Dynamite Friction 4504-73035 Disc Brake Kit - Front and Rear
Brake Kit for Audi A4 and A5
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched pads in one service package. It is built for front and rear brake service on select Audi applications, including the Audi A4, Audi A4 Quattro, Audi A5, and Audi A5 Quattro.
Part number 4504-73035 is a complete disc brake kit for drivers looking for an OE-style brake service solution with rotor and pad components matched for the same axle set.
Key Features
- Complete disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and ready to install
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-matched cast iron rotor construction for durability and stability
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is engineered as a service kit that brings together coated brake rotors and advanced friction material for consistent brake maintenance. The rotors use a corrosion-protective coating and precision machining to support quieter, smoother stops, while the pads are prepared for stable friction performance from the first application. Part number 4504-73035 is a practical choice for Audi A4 and Audi A5 brake service when both rotors and pads need replacement at the same time.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Worn brake pads causing reduced stopping performance
- Rotor rust and surface corrosion
- Brake pulsation from uneven rotor wear
- Noise, vibration, or harshness during braking
- Extended service time from separate rotor and pad sourcing
Installation Notes
Fits 2008-2011 Audi A5, front and rear. Fits 2008-2011 Audi A5 Quattro, front and rear. Fits 2009-2010 Audi A4, front and rear. Fits 2009-2010 Audi A4 Quattro, front and rear.
Before installation, confirm axle position and verify rotor and pad dimensions against the vehicle’s brake system. The rotors are processed dry and ready to install, which helps reduce prep time during brake service. Follow standard brake bedding procedures after installation for proper pad and rotor seating.
Quality Assurance
DFC brake pads are post-cured and scorched for stable friction performance, and the rotors are machined to tight tolerances with 100% inspection of critical attributes. Vented rotors are balance-checked and corrected when needed. DFC GEOSPEC rotors include a 12-month warranty against defects in material and workmanship.
Brake Kit for Audi A4 and A5
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched pads in one service package. It is built for front and rear brake service on select Audi applications, including the Audi A4, Audi A4 Quattro, Audi A5, and Audi A5 Quattro.
Part number 4504-73035 is a complete disc brake kit for drivers looking for an OE-style brake service solution with rotor and pad components matched for the same axle set.
Key Features
- Complete disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and ready to install
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-matched cast iron rotor construction for durability and stability
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is engineered as a service kit that brings together coated brake rotors and advanced friction material for consistent brake maintenance. The rotors use a corrosion-protective coating and precision machining to support quieter, smoother stops, while the pads are prepared for stable friction performance from the first application. Part number 4504-73035 is a practical choice for Audi A4 and Audi A5 brake service when both rotors and pads need replacement at the same time.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Worn brake pads causing reduced stopping performance
- Rotor rust and surface corrosion
- Brake pulsation from uneven rotor wear
- Noise, vibration, or harshness during braking
- Extended service time from separate rotor and pad sourcing
Installation Notes
Fits 2008-2011 Audi A5, front and rear. Fits 2008-2011 Audi A5 Quattro, front and rear. Fits 2009-2010 Audi A4, front and rear. Fits 2009-2010 Audi A4 Quattro, front and rear.
Before installation, confirm axle position and verify rotor and pad dimensions against the vehicle’s brake system. The rotors are processed dry and ready to install, which helps reduce prep time during brake service. Follow standard brake bedding procedures after installation for proper pad and rotor seating.
Quality Assurance
DFC brake pads are post-cured and scorched for stable friction performance, and the rotors are machined to tight tolerances with 100% inspection of critical attributes. Vented rotors are balance-checked and corrected when needed. DFC GEOSPEC rotors include a 12-month warranty against defects in material and workmanship.
Description
Brake Kit for Audi A4 and A5
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched pads in one service package. It is built for front and rear brake service on select Audi applications, including the Audi A4, Audi A4 Quattro, Audi A5, and Audi A5 Quattro.
Part number 4504-73035 is a complete disc brake kit for drivers looking for an OE-style brake service solution with rotor and pad components matched for the same axle set.
Key Features
- Complete disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and ready to install
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-matched cast iron rotor construction for durability and stability
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is engineered as a service kit that brings together coated brake rotors and advanced friction material for consistent brake maintenance. The rotors use a corrosion-protective coating and precision machining to support quieter, smoother stops, while the pads are prepared for stable friction performance from the first application. Part number 4504-73035 is a practical choice for Audi A4 and Audi A5 brake service when both rotors and pads need replacement at the same time.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Worn brake pads causing reduced stopping performance
- Rotor rust and surface corrosion
- Brake pulsation from uneven rotor wear
- Noise, vibration, or harshness during braking
- Extended service time from separate rotor and pad sourcing
Installation Notes
Fits 2008-2011 Audi A5, front and rear. Fits 2008-2011 Audi A5 Quattro, front and rear. Fits 2009-2010 Audi A4, front and rear. Fits 2009-2010 Audi A4 Quattro, front and rear.
Before installation, confirm axle position and verify rotor and pad dimensions against the vehicle’s brake system. The rotors are processed dry and ready to install, which helps reduce prep time during brake service. Follow standard brake bedding procedures after installation for proper pad and rotor seating.
Quality Assurance
DFC brake pads are post-cured and scorched for stable friction performance, and the rotors are machined to tight tolerances with 100% inspection of critical attributes. Vented rotors are balance-checked and corrected when needed. DFC GEOSPEC rotors include a 12-month warranty against defects in material and workmanship.
