Dynamite Friction 4504-74028 Disc Brake Kit - Front and Rear
Brake Kit for Audi A3 and Volkswagen Jetta
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-74028, combines coated brake rotors and matched pads in one service kit. It is built for front and rear brake service on select Audi A3 and Volkswagen Jetta applications, with fitment-specific notes for caliper and rotor configuration.
Key Features
- Complete disc brake kit with DFC GEOSPEC coated rotors and 5000 Advanced brake pads
- GeoSpec rotor coating helps resist rust and arrives dry, ready for installation
- Rotors are machined to OE-style tolerances with a non-directional finish for smoother pad bed-in
- 5000 Advanced pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims are used to improve noise, vibration, and harshness control
- Part number 4504-74028 for easy identification during brake service
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built for drivers who want a matched rotor-and-pad service package for routine brake replacement. The rotors use G3000/G11H18 cast iron construction and a silver-gray protective coating that helps fight corrosion while eliminating the need to clean off oil before installation. The pads are formulated for stable friction performance and are assembled with shims to support quieter operation. This kit is a practical choice for Audi A3 and Volkswagen Jetta brake jobs where OE-style fit, finish, and consistent stopping feel matter.
Compatible With 2010 Audi A3, front and rear; 256mm rear rotors; TRW/Girling rear calipers. Compatible With 2008 Audi A3, front and rear; from chassis number 8P-8-057-779. Compatible With 2006-2009 Volkswagen Jetta, front and rear. Compatible With 2010 Volkswagen Jetta, front and rear; with TRW rear calipers. Part number 4504-74028 is also a useful reference when ordering the correct brake kit for these applications.
Common Brake Service Issues
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pad friction material
- Brake noise caused by pad wear or poor shim performance
- Rust buildup on exposed rotor surfaces
- Longer service time when rotors require extra preparation before installation
Installation Notes
Verify rotor size, rear caliper type, and chassis breakpoints before installation. This kit is listed for front and rear service on the specified Audi A3 and Volkswagen Jetta applications, so confirm the vehicle configuration against the fitment notes before ordering. Clean mating surfaces, inspect caliper hardware and slide components, and follow the pad bed-in procedure recommended for the friction material. The rotors are shipped dry and ready to install.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The finished rotors are checked against OE specifications, and the kit includes a 12-month warranty against defects in material and workmanship.
Brake Kit for Audi A3 and Volkswagen Jetta
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-74028, combines coated brake rotors and matched pads in one service kit. It is built for front and rear brake service on select Audi A3 and Volkswagen Jetta applications, with fitment-specific notes for caliper and rotor configuration.
Key Features
- Complete disc brake kit with DFC GEOSPEC coated rotors and 5000 Advanced brake pads
- GeoSpec rotor coating helps resist rust and arrives dry, ready for installation
- Rotors are machined to OE-style tolerances with a non-directional finish for smoother pad bed-in
- 5000 Advanced pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims are used to improve noise, vibration, and harshness control
- Part number 4504-74028 for easy identification during brake service
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built for drivers who want a matched rotor-and-pad service package for routine brake replacement. The rotors use G3000/G11H18 cast iron construction and a silver-gray protective coating that helps fight corrosion while eliminating the need to clean off oil before installation. The pads are formulated for stable friction performance and are assembled with shims to support quieter operation. This kit is a practical choice for Audi A3 and Volkswagen Jetta brake jobs where OE-style fit, finish, and consistent stopping feel matter.
Compatible With 2010 Audi A3, front and rear; 256mm rear rotors; TRW/Girling rear calipers. Compatible With 2008 Audi A3, front and rear; from chassis number 8P-8-057-779. Compatible With 2006-2009 Volkswagen Jetta, front and rear. Compatible With 2010 Volkswagen Jetta, front and rear; with TRW rear calipers. Part number 4504-74028 is also a useful reference when ordering the correct brake kit for these applications.
Common Brake Service Issues
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pad friction material
- Brake noise caused by pad wear or poor shim performance
- Rust buildup on exposed rotor surfaces
- Longer service time when rotors require extra preparation before installation
Installation Notes
Verify rotor size, rear caliper type, and chassis breakpoints before installation. This kit is listed for front and rear service on the specified Audi A3 and Volkswagen Jetta applications, so confirm the vehicle configuration against the fitment notes before ordering. Clean mating surfaces, inspect caliper hardware and slide components, and follow the pad bed-in procedure recommended for the friction material. The rotors are shipped dry and ready to install.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The finished rotors are checked against OE specifications, and the kit includes a 12-month warranty against defects in material and workmanship.
Original: $338.30
-65%$338.30
$118.41Description
Brake Kit for Audi A3 and Volkswagen Jetta
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-74028, combines coated brake rotors and matched pads in one service kit. It is built for front and rear brake service on select Audi A3 and Volkswagen Jetta applications, with fitment-specific notes for caliper and rotor configuration.
Key Features
- Complete disc brake kit with DFC GEOSPEC coated rotors and 5000 Advanced brake pads
- GeoSpec rotor coating helps resist rust and arrives dry, ready for installation
- Rotors are machined to OE-style tolerances with a non-directional finish for smoother pad bed-in
- 5000 Advanced pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims are used to improve noise, vibration, and harshness control
- Part number 4504-74028 for easy identification during brake service
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built for drivers who want a matched rotor-and-pad service package for routine brake replacement. The rotors use G3000/G11H18 cast iron construction and a silver-gray protective coating that helps fight corrosion while eliminating the need to clean off oil before installation. The pads are formulated for stable friction performance and are assembled with shims to support quieter operation. This kit is a practical choice for Audi A3 and Volkswagen Jetta brake jobs where OE-style fit, finish, and consistent stopping feel matter.
Compatible With 2010 Audi A3, front and rear; 256mm rear rotors; TRW/Girling rear calipers. Compatible With 2008 Audi A3, front and rear; from chassis number 8P-8-057-779. Compatible With 2006-2009 Volkswagen Jetta, front and rear. Compatible With 2010 Volkswagen Jetta, front and rear; with TRW rear calipers. Part number 4504-74028 is also a useful reference when ordering the correct brake kit for these applications.
Common Brake Service Issues
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pad friction material
- Brake noise caused by pad wear or poor shim performance
- Rust buildup on exposed rotor surfaces
- Longer service time when rotors require extra preparation before installation
Installation Notes
Verify rotor size, rear caliper type, and chassis breakpoints before installation. This kit is listed for front and rear service on the specified Audi A3 and Volkswagen Jetta applications, so confirm the vehicle configuration against the fitment notes before ordering. Clean mating surfaces, inspect caliper hardware and slide components, and follow the pad bed-in procedure recommended for the friction material. The rotors are shipped dry and ready to install.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The finished rotors are checked against OE specifications, and the kit includes a 12-month warranty against defects in material and workmanship.
