Dynamite Friction 4504-74056 Disc Brake Kit - Front and Rear
Brake Kit for Audi TT Front and Rear
Restore braking performance on the 2008-2009 Audi TT with the DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit. Part number 4504-74056 combines coated rotors and matched friction material in one service package for front and rear brake service.
This brake kit is built for Audi TT owners looking for a complete disc brake kit for 2008-2009 Audi TT front and rear applications. The rotor and pad pairing is engineered to support quieter stops, smoother pad bed-in, and consistent braking feel after service.
Key Features
- Complete disc brake kit with rotors and 5000 Advanced Brake Pads
- Fits 2008-2009 Audi TT, front and rear
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and quieter operation
- G3000/G11H18 cast iron rotor specification for OEM-style durability and stability
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-74056 for easy identification
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are part of the DFC Complete Brake Kits lineup, which packages the core brake service components together for a direct repair approach. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions before release. The coated surface helps resist rust better than conventional paint or zinc-style finishes, while the dry packaging saves prep time during installation. The 5000 Advanced pads are formulated for broad vehicle coverage and assembled with shims that support NVH control. For Audi TT brake replacement, part number 4504-74056 provides a matched front and rear solution.
Common Brake Issues This Kit Addresses
- Brake pulsation from worn or uneven rotors
- Noise during braking from aged pads or rotor surface wear
- Reduced stopping consistency after pad and rotor wear
- Rust buildup on exposed rotor surfaces
- Extended service time caused by cleaning oil-coated rotors
Installation Notes
Compatible With 2008-2009 Audi TT, front and rear. Verify axle position before ordering and confirm rotor dimensions against the vehicle’s brake specification. The rotors are shipped dry and ready for installation, and the pad surface is prepared to reduce initial break-in time. Follow standard brake service procedures and bed-in recommendations after installation. Part number 4504-74056 is intended for direct brake service on the listed Audi TT applications.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions, balance, and OE-spec compliance after machining. The rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to support stable friction characteristics from the first stop.
Brake Kit for Audi TT Front and Rear
Restore braking performance on the 2008-2009 Audi TT with the DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit. Part number 4504-74056 combines coated rotors and matched friction material in one service package for front and rear brake service.
This brake kit is built for Audi TT owners looking for a complete disc brake kit for 2008-2009 Audi TT front and rear applications. The rotor and pad pairing is engineered to support quieter stops, smoother pad bed-in, and consistent braking feel after service.
Key Features
- Complete disc brake kit with rotors and 5000 Advanced Brake Pads
- Fits 2008-2009 Audi TT, front and rear
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and quieter operation
- G3000/G11H18 cast iron rotor specification for OEM-style durability and stability
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-74056 for easy identification
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are part of the DFC Complete Brake Kits lineup, which packages the core brake service components together for a direct repair approach. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions before release. The coated surface helps resist rust better than conventional paint or zinc-style finishes, while the dry packaging saves prep time during installation. The 5000 Advanced pads are formulated for broad vehicle coverage and assembled with shims that support NVH control. For Audi TT brake replacement, part number 4504-74056 provides a matched front and rear solution.
Common Brake Issues This Kit Addresses
- Brake pulsation from worn or uneven rotors
- Noise during braking from aged pads or rotor surface wear
- Reduced stopping consistency after pad and rotor wear
- Rust buildup on exposed rotor surfaces
- Extended service time caused by cleaning oil-coated rotors
Installation Notes
Compatible With 2008-2009 Audi TT, front and rear. Verify axle position before ordering and confirm rotor dimensions against the vehicle’s brake specification. The rotors are shipped dry and ready for installation, and the pad surface is prepared to reduce initial break-in time. Follow standard brake service procedures and bed-in recommendations after installation. Part number 4504-74056 is intended for direct brake service on the listed Audi TT applications.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions, balance, and OE-spec compliance after machining. The rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to support stable friction characteristics from the first stop.
Original: $336.32
-65%$336.32
$117.71Description
Brake Kit for Audi TT Front and Rear
Restore braking performance on the 2008-2009 Audi TT with the DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit. Part number 4504-74056 combines coated rotors and matched friction material in one service package for front and rear brake service.
This brake kit is built for Audi TT owners looking for a complete disc brake kit for 2008-2009 Audi TT front and rear applications. The rotor and pad pairing is engineered to support quieter stops, smoother pad bed-in, and consistent braking feel after service.
Key Features
- Complete disc brake kit with rotors and 5000 Advanced Brake Pads
- Fits 2008-2009 Audi TT, front and rear
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and quieter operation
- G3000/G11H18 cast iron rotor specification for OEM-style durability and stability
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-74056 for easy identification
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are part of the DFC Complete Brake Kits lineup, which packages the core brake service components together for a direct repair approach. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions before release. The coated surface helps resist rust better than conventional paint or zinc-style finishes, while the dry packaging saves prep time during installation. The 5000 Advanced pads are formulated for broad vehicle coverage and assembled with shims that support NVH control. For Audi TT brake replacement, part number 4504-74056 provides a matched front and rear solution.
Common Brake Issues This Kit Addresses
- Brake pulsation from worn or uneven rotors
- Noise during braking from aged pads or rotor surface wear
- Reduced stopping consistency after pad and rotor wear
- Rust buildup on exposed rotor surfaces
- Extended service time caused by cleaning oil-coated rotors
Installation Notes
Compatible With 2008-2009 Audi TT, front and rear. Verify axle position before ordering and confirm rotor dimensions against the vehicle’s brake specification. The rotors are shipped dry and ready for installation, and the pad surface is prepared to reduce initial break-in time. Follow standard brake service procedures and bed-in recommendations after installation. Part number 4504-74056 is intended for direct brake service on the listed Audi TT applications.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions, balance, and OE-spec compliance after machining. The rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to support stable friction characteristics from the first stop.
