Dynamite Friction 4512-03117 Disc Brake Kit - Front
Front Brake Kit for Hyundai Veloster
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front brake service on select Hyundai Veloster models. It combines coated rotors, ceramic pads, and matched hardware in one brake kit for a complete front axle repair.
Fits 2013 Hyundai Veloster, front. Fits 2014-2015 Hyundai Veloster, front. Part number 4512-03117 is a direct-fit brake service kit for these applications.
Key Features
- DFC GEOSPEC coated front rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bedding and smoother stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-03117 for Hyundai Veloster front brake service
Product Details
The DFC 5000 Advanced pad formulation is engineered for stable friction performance and consistent stopping response. The pads are post cured and scorched during production, which helps reduce the need for extended break-in after installation. The included shims are designed to support quieter operation and more controlled caliper movement.
The GEOSPEC rotors are machined to tight tolerances from G3000/G11H18 cast iron and finished with a dry, ready-to-install coating that helps resist rust. Each rotor receives a non-directional finish and balance inspection to support smooth braking performance. The hardware kit is built to OE-style form, fit, and function for front brake service on the Hyundai Veloster.
Common Brake Service Issues
- Front brake noise during stops
- Rotor rust and surface corrosion
- Uneven pad wear or rotor wear
- Reduced braking smoothness or pedal feel
- Worn or fatigued brake hardware
Installation Notes
Use this kit for front axle brake service only on the listed Hyundai Veloster applications. Clean the hub mounting surface before installing the rotors, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. Verify caliper, pad, and rotor condition during service, and replace any worn related components as needed. Part number 4512-03117 should be matched to the vehicle’s year and front position before installation.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and OE specification compliance, and vented rotors are balance-checked during production. The rotors carry a 12-month warranty against defects in material and workmanship. The brake pads are produced with OEM-focused friction development and assembled with premium shims for consistent performance.
Front Brake Kit for Hyundai Veloster
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front brake service on select Hyundai Veloster models. It combines coated rotors, ceramic pads, and matched hardware in one brake kit for a complete front axle repair.
Fits 2013 Hyundai Veloster, front. Fits 2014-2015 Hyundai Veloster, front. Part number 4512-03117 is a direct-fit brake service kit for these applications.
Key Features
- DFC GEOSPEC coated front rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bedding and smoother stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-03117 for Hyundai Veloster front brake service
Product Details
The DFC 5000 Advanced pad formulation is engineered for stable friction performance and consistent stopping response. The pads are post cured and scorched during production, which helps reduce the need for extended break-in after installation. The included shims are designed to support quieter operation and more controlled caliper movement.
The GEOSPEC rotors are machined to tight tolerances from G3000/G11H18 cast iron and finished with a dry, ready-to-install coating that helps resist rust. Each rotor receives a non-directional finish and balance inspection to support smooth braking performance. The hardware kit is built to OE-style form, fit, and function for front brake service on the Hyundai Veloster.
Common Brake Service Issues
- Front brake noise during stops
- Rotor rust and surface corrosion
- Uneven pad wear or rotor wear
- Reduced braking smoothness or pedal feel
- Worn or fatigued brake hardware
Installation Notes
Use this kit for front axle brake service only on the listed Hyundai Veloster applications. Clean the hub mounting surface before installing the rotors, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. Verify caliper, pad, and rotor condition during service, and replace any worn related components as needed. Part number 4512-03117 should be matched to the vehicle’s year and front position before installation.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and OE specification compliance, and vented rotors are balance-checked during production. The rotors carry a 12-month warranty against defects in material and workmanship. The brake pads are produced with OEM-focused friction development and assembled with premium shims for consistent performance.
Original: $212.60
-65%$212.60
$74.41Description
Front Brake Kit for Hyundai Veloster
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front brake service on select Hyundai Veloster models. It combines coated rotors, ceramic pads, and matched hardware in one brake kit for a complete front axle repair.
Fits 2013 Hyundai Veloster, front. Fits 2014-2015 Hyundai Veloster, front. Part number 4512-03117 is a direct-fit brake service kit for these applications.
Key Features
- DFC GEOSPEC coated front rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bedding and smoother stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-03117 for Hyundai Veloster front brake service
Product Details
The DFC 5000 Advanced pad formulation is engineered for stable friction performance and consistent stopping response. The pads are post cured and scorched during production, which helps reduce the need for extended break-in after installation. The included shims are designed to support quieter operation and more controlled caliper movement.
The GEOSPEC rotors are machined to tight tolerances from G3000/G11H18 cast iron and finished with a dry, ready-to-install coating that helps resist rust. Each rotor receives a non-directional finish and balance inspection to support smooth braking performance. The hardware kit is built to OE-style form, fit, and function for front brake service on the Hyundai Veloster.
Common Brake Service Issues
- Front brake noise during stops
- Rotor rust and surface corrosion
- Uneven pad wear or rotor wear
- Reduced braking smoothness or pedal feel
- Worn or fatigued brake hardware
Installation Notes
Use this kit for front axle brake service only on the listed Hyundai Veloster applications. Clean the hub mounting surface before installing the rotors, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. Verify caliper, pad, and rotor condition during service, and replace any worn related components as needed. Part number 4512-03117 should be matched to the vehicle’s year and front position before installation.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and OE specification compliance, and vented rotors are balance-checked during production. The rotors carry a 12-month warranty against defects in material and workmanship. The brake pads are produced with OEM-focused friction development and assembled with premium shims for consistent performance.
