Dynamite Friction 4504-76026 Disc Brake Kit - Front and Rear
Brake Kit for Toyota Camry
This Dynamite Friction brake service kit combines DFC GEOSPEC coated rotors with 5000 Advanced brake pads for a complete front and rear brake refresh. It is built for 2002-2006 Toyota Camry models made in North America and is identified by part number 4504-76026.
The DFC GEOSPEC rotor finish helps resist rust and arrives dry, so the rotors are ready to install without oil removal. The 5000 Advanced pads are post-cured, scorched, and paired with premium rubber-steel-rubber shims to support stable friction, quicker initial bite, and reduced noise, vibration, and harshness.
Key Features
- Complete disc brake kit with rotors and pads
- Compatible with 2002-2006 Toyota Camry, front and rear
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Dry-packed rotors for faster installation
- Non-directional rotor finish for even pad bed-in and smoother braking
- 5000 Advanced pads with post-cured friction material
- Premium shims for improved NVH control
- Part number 4504-76026
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as an OE-style brake service solution for the Toyota Camry. The rotor castings use G3000/G11H18 cast iron specification and are machined to tight tolerances, then finished with a non-directional surface to promote consistent pad contact. Vented rotors are balance-inspected and corrected when needed, and every rotor is checked against critical OE dimensions before release. The 5000 Advanced pad formulation is developed with input from OEM friction suppliers and is assembled to deliver stable braking performance across a wide range of driving conditions. If you are searching for a 2002-2006 Toyota Camry front and rear brake kit, part number 4504-76026 provides the matched components in one package.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise from aged pads or rotor surface irregularities
- Rust buildup on exposed rotor surfaces
- Reduced stopping performance from worn friction material
- Longer brake service time caused by oil-coated replacement rotors
Installation Notes and Tips
Compatible With 2002-2006 Toyota Camry, front and rear. Confirm rotor size and brake configuration before installation, and service both axles together when replacing a full brake set. The dry rotor coating is swept away by the pads during normal braking, so no special cleaning is required before installation. For best results, follow the vehicle manufacturer’s brake service procedure and perform a proper pad bed-in after installation. Part number 4504-76026 is also a useful reference when verifying the correct kit for your Camry brake job.
Quality Assurance
DFC states that each rotor is 100% inspected for critical dimensions and that all vented rotors are balance-checked during production. The rotors are backed by a 12-month warranty against defects in material and workmanship.
Brake Kit for Toyota Camry
This Dynamite Friction brake service kit combines DFC GEOSPEC coated rotors with 5000 Advanced brake pads for a complete front and rear brake refresh. It is built for 2002-2006 Toyota Camry models made in North America and is identified by part number 4504-76026.
The DFC GEOSPEC rotor finish helps resist rust and arrives dry, so the rotors are ready to install without oil removal. The 5000 Advanced pads are post-cured, scorched, and paired with premium rubber-steel-rubber shims to support stable friction, quicker initial bite, and reduced noise, vibration, and harshness.
Key Features
- Complete disc brake kit with rotors and pads
- Compatible with 2002-2006 Toyota Camry, front and rear
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Dry-packed rotors for faster installation
- Non-directional rotor finish for even pad bed-in and smoother braking
- 5000 Advanced pads with post-cured friction material
- Premium shims for improved NVH control
- Part number 4504-76026
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as an OE-style brake service solution for the Toyota Camry. The rotor castings use G3000/G11H18 cast iron specification and are machined to tight tolerances, then finished with a non-directional surface to promote consistent pad contact. Vented rotors are balance-inspected and corrected when needed, and every rotor is checked against critical OE dimensions before release. The 5000 Advanced pad formulation is developed with input from OEM friction suppliers and is assembled to deliver stable braking performance across a wide range of driving conditions. If you are searching for a 2002-2006 Toyota Camry front and rear brake kit, part number 4504-76026 provides the matched components in one package.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise from aged pads or rotor surface irregularities
- Rust buildup on exposed rotor surfaces
- Reduced stopping performance from worn friction material
- Longer brake service time caused by oil-coated replacement rotors
Installation Notes and Tips
Compatible With 2002-2006 Toyota Camry, front and rear. Confirm rotor size and brake configuration before installation, and service both axles together when replacing a full brake set. The dry rotor coating is swept away by the pads during normal braking, so no special cleaning is required before installation. For best results, follow the vehicle manufacturer’s brake service procedure and perform a proper pad bed-in after installation. Part number 4504-76026 is also a useful reference when verifying the correct kit for your Camry brake job.
Quality Assurance
DFC states that each rotor is 100% inspected for critical dimensions and that all vented rotors are balance-checked during production. The rotors are backed by a 12-month warranty against defects in material and workmanship.
Original: $292.29
-65%$292.29
$102.30Description
Brake Kit for Toyota Camry
This Dynamite Friction brake service kit combines DFC GEOSPEC coated rotors with 5000 Advanced brake pads for a complete front and rear brake refresh. It is built for 2002-2006 Toyota Camry models made in North America and is identified by part number 4504-76026.
The DFC GEOSPEC rotor finish helps resist rust and arrives dry, so the rotors are ready to install without oil removal. The 5000 Advanced pads are post-cured, scorched, and paired with premium rubber-steel-rubber shims to support stable friction, quicker initial bite, and reduced noise, vibration, and harshness.
Key Features
- Complete disc brake kit with rotors and pads
- Compatible with 2002-2006 Toyota Camry, front and rear
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Dry-packed rotors for faster installation
- Non-directional rotor finish for even pad bed-in and smoother braking
- 5000 Advanced pads with post-cured friction material
- Premium shims for improved NVH control
- Part number 4504-76026
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as an OE-style brake service solution for the Toyota Camry. The rotor castings use G3000/G11H18 cast iron specification and are machined to tight tolerances, then finished with a non-directional surface to promote consistent pad contact. Vented rotors are balance-inspected and corrected when needed, and every rotor is checked against critical OE dimensions before release. The 5000 Advanced pad formulation is developed with input from OEM friction suppliers and is assembled to deliver stable braking performance across a wide range of driving conditions. If you are searching for a 2002-2006 Toyota Camry front and rear brake kit, part number 4504-76026 provides the matched components in one package.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise from aged pads or rotor surface irregularities
- Rust buildup on exposed rotor surfaces
- Reduced stopping performance from worn friction material
- Longer brake service time caused by oil-coated replacement rotors
Installation Notes and Tips
Compatible With 2002-2006 Toyota Camry, front and rear. Confirm rotor size and brake configuration before installation, and service both axles together when replacing a full brake set. The dry rotor coating is swept away by the pads during normal braking, so no special cleaning is required before installation. For best results, follow the vehicle manufacturer’s brake service procedure and perform a proper pad bed-in after installation. Part number 4504-76026 is also a useful reference when verifying the correct kit for your Camry brake job.
Quality Assurance
DFC states that each rotor is 100% inspected for critical dimensions and that all vented rotors are balance-checked during production. The rotors are backed by a 12-month warranty against defects in material and workmanship.
