Dynamite Friction 4512-13045 Disc Brake Kit - Rear
Rear Brake Kit for Subaru Forester and Impreza
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a rear disc brake service kit built for specific Subaru applications. Part number 4512-13045 combines coated rotors, ceramic brake pads, and matching hardware for a complete rear brake refresh.
Key Features
- Rear disc brake kit with DFC GEOSPEC coated rotors
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Dry-processed, ready-to-install rotors with a silver-gray corrosion-resistant coating
- Non-directional rotor finish for more even pad bed-in and quieter stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-13045
Product Details
DFC GEOSPEC rotors are manufactured to OEM-style G3000/G11H18 cast iron specifications and machined to tight tolerances for durability and stability. The coated surface helps resist rust, while the non-directional finish supports smoother pad seating. The included 5000 Advanced pads are formulated for stable friction performance and are assembled with noise-reducing shims. This rear brake kit is a direct service solution for Subaru Forester and Subaru Impreza rear brake maintenance, including 1998-2003 Subaru Forester rear and 1998-2003 Subaru Impreza rear applications listed below. Part number 4512-13045 is also a practical match for drivers searching for a Subaru Forester rear brake kit or Subaru Impreza rear disc brake kit with coated rotors and ceramic pads.
Vehicle Fitment
- Fits 1998-2003 Subaru Forester, rear
- Fits 2003 Subaru Impreza, rear, vehicle production date from 10/02 to 12/02
- Fits 2003 Subaru Impreza, rear, vehicle production date from 4/02 to 8/02
- Fits 2002 Subaru Impreza, rear, vehicle production date to 5/02
- Fits 2002 Subaru Impreza, rear, vehicle production date to 9/02
- Fits 1999-2001 Subaru Impreza, rear
- Fits 1998 Subaru Impreza, rear, vehicle production date from 7/98
What This Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn rear brake components
- Longer stopping distances caused by worn friction material
- Premature or uneven pad wear related to aged hardware
Installation Notes
Inspect calipers, slides, and mounting points before installation. Clean hub surfaces thoroughly so the coated rotors seat flat, and follow proper brake bedding procedures after installation. Confirm the vehicle production date on 2002-2003 Subaru Impreza models, since fitment varies by build window. This kit is intended for rear axle service only.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance where applicable, and each rotor is backed by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
Rear Brake Kit for Subaru Forester and Impreza
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a rear disc brake service kit built for specific Subaru applications. Part number 4512-13045 combines coated rotors, ceramic brake pads, and matching hardware for a complete rear brake refresh.
Key Features
- Rear disc brake kit with DFC GEOSPEC coated rotors
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Dry-processed, ready-to-install rotors with a silver-gray corrosion-resistant coating
- Non-directional rotor finish for more even pad bed-in and quieter stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-13045
Product Details
DFC GEOSPEC rotors are manufactured to OEM-style G3000/G11H18 cast iron specifications and machined to tight tolerances for durability and stability. The coated surface helps resist rust, while the non-directional finish supports smoother pad seating. The included 5000 Advanced pads are formulated for stable friction performance and are assembled with noise-reducing shims. This rear brake kit is a direct service solution for Subaru Forester and Subaru Impreza rear brake maintenance, including 1998-2003 Subaru Forester rear and 1998-2003 Subaru Impreza rear applications listed below. Part number 4512-13045 is also a practical match for drivers searching for a Subaru Forester rear brake kit or Subaru Impreza rear disc brake kit with coated rotors and ceramic pads.
Vehicle Fitment
- Fits 1998-2003 Subaru Forester, rear
- Fits 2003 Subaru Impreza, rear, vehicle production date from 10/02 to 12/02
- Fits 2003 Subaru Impreza, rear, vehicle production date from 4/02 to 8/02
- Fits 2002 Subaru Impreza, rear, vehicle production date to 5/02
- Fits 2002 Subaru Impreza, rear, vehicle production date to 9/02
- Fits 1999-2001 Subaru Impreza, rear
- Fits 1998 Subaru Impreza, rear, vehicle production date from 7/98
What This Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn rear brake components
- Longer stopping distances caused by worn friction material
- Premature or uneven pad wear related to aged hardware
Installation Notes
Inspect calipers, slides, and mounting points before installation. Clean hub surfaces thoroughly so the coated rotors seat flat, and follow proper brake bedding procedures after installation. Confirm the vehicle production date on 2002-2003 Subaru Impreza models, since fitment varies by build window. This kit is intended for rear axle service only.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance where applicable, and each rotor is backed by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
Original: $129.64
-65%$129.64
$45.37Description
Rear Brake Kit for Subaru Forester and Impreza
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a rear disc brake service kit built for specific Subaru applications. Part number 4512-13045 combines coated rotors, ceramic brake pads, and matching hardware for a complete rear brake refresh.
Key Features
- Rear disc brake kit with DFC GEOSPEC coated rotors
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Dry-processed, ready-to-install rotors with a silver-gray corrosion-resistant coating
- Non-directional rotor finish for more even pad bed-in and quieter stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-13045
Product Details
DFC GEOSPEC rotors are manufactured to OEM-style G3000/G11H18 cast iron specifications and machined to tight tolerances for durability and stability. The coated surface helps resist rust, while the non-directional finish supports smoother pad seating. The included 5000 Advanced pads are formulated for stable friction performance and are assembled with noise-reducing shims. This rear brake kit is a direct service solution for Subaru Forester and Subaru Impreza rear brake maintenance, including 1998-2003 Subaru Forester rear and 1998-2003 Subaru Impreza rear applications listed below. Part number 4512-13045 is also a practical match for drivers searching for a Subaru Forester rear brake kit or Subaru Impreza rear disc brake kit with coated rotors and ceramic pads.
Vehicle Fitment
- Fits 1998-2003 Subaru Forester, rear
- Fits 2003 Subaru Impreza, rear, vehicle production date from 10/02 to 12/02
- Fits 2003 Subaru Impreza, rear, vehicle production date from 4/02 to 8/02
- Fits 2002 Subaru Impreza, rear, vehicle production date to 5/02
- Fits 2002 Subaru Impreza, rear, vehicle production date to 9/02
- Fits 1999-2001 Subaru Impreza, rear
- Fits 1998 Subaru Impreza, rear, vehicle production date from 7/98
What This Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn rear brake components
- Longer stopping distances caused by worn friction material
- Premature or uneven pad wear related to aged hardware
Installation Notes
Inspect calipers, slides, and mounting points before installation. Clean hub surfaces thoroughly so the coated rotors seat flat, and follow proper brake bedding procedures after installation. Confirm the vehicle production date on 2002-2003 Subaru Impreza models, since fitment varies by build window. This kit is intended for rear axle service only.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance where applicable, and each rotor is backed by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
