Dynamite Friction 4512-13070 Disc Brake Kit - Front
Front Brake Kit for 2015 Subaru Legacy
This DFC brake kit combines coated front rotors, 5000 Advanced ceramic pads, and matching brake hardware for a complete front brake service on the 2015 Subaru Legacy. Part number 4512-13070 is built for drivers looking for an OE-style brake replacement with corrosion protection and consistent pedal response.
Compatible with 2015 Subaru Legacy front brake service, this kit is designed to streamline the repair by pairing the rotor, pad, and hardware components in one package. The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware line focuses on fit, finish, and stable braking performance for everyday driving.
Key Features
- Part number 4512-13070 for the front axle
- Fits 2015 Subaru Legacy, front
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for smoother pad bed-in
- OE-spec cast iron rotor construction and machining tolerances
- Hardware kit included for the brake service
Product Details
The DFC GEOSPEC rotor design is processed dry and ready to install, which helps reduce prep time during brake work. The coated surface is intended to resist rust better than conventional paint or zinc finishes, while the machined rotor face and non-directional finish support even pad contact and quieter stops. The 5000 Advanced ceramic pads are post cured and scorched for stable friction characteristics from the first stop, and the included hardware uses PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function.
This front brake kit is a practical choice for 2015 Subaru Legacy brake replacement work when you want matched components from one source. Part number 4512-13070 is also a useful search reference when comparing front brake kit options for the Subaru Legacy.
Common Problems This Kit Can Address
- Brake noise during stops
- Uneven or premature pad wear
- Rotor rust on exposed braking surfaces
- Vibration or harshness from worn brake components
- Reduced braking consistency from fatigued hardware
Installation Notes
Use this kit for the front axle only on the confirmed 2015 Subaru Legacy application. Inspect calipers, slides, and brake fluid condition before assembly, and clean the hub mounting surface to help prevent rotor runout. The coated rotor surface is ready for installation and does not require additional preparation beyond normal brake service procedures.
Quality Assurance
DFC rotors are machined to OE specifications and undergo 100% inspection of critical dimensions and balance checks on vented rotors. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4512-13070 reflects the DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package for the 2015 Subaru Legacy front brake application.
Front Brake Kit for 2015 Subaru Legacy
This DFC brake kit combines coated front rotors, 5000 Advanced ceramic pads, and matching brake hardware for a complete front brake service on the 2015 Subaru Legacy. Part number 4512-13070 is built for drivers looking for an OE-style brake replacement with corrosion protection and consistent pedal response.
Compatible with 2015 Subaru Legacy front brake service, this kit is designed to streamline the repair by pairing the rotor, pad, and hardware components in one package. The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware line focuses on fit, finish, and stable braking performance for everyday driving.
Key Features
- Part number 4512-13070 for the front axle
- Fits 2015 Subaru Legacy, front
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for smoother pad bed-in
- OE-spec cast iron rotor construction and machining tolerances
- Hardware kit included for the brake service
Product Details
The DFC GEOSPEC rotor design is processed dry and ready to install, which helps reduce prep time during brake work. The coated surface is intended to resist rust better than conventional paint or zinc finishes, while the machined rotor face and non-directional finish support even pad contact and quieter stops. The 5000 Advanced ceramic pads are post cured and scorched for stable friction characteristics from the first stop, and the included hardware uses PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function.
This front brake kit is a practical choice for 2015 Subaru Legacy brake replacement work when you want matched components from one source. Part number 4512-13070 is also a useful search reference when comparing front brake kit options for the Subaru Legacy.
Common Problems This Kit Can Address
- Brake noise during stops
- Uneven or premature pad wear
- Rotor rust on exposed braking surfaces
- Vibration or harshness from worn brake components
- Reduced braking consistency from fatigued hardware
Installation Notes
Use this kit for the front axle only on the confirmed 2015 Subaru Legacy application. Inspect calipers, slides, and brake fluid condition before assembly, and clean the hub mounting surface to help prevent rotor runout. The coated rotor surface is ready for installation and does not require additional preparation beyond normal brake service procedures.
Quality Assurance
DFC rotors are machined to OE specifications and undergo 100% inspection of critical dimensions and balance checks on vented rotors. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4512-13070 reflects the DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package for the 2015 Subaru Legacy front brake application.
Description
Front Brake Kit for 2015 Subaru Legacy
This DFC brake kit combines coated front rotors, 5000 Advanced ceramic pads, and matching brake hardware for a complete front brake service on the 2015 Subaru Legacy. Part number 4512-13070 is built for drivers looking for an OE-style brake replacement with corrosion protection and consistent pedal response.
Compatible with 2015 Subaru Legacy front brake service, this kit is designed to streamline the repair by pairing the rotor, pad, and hardware components in one package. The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware line focuses on fit, finish, and stable braking performance for everyday driving.
Key Features
- Part number 4512-13070 for the front axle
- Fits 2015 Subaru Legacy, front
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for smoother pad bed-in
- OE-spec cast iron rotor construction and machining tolerances
- Hardware kit included for the brake service
Product Details
The DFC GEOSPEC rotor design is processed dry and ready to install, which helps reduce prep time during brake work. The coated surface is intended to resist rust better than conventional paint or zinc finishes, while the machined rotor face and non-directional finish support even pad contact and quieter stops. The 5000 Advanced ceramic pads are post cured and scorched for stable friction characteristics from the first stop, and the included hardware uses PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function.
This front brake kit is a practical choice for 2015 Subaru Legacy brake replacement work when you want matched components from one source. Part number 4512-13070 is also a useful search reference when comparing front brake kit options for the Subaru Legacy.
Common Problems This Kit Can Address
- Brake noise during stops
- Uneven or premature pad wear
- Rotor rust on exposed braking surfaces
- Vibration or harshness from worn brake components
- Reduced braking consistency from fatigued hardware
Installation Notes
Use this kit for the front axle only on the confirmed 2015 Subaru Legacy application. Inspect calipers, slides, and brake fluid condition before assembly, and clean the hub mounting surface to help prevent rotor runout. The coated rotor surface is ready for installation and does not require additional preparation beyond normal brake service procedures.
Quality Assurance
DFC rotors are machined to OE specifications and undergo 100% inspection of critical dimensions and balance checks on vented rotors. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4512-13070 reflects the DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package for the 2015 Subaru Legacy front brake application.
