched friction materials and rotor finish.
Key Features
- Complete disc brake kit with rotors, pads, and hardware
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and more immediate stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor construction with non-directional finish for smoother pad bed-in
- 100% inspected rotors with balance correction on vented designs
- 12-month warranty against defects in material and workmanship
Product Details
DFC designed the 5000 Advanced pad line for modern braking systems that require consistent friction characteristics across a wide range of vehicles, including family sedans, performance cars, and light trucks. The pads are post cured, then scorched to remove uncured bonding agents, which helps reduce the need for extended break-in. The included hardware uses PTFE coating, vulcanized rubber, and stainless steel for OE-style form and function.
The GeoSpec rotors are machined to tight tolerances and finished with a non-directional surface to support even pad contact and quieter stops. Because the rotors are shipped dry and ready to install, brake service is more efficient and avoids the extra cleaning step associated with oil-coated rotors. Part number 4512-16005 is a practical choice for brake repair on applications such as Honda Civic and Toyota Camry when the vehicle listing confirms fitment.
Common Brake Issues This Kit Addresses
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping performance from worn rotors and pads
- Brake pulsation or rough pedal feel from rotor wear
- Rust buildup on exposed rotor surfaces
Installation Notes
Inspect calipers, slides, and mounting points before installation. Clean the hub surface thoroughly, verify rotor runout, and follow the vehicle manufacturer’s torque specifications. For best results, complete a proper pad bed-in procedure after installation. Confirm the vehicle application before ordering 4512-16005, especially on Honda Civic and Toyota Camry brake service jobs.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and every rotor is covered by a 12-month warranty against defects in material and workmanship. The pad set is manufactured with post-cured friction material and OE-style shims to support stable braking performance.
DFC Brake Kit with GeoSpec Rotors
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake service kit for drivers who want OE-style braking performance with corrosion protection. Part number 4512-16005 combines coated rotors, ceramic pads, and matching hardware in one package for a cleaner brake service.
Compatible With select vehicle applications, this kit is built for front or rear brake service depending on the vehicle listing. Use 4512-16005 when you need a direct brake refresh with matched friction materials and rotor finish.
Key Features
- Complete disc brake kit with rotors, pads, and hardware
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and more immediate stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor construction with non-directional finish for smoother pad bed-in
- 100% inspected rotors with balance correction on vented designs
- 12-month warranty against defects in material and workmanship
Product Details
DFC designed the 5000 Advanced pad line for modern braking systems that require consistent friction characteristics across a wide range of vehicles, including family sedans, performance cars, and light trucks. The pads are post cured, then scorched to remove uncured bonding agents, which helps reduce the need for extended break-in. The included hardware uses PTFE coating, vulcanized rubber, and stainless steel for OE-style form and function.
The GeoSpec rotors are machined to tight tolerances and finished with a non-directional surface to support even pad contact and quieter stops. Because the rotors are shipped dry and ready to install, brake service is more efficient and avoids the extra cleaning step associated with oil-coated rotors. Part number 4512-16005 is a practical choice for brake repair on applications such as Honda Civic and Toyota Camry when the vehicle listing confirms fitment.
Common Brake Issues This Kit Addresses
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping performance from worn rotors and pads
- Brake pulsation or rough pedal feel from rotor wear
- Rust buildup on exposed rotor surfaces
Installation Notes
Inspect calipers, slides, and mounting points before installation. Clean the hub surface thoroughly, verify rotor runout, and follow the vehicle manufacturer’s torque specifications. For best results, complete a proper pad bed-in procedure after installation. Confirm the vehicle application before ordering 4512-16005, especially on Honda Civic and Toyota Camry brake service jobs.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and every rotor is covered by a 12-month warranty against defects in material and workmanship. The pad set is manufactured with post-cured friction material and OE-style shims to support stable braking performance.
Original: $198.11
-65%$198.11
$69.34Description
DFC Brake Kit with GeoSpec Rotors
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake service kit for drivers who want OE-style braking performance with corrosion protection. Part number 4512-16005 combines coated rotors, ceramic pads, and matching hardware in one package for a cleaner brake service.
Compatible With select vehicle applications, this kit is built for front or rear brake service depending on the vehicle listing. Use 4512-16005 when you need a direct brake refresh with matched friction materials and rotor finish.
Key Features
- Complete disc brake kit with rotors, pads, and hardware
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and more immediate stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor construction with non-directional finish for smoother pad bed-in
- 100% inspected rotors with balance correction on vented designs
- 12-month warranty against defects in material and workmanship
Product Details
DFC designed the 5000 Advanced pad line for modern braking systems that require consistent friction characteristics across a wide range of vehicles, including family sedans, performance cars, and light trucks. The pads are post cured, then scorched to remove uncured bonding agents, which helps reduce the need for extended break-in. The included hardware uses PTFE coating, vulcanized rubber, and stainless steel for OE-style form and function.
The GeoSpec rotors are machined to tight tolerances and finished with a non-directional surface to support even pad contact and quieter stops. Because the rotors are shipped dry and ready to install, brake service is more efficient and avoids the extra cleaning step associated with oil-coated rotors. Part number 4512-16005 is a practical choice for brake repair on applications such as Honda Civic and Toyota Camry when the vehicle listing confirms fitment.
Common Brake Issues This Kit Addresses
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping performance from worn rotors and pads
- Brake pulsation or rough pedal feel from rotor wear
- Rust buildup on exposed rotor surfaces
Installation Notes
Inspect calipers, slides, and mounting points before installation. Clean the hub surface thoroughly, verify rotor runout, and follow the vehicle manufacturer’s torque specifications. For best results, complete a proper pad bed-in procedure after installation. Confirm the vehicle application before ordering 4512-16005, especially on Honda Civic and Toyota Camry brake service jobs.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and every rotor is covered by a 12-month warranty against defects in material and workmanship. The pad set is manufactured with post-cured friction material and OE-style shims to support stable braking performance.
