Dynamite Friction 4512-07011 Disc Brake Kit - Rear
Rear Brake Kit for Fiat 500
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for rear brake service on the 2013-2019 Fiat 500. Part number 4512-07011 combines coated rotors, ceramic pads, and matched hardware components in one brake service kit for a cleaner, more complete rear brake repair.
Key Features
- Fits 2013-2019 Fiat 500, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Rotors machined to tight tolerances with a non-directional finish for smoother pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-07011
Product Details
This rear disc brake kit is engineered for the Fiat 500 and is designed around OE-style fit, finish, and braking behavior. The coated rotors are shipped dry and ready to install, which helps reduce prep time during a rear brake job. The rotor coating is intended to resist rust better than conventional paint or zinc finishes, while the non-directional surface supports even pad bedding and quieter operation. The 5000 Advanced ceramic pads are post-cured and scorched to promote stable friction performance from the first stop. DFC also pairs the pads with premium shims to help reduce brake noise and vibration. Part number 4512-07011 is a practical choice for drivers searching for a rear brake kit for 2013-2019 Fiat 500 models.
Common Brake Service Issues
- Rear brake noise, squeal, or vibration
- Rust buildup on exposed rotor surfaces
- Uneven pad wear or reduced braking consistency
- Longer stopping distances caused by worn friction components
- Corroded or fatigued brake hardware affecting caliper movement
Installation Notes
Before installation, confirm rear axle fitment on your 2013-2019 Fiat 500 and inspect caliper slides, pads, and mounting points for wear. The dry-coated rotors are ready to install without cleaning oil residue, and the non-directional finish supports a more even bed-in process. Replace worn hardware during service to help maintain proper spring tension and caliper movement. Follow the vehicle manufacturer’s brake service procedure and torque specifications.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications using G3000/G11H18 cast iron, then inspected for critical dimensions and balance. Vented rotors are electronically mill-balanced when needed, and each rotor passes a 100% inspection process. The rotors include a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and assembled with premium shims for consistent performance and NVH control.
Rear Brake Kit for Fiat 500
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for rear brake service on the 2013-2019 Fiat 500. Part number 4512-07011 combines coated rotors, ceramic pads, and matched hardware components in one brake service kit for a cleaner, more complete rear brake repair.
Key Features
- Fits 2013-2019 Fiat 500, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Rotors machined to tight tolerances with a non-directional finish for smoother pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-07011
Product Details
This rear disc brake kit is engineered for the Fiat 500 and is designed around OE-style fit, finish, and braking behavior. The coated rotors are shipped dry and ready to install, which helps reduce prep time during a rear brake job. The rotor coating is intended to resist rust better than conventional paint or zinc finishes, while the non-directional surface supports even pad bedding and quieter operation. The 5000 Advanced ceramic pads are post-cured and scorched to promote stable friction performance from the first stop. DFC also pairs the pads with premium shims to help reduce brake noise and vibration. Part number 4512-07011 is a practical choice for drivers searching for a rear brake kit for 2013-2019 Fiat 500 models.
Common Brake Service Issues
- Rear brake noise, squeal, or vibration
- Rust buildup on exposed rotor surfaces
- Uneven pad wear or reduced braking consistency
- Longer stopping distances caused by worn friction components
- Corroded or fatigued brake hardware affecting caliper movement
Installation Notes
Before installation, confirm rear axle fitment on your 2013-2019 Fiat 500 and inspect caliper slides, pads, and mounting points for wear. The dry-coated rotors are ready to install without cleaning oil residue, and the non-directional finish supports a more even bed-in process. Replace worn hardware during service to help maintain proper spring tension and caliper movement. Follow the vehicle manufacturer’s brake service procedure and torque specifications.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications using G3000/G11H18 cast iron, then inspected for critical dimensions and balance. Vented rotors are electronically mill-balanced when needed, and each rotor passes a 100% inspection process. The rotors include a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and assembled with premium shims for consistent performance and NVH control.
Original: $117.95
-65%$117.95
$41.28Description
Rear Brake Kit for Fiat 500
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for rear brake service on the 2013-2019 Fiat 500. Part number 4512-07011 combines coated rotors, ceramic pads, and matched hardware components in one brake service kit for a cleaner, more complete rear brake repair.
Key Features
- Fits 2013-2019 Fiat 500, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Rotors machined to tight tolerances with a non-directional finish for smoother pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-07011
Product Details
This rear disc brake kit is engineered for the Fiat 500 and is designed around OE-style fit, finish, and braking behavior. The coated rotors are shipped dry and ready to install, which helps reduce prep time during a rear brake job. The rotor coating is intended to resist rust better than conventional paint or zinc finishes, while the non-directional surface supports even pad bedding and quieter operation. The 5000 Advanced ceramic pads are post-cured and scorched to promote stable friction performance from the first stop. DFC also pairs the pads with premium shims to help reduce brake noise and vibration. Part number 4512-07011 is a practical choice for drivers searching for a rear brake kit for 2013-2019 Fiat 500 models.
Common Brake Service Issues
- Rear brake noise, squeal, or vibration
- Rust buildup on exposed rotor surfaces
- Uneven pad wear or reduced braking consistency
- Longer stopping distances caused by worn friction components
- Corroded or fatigued brake hardware affecting caliper movement
Installation Notes
Before installation, confirm rear axle fitment on your 2013-2019 Fiat 500 and inspect caliper slides, pads, and mounting points for wear. The dry-coated rotors are ready to install without cleaning oil residue, and the non-directional finish supports a more even bed-in process. Replace worn hardware during service to help maintain proper spring tension and caliper movement. Follow the vehicle manufacturer’s brake service procedure and torque specifications.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications using G3000/G11H18 cast iron, then inspected for critical dimensions and balance. Vented rotors are electronically mill-balanced when needed, and each rotor passes a 100% inspection process. The rotors include a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and assembled with premium shims for consistent performance and NVH control.
