Dynamite Friction 4504-73033 Disc Brake Kit - Front and Rear
Brake Kit for Audi TT and TTS Quattro
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a complete disc brake service solution for select Audi TT Quattro and Audi TTS Quattro models. It combines coated rotors with matched friction material for a direct brake service on the front and rear axles.
Part number 4504-73033 is built for drivers looking for an OE-style brake kit for 2008-2011 Audi TT Quattro and 2009-2011 Audi TTS Quattro applications.
Key Features
- Complete disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and ready to install
- Non-directional rotor finish for more even pad bed-in and smoother braking
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-73033 for front and rear brake service
Product Details
The DFC GEOSPEC Rotor and 5000 Advanced Pad line is engineered as a matched brake service package. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions before release. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry-shipped design eliminates rotor cleaning before installation. The pads are formulated for stable friction, with post-curing and scorching steps that reduce initial break-in effort and improve stopping response from the first stop. This makes 4504-73033 a practical choice for Audi TT Quattro and Audi TTS Quattro brake maintenance.
Common Brake Issues This Kit Can Address
- Rotor rust and surface corrosion
- Brake pulsation from worn or uneven rotors
- Noise, vibration, and harshness during braking
- Reduced stopping performance from worn pads
- Uneven pad bed-in after brake service
Installation Notes and Tips
Compatible With 2008-2009 Audi TT Quattro, front and rear, and 2009-2011 Audi TTS Quattro, front and rear. Verify axle coverage before ordering, since this kit is listed for both positions. The rotors are shipped dry and ready to install, and the pad surfaces are prepared to reduce break-in time. For best results, clean the hub mounting surface, inspect calipers and slides, and follow the vehicle manufacturer’s bedding procedure after installation. Part number 4504-73033 is also a useful reference when matching the correct brake service kit for these Audi applications.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. Each rotor is manufactured to OE specifications and backed by a 12-month warranty against defects in material and workmanship. The 5000 Advanced Brake Pads are post-cured and assembled with premium shims to support consistent brake feel and reduced NVH.
Brake Kit for Audi TT and TTS Quattro
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a complete disc brake service solution for select Audi TT Quattro and Audi TTS Quattro models. It combines coated rotors with matched friction material for a direct brake service on the front and rear axles.
Part number 4504-73033 is built for drivers looking for an OE-style brake kit for 2008-2011 Audi TT Quattro and 2009-2011 Audi TTS Quattro applications.
Key Features
- Complete disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and ready to install
- Non-directional rotor finish for more even pad bed-in and smoother braking
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-73033 for front and rear brake service
Product Details
The DFC GEOSPEC Rotor and 5000 Advanced Pad line is engineered as a matched brake service package. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions before release. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry-shipped design eliminates rotor cleaning before installation. The pads are formulated for stable friction, with post-curing and scorching steps that reduce initial break-in effort and improve stopping response from the first stop. This makes 4504-73033 a practical choice for Audi TT Quattro and Audi TTS Quattro brake maintenance.
Common Brake Issues This Kit Can Address
- Rotor rust and surface corrosion
- Brake pulsation from worn or uneven rotors
- Noise, vibration, and harshness during braking
- Reduced stopping performance from worn pads
- Uneven pad bed-in after brake service
Installation Notes and Tips
Compatible With 2008-2009 Audi TT Quattro, front and rear, and 2009-2011 Audi TTS Quattro, front and rear. Verify axle coverage before ordering, since this kit is listed for both positions. The rotors are shipped dry and ready to install, and the pad surfaces are prepared to reduce break-in time. For best results, clean the hub mounting surface, inspect calipers and slides, and follow the vehicle manufacturer’s bedding procedure after installation. Part number 4504-73033 is also a useful reference when matching the correct brake service kit for these Audi applications.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. Each rotor is manufactured to OE specifications and backed by a 12-month warranty against defects in material and workmanship. The 5000 Advanced Brake Pads are post-cured and assembled with premium shims to support consistent brake feel and reduced NVH.
Description
Brake Kit for Audi TT and TTS Quattro
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a complete disc brake service solution for select Audi TT Quattro and Audi TTS Quattro models. It combines coated rotors with matched friction material for a direct brake service on the front and rear axles.
Part number 4504-73033 is built for drivers looking for an OE-style brake kit for 2008-2011 Audi TT Quattro and 2009-2011 Audi TTS Quattro applications.
Key Features
- Complete disc brake kit with rotors and pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and ready to install
- Non-directional rotor finish for more even pad bed-in and smoother braking
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-73033 for front and rear brake service
Product Details
The DFC GEOSPEC Rotor and 5000 Advanced Pad line is engineered as a matched brake service package. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions before release. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry-shipped design eliminates rotor cleaning before installation. The pads are formulated for stable friction, with post-curing and scorching steps that reduce initial break-in effort and improve stopping response from the first stop. This makes 4504-73033 a practical choice for Audi TT Quattro and Audi TTS Quattro brake maintenance.
Common Brake Issues This Kit Can Address
- Rotor rust and surface corrosion
- Brake pulsation from worn or uneven rotors
- Noise, vibration, and harshness during braking
- Reduced stopping performance from worn pads
- Uneven pad bed-in after brake service
Installation Notes and Tips
Compatible With 2008-2009 Audi TT Quattro, front and rear, and 2009-2011 Audi TTS Quattro, front and rear. Verify axle coverage before ordering, since this kit is listed for both positions. The rotors are shipped dry and ready to install, and the pad surfaces are prepared to reduce break-in time. For best results, clean the hub mounting surface, inspect calipers and slides, and follow the vehicle manufacturer’s bedding procedure after installation. Part number 4504-73033 is also a useful reference when matching the correct brake service kit for these Audi applications.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. Each rotor is manufactured to OE specifications and backed by a 12-month warranty against defects in material and workmanship. The 5000 Advanced Brake Pads are post-cured and assembled with premium shims to support consistent brake feel and reduced NVH.
