Dynamite Friction 4512-11052 Disc Brake Kit - Rear
Rear Brake Kit for Land Rover LR2
DFC part 4512-11052 is a rear disc brake kit for 2008-2012 Land Rover LR2 models. It combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching brake hardware in one service package for a complete rear brake refresh.
Key Features
- Fits 2008-2012 Land Rover LR2, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced ceramic pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce brake noise and vibration
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
Built for the rear axle of the Land Rover LR2, this DFC brake kit is designed to simplify brake service while restoring consistent stopping performance. The coated rotors resist rust better than conventional painted or zinc-coated rotors, and the dry finish eliminates the need to clean off oil before installation. The 5000 Advanced pads are formulated for stable friction and improved NVH control, while the included hardware kit addresses worn or corroded brake hardware that can contribute to uneven wear and noise. Part number 4512-11052 is a practical choice for drivers looking for a complete rear brake service on the 2008-2012 Land Rover LR2.
Common Brake Issues This Kit Can Address
- Rear brake noise, squeal, or vibration
- Rust buildup on rotor surfaces
- Uneven or premature pad wear
- Reduced braking smoothness during stop-and-go driving
- Corroded or fatigued brake hardware
Installation Notes
Compatible With 2008-2012 Land Rover LR2 rear brake service applications. Inspect calipers, slides, and brake fluid condition before installation. Clean all mating surfaces, follow the vehicle service manual, and bed in the pads according to DFC procedures for consistent results. Part number 4512-11052 is supplied as a rear kit, so verify rear axle application before ordering.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required. Each rotor is covered by a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post-cured and scorched for stable performance, and the hardware kit is engineered to OE-style form, fit, and function.
Rear Brake Kit for Land Rover LR2
DFC part 4512-11052 is a rear disc brake kit for 2008-2012 Land Rover LR2 models. It combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching brake hardware in one service package for a complete rear brake refresh.
Key Features
- Fits 2008-2012 Land Rover LR2, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced ceramic pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce brake noise and vibration
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
Built for the rear axle of the Land Rover LR2, this DFC brake kit is designed to simplify brake service while restoring consistent stopping performance. The coated rotors resist rust better than conventional painted or zinc-coated rotors, and the dry finish eliminates the need to clean off oil before installation. The 5000 Advanced pads are formulated for stable friction and improved NVH control, while the included hardware kit addresses worn or corroded brake hardware that can contribute to uneven wear and noise. Part number 4512-11052 is a practical choice for drivers looking for a complete rear brake service on the 2008-2012 Land Rover LR2.
Common Brake Issues This Kit Can Address
- Rear brake noise, squeal, or vibration
- Rust buildup on rotor surfaces
- Uneven or premature pad wear
- Reduced braking smoothness during stop-and-go driving
- Corroded or fatigued brake hardware
Installation Notes
Compatible With 2008-2012 Land Rover LR2 rear brake service applications. Inspect calipers, slides, and brake fluid condition before installation. Clean all mating surfaces, follow the vehicle service manual, and bed in the pads according to DFC procedures for consistent results. Part number 4512-11052 is supplied as a rear kit, so verify rear axle application before ordering.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required. Each rotor is covered by a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post-cured and scorched for stable performance, and the hardware kit is engineered to OE-style form, fit, and function.
Description
Rear Brake Kit for Land Rover LR2
DFC part 4512-11052 is a rear disc brake kit for 2008-2012 Land Rover LR2 models. It combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching brake hardware in one service package for a complete rear brake refresh.
Key Features
- Fits 2008-2012 Land Rover LR2, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced ceramic pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce brake noise and vibration
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
Built for the rear axle of the Land Rover LR2, this DFC brake kit is designed to simplify brake service while restoring consistent stopping performance. The coated rotors resist rust better than conventional painted or zinc-coated rotors, and the dry finish eliminates the need to clean off oil before installation. The 5000 Advanced pads are formulated for stable friction and improved NVH control, while the included hardware kit addresses worn or corroded brake hardware that can contribute to uneven wear and noise. Part number 4512-11052 is a practical choice for drivers looking for a complete rear brake service on the 2008-2012 Land Rover LR2.
Common Brake Issues This Kit Can Address
- Rear brake noise, squeal, or vibration
- Rust buildup on rotor surfaces
- Uneven or premature pad wear
- Reduced braking smoothness during stop-and-go driving
- Corroded or fatigued brake hardware
Installation Notes
Compatible With 2008-2012 Land Rover LR2 rear brake service applications. Inspect calipers, slides, and brake fluid condition before installation. Clean all mating surfaces, follow the vehicle service manual, and bed in the pads according to DFC procedures for consistent results. Part number 4512-11052 is supplied as a rear kit, so verify rear axle application before ordering.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required. Each rotor is covered by a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post-cured and scorched for stable performance, and the hardware kit is engineered to OE-style form, fit, and function.
