Dynamite Friction 4512-03186 Disc Brake Kit - Rear
Rear Brake Kit for Genesis G70, G80 and Kia Stinger
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-03186, is a rear disc brake kit built for select Genesis and Kia applications. It combines coated rotors, ceramic brake pads, and brake hardware in one service package for a cleaner, more complete brake job.
- Rear disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-03186 for easy ordering and lookup
DFC GEOSPEC and 5000 Advanced Line Details
The DFC GEOSPEC rotor line is machined to OE-style tolerances and shipped dry, so the rotors are ready to install without oil removal or extra prep. The coated surface helps resist rust, while the cast iron construction is engineered to match OEM durability and stability targets. The 5000 Advanced brake pad line uses post-cured ceramic friction material and scorched surfaces to reduce initial break-in time and deliver consistent stopping performance from the first stop. DFC also pairs the pads with premium rubber-steel-rubber shims to improve noise, vibration, and harshness control.
This kit is a direct service solution for rear brake replacement on 2023 Genesis G70, rear; 2022-2023 Kia Stinger, rear; 2022 Genesis G70, rear; and 2018-2020 Genesis G80, rear. It is a practical choice when replacing worn rear rotors and pads on a Genesis G70 rear brake service, a Kia Stinger rear brake repair, or a Genesis G80 rear brake refresh. The part number 4512-03186 is also useful when searching for a rear brake kit for Genesis G70 or Kia Stinger applications.
What This Brake Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Brake pulsation related to worn rear rotors
- Reduced stopping consistency from aged friction material
- Rust buildup on exposed rotor surfaces
Installation Notes and Tips
Inspect calipers, slides, and mounting points before installation, and replace any damaged components found during service. Clean the hub face thoroughly to help prevent rotor runout and vibration. Follow the vehicle manufacturer’s bedding procedure after installation so the pads and rotors can seat evenly. This rear kit is intended for the listed Genesis G70, Genesis G80, and Kia Stinger applications only.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, and the finished rotor is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function standards.
Rear Brake Kit for Genesis G70, G80 and Kia Stinger
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-03186, is a rear disc brake kit built for select Genesis and Kia applications. It combines coated rotors, ceramic brake pads, and brake hardware in one service package for a cleaner, more complete brake job.
- Rear disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-03186 for easy ordering and lookup
DFC GEOSPEC and 5000 Advanced Line Details
The DFC GEOSPEC rotor line is machined to OE-style tolerances and shipped dry, so the rotors are ready to install without oil removal or extra prep. The coated surface helps resist rust, while the cast iron construction is engineered to match OEM durability and stability targets. The 5000 Advanced brake pad line uses post-cured ceramic friction material and scorched surfaces to reduce initial break-in time and deliver consistent stopping performance from the first stop. DFC also pairs the pads with premium rubber-steel-rubber shims to improve noise, vibration, and harshness control.
This kit is a direct service solution for rear brake replacement on 2023 Genesis G70, rear; 2022-2023 Kia Stinger, rear; 2022 Genesis G70, rear; and 2018-2020 Genesis G80, rear. It is a practical choice when replacing worn rear rotors and pads on a Genesis G70 rear brake service, a Kia Stinger rear brake repair, or a Genesis G80 rear brake refresh. The part number 4512-03186 is also useful when searching for a rear brake kit for Genesis G70 or Kia Stinger applications.
What This Brake Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Brake pulsation related to worn rear rotors
- Reduced stopping consistency from aged friction material
- Rust buildup on exposed rotor surfaces
Installation Notes and Tips
Inspect calipers, slides, and mounting points before installation, and replace any damaged components found during service. Clean the hub face thoroughly to help prevent rotor runout and vibration. Follow the vehicle manufacturer’s bedding procedure after installation so the pads and rotors can seat evenly. This rear kit is intended for the listed Genesis G70, Genesis G80, and Kia Stinger applications only.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, and the finished rotor is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function standards.
Original: $217.63
-65%$217.63
$76.17Description
Rear Brake Kit for Genesis G70, G80 and Kia Stinger
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-03186, is a rear disc brake kit built for select Genesis and Kia applications. It combines coated rotors, ceramic brake pads, and brake hardware in one service package for a cleaner, more complete brake job.
- Rear disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-03186 for easy ordering and lookup
DFC GEOSPEC and 5000 Advanced Line Details
The DFC GEOSPEC rotor line is machined to OE-style tolerances and shipped dry, so the rotors are ready to install without oil removal or extra prep. The coated surface helps resist rust, while the cast iron construction is engineered to match OEM durability and stability targets. The 5000 Advanced brake pad line uses post-cured ceramic friction material and scorched surfaces to reduce initial break-in time and deliver consistent stopping performance from the first stop. DFC also pairs the pads with premium rubber-steel-rubber shims to improve noise, vibration, and harshness control.
This kit is a direct service solution for rear brake replacement on 2023 Genesis G70, rear; 2022-2023 Kia Stinger, rear; 2022 Genesis G70, rear; and 2018-2020 Genesis G80, rear. It is a practical choice when replacing worn rear rotors and pads on a Genesis G70 rear brake service, a Kia Stinger rear brake repair, or a Genesis G80 rear brake refresh. The part number 4512-03186 is also useful when searching for a rear brake kit for Genesis G70 or Kia Stinger applications.
What This Brake Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Brake pulsation related to worn rear rotors
- Reduced stopping consistency from aged friction material
- Rust buildup on exposed rotor surfaces
Installation Notes and Tips
Inspect calipers, slides, and mounting points before installation, and replace any damaged components found during service. Clean the hub face thoroughly to help prevent rotor runout and vibration. Follow the vehicle manufacturer’s bedding procedure after installation so the pads and rotors can seat evenly. This rear kit is intended for the listed Genesis G70, Genesis G80, and Kia Stinger applications only.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, and the finished rotor is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function standards.
