Dynamite Friction 4512-13080 Disc Brake Kit - Front
Front Brake Kit for Subaru WRX
Built for the 2018-2020 Subaru WRX with Performance Package and red calipers, this front disc brake kit combines DFC GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and brake hardware in one service package. Part number 4512-13080 is a direct-fit front brake solution for drivers replacing worn OE-style components on the Subaru WRX.
Key Features
- Fits 2018-2020 Subaru WRX, front, with Performance Package (Red Calipers)
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and consistent first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-13080
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package is engineered for front brake service on the Subaru WRX. The rotors are cast to OEM-style G3000/G11H18 specifications, machined to tight tolerances, and finished dry so they are ready for installation without extra cleaning. The coated surface helps resist rust, while the non-directional finish supports even pad contact and smoother stopping. The 5000 Advanced pads are post-cured and scorched for stable friction performance, and the included hardware is designed to restore proper caliper movement and spring tension. Part number 4512-13080 is intended for front brake replacement on the WRX application listed above.
Common Problems This Kit Can Address
- Brake rotor rust and surface corrosion
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by aged hardware components
- Reduced stopping performance from worn front brake parts
- Excessive vibration or harshness during braking
Installation Notes and Tips
Fits 2018-2020 Subaru WRX, front, with Performance Package (Red Calipers). Verify rotor size, caliper style, and pad shape before installation. Clean the hub face thoroughly, inspect caliper slides, and follow proper torque procedures during assembly. A correct bed-in procedure helps the pads and rotors establish even contact and stable braking performance. Part number 4512-13080 should be matched to the confirmed front application before service begins.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance where applicable, and every rotor carries a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for consistent friction characteristics, and the hardware kit is built with OE-style attention to fit and function. This front brake kit for the Subaru WRX is assembled to support reliable service replacement with components matched for the listed application.
Front Brake Kit for Subaru WRX
Built for the 2018-2020 Subaru WRX with Performance Package and red calipers, this front disc brake kit combines DFC GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and brake hardware in one service package. Part number 4512-13080 is a direct-fit front brake solution for drivers replacing worn OE-style components on the Subaru WRX.
Key Features
- Fits 2018-2020 Subaru WRX, front, with Performance Package (Red Calipers)
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and consistent first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-13080
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package is engineered for front brake service on the Subaru WRX. The rotors are cast to OEM-style G3000/G11H18 specifications, machined to tight tolerances, and finished dry so they are ready for installation without extra cleaning. The coated surface helps resist rust, while the non-directional finish supports even pad contact and smoother stopping. The 5000 Advanced pads are post-cured and scorched for stable friction performance, and the included hardware is designed to restore proper caliper movement and spring tension. Part number 4512-13080 is intended for front brake replacement on the WRX application listed above.
Common Problems This Kit Can Address
- Brake rotor rust and surface corrosion
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by aged hardware components
- Reduced stopping performance from worn front brake parts
- Excessive vibration or harshness during braking
Installation Notes and Tips
Fits 2018-2020 Subaru WRX, front, with Performance Package (Red Calipers). Verify rotor size, caliper style, and pad shape before installation. Clean the hub face thoroughly, inspect caliper slides, and follow proper torque procedures during assembly. A correct bed-in procedure helps the pads and rotors establish even contact and stable braking performance. Part number 4512-13080 should be matched to the confirmed front application before service begins.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance where applicable, and every rotor carries a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for consistent friction characteristics, and the hardware kit is built with OE-style attention to fit and function. This front brake kit for the Subaru WRX is assembled to support reliable service replacement with components matched for the listed application.
Original: $245.73
-65%$245.73
$86.01Description
Front Brake Kit for Subaru WRX
Built for the 2018-2020 Subaru WRX with Performance Package and red calipers, this front disc brake kit combines DFC GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and brake hardware in one service package. Part number 4512-13080 is a direct-fit front brake solution for drivers replacing worn OE-style components on the Subaru WRX.
Key Features
- Fits 2018-2020 Subaru WRX, front, with Performance Package (Red Calipers)
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and consistent first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-13080
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package is engineered for front brake service on the Subaru WRX. The rotors are cast to OEM-style G3000/G11H18 specifications, machined to tight tolerances, and finished dry so they are ready for installation without extra cleaning. The coated surface helps resist rust, while the non-directional finish supports even pad contact and smoother stopping. The 5000 Advanced pads are post-cured and scorched for stable friction performance, and the included hardware is designed to restore proper caliper movement and spring tension. Part number 4512-13080 is intended for front brake replacement on the WRX application listed above.
Common Problems This Kit Can Address
- Brake rotor rust and surface corrosion
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by aged hardware components
- Reduced stopping performance from worn front brake parts
- Excessive vibration or harshness during braking
Installation Notes and Tips
Fits 2018-2020 Subaru WRX, front, with Performance Package (Red Calipers). Verify rotor size, caliper style, and pad shape before installation. Clean the hub face thoroughly, inspect caliper slides, and follow proper torque procedures during assembly. A correct bed-in procedure helps the pads and rotors establish even contact and stable braking performance. Part number 4512-13080 should be matched to the confirmed front application before service begins.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance where applicable, and every rotor carries a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for consistent friction characteristics, and the hardware kit is built with OE-style attention to fit and function. This front brake kit for the Subaru WRX is assembled to support reliable service replacement with components matched for the listed application.
