Dynamite Friction 4504-73030 Disc Brake Kit - Front and Rear
Brake Kit for Audi A8 Quattro and Volkswagen Phaeton
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched pads in one service package. It is built for front and rear brake service on select Audi and Volkswagen applications, including the Audi A8 Quattro and Volkswagen Phaeton.
Key Features
- Disc brake kit with DFC GEOSPEC coated rotors and 5000 Advanced brake pads
- Fits 2004-2010 Audi A8 Quattro, front and rear
- Fits 2004-2006 Volkswagen Phaeton, front and rear
- GeoSpec rotor coating helps resist rust and arrives dry for installation
- Non-directional rotor finish supports even pad bed-in and quieter braking
- 5000 Advanced pads are post-cured, scorched, and fitted with rubber-steel-rubber shims for NVH control
- Part number 4504-73030
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-73030, is a complete brake service kit for drivers replacing worn rotors and pads on the Audi A8 Quattro and Volkswagen Phaeton. The rotors use an OE-style cast iron specification and are machined to tight tolerances, then finished with a non-directional surface to promote consistent pad contact. The coated surface is designed to fight corrosion better than conventional paint or zinc finishes, while the dry packaging helps reduce prep time during installation. The 5000 Advanced pads are processed for stable friction performance and reduced initial break-in, making this kit a practical choice for full axle brake service.
Common Reasons for Replacement
- Brake pulsation or rotor runout during stopping
- Rust buildup on rotor faces or hats
- Squealing, vibration, or harsh brake noise
- Reduced stopping performance from worn pads
- Uneven pad transfer or inconsistent pedal feel
Installation Notes
Fits 2004-2010 Audi A8 Quattro, front and rear, and fits 2004-2006 Volkswagen Phaeton, front and rear. Verify axle position before ordering and compare the existing brake setup to the vehicle listing. The rotors are shipped dry and ready to install, and the non-directional finish supports a smoother bed-in process after installation. Part number 4504-73030 should be matched to the vehicle application before service begins.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when needed. The brake pads are post-cured and scorched for consistent friction behavior, and the rotor set carries a 12-month warranty against defects in material and workmanship. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Brake Kit for Audi A8 Quattro and Volkswagen Phaeton
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched pads in one service package. It is built for front and rear brake service on select Audi and Volkswagen applications, including the Audi A8 Quattro and Volkswagen Phaeton.
Key Features
- Disc brake kit with DFC GEOSPEC coated rotors and 5000 Advanced brake pads
- Fits 2004-2010 Audi A8 Quattro, front and rear
- Fits 2004-2006 Volkswagen Phaeton, front and rear
- GeoSpec rotor coating helps resist rust and arrives dry for installation
- Non-directional rotor finish supports even pad bed-in and quieter braking
- 5000 Advanced pads are post-cured, scorched, and fitted with rubber-steel-rubber shims for NVH control
- Part number 4504-73030
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-73030, is a complete brake service kit for drivers replacing worn rotors and pads on the Audi A8 Quattro and Volkswagen Phaeton. The rotors use an OE-style cast iron specification and are machined to tight tolerances, then finished with a non-directional surface to promote consistent pad contact. The coated surface is designed to fight corrosion better than conventional paint or zinc finishes, while the dry packaging helps reduce prep time during installation. The 5000 Advanced pads are processed for stable friction performance and reduced initial break-in, making this kit a practical choice for full axle brake service.
Common Reasons for Replacement
- Brake pulsation or rotor runout during stopping
- Rust buildup on rotor faces or hats
- Squealing, vibration, or harsh brake noise
- Reduced stopping performance from worn pads
- Uneven pad transfer or inconsistent pedal feel
Installation Notes
Fits 2004-2010 Audi A8 Quattro, front and rear, and fits 2004-2006 Volkswagen Phaeton, front and rear. Verify axle position before ordering and compare the existing brake setup to the vehicle listing. The rotors are shipped dry and ready to install, and the non-directional finish supports a smoother bed-in process after installation. Part number 4504-73030 should be matched to the vehicle application before service begins.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when needed. The brake pads are post-cured and scorched for consistent friction behavior, and the rotor set carries a 12-month warranty against defects in material and workmanship. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Original: $496.21
-65%$496.21
$173.67Description
Brake Kit for Audi A8 Quattro and Volkswagen Phaeton
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched pads in one service package. It is built for front and rear brake service on select Audi and Volkswagen applications, including the Audi A8 Quattro and Volkswagen Phaeton.
Key Features
- Disc brake kit with DFC GEOSPEC coated rotors and 5000 Advanced brake pads
- Fits 2004-2010 Audi A8 Quattro, front and rear
- Fits 2004-2006 Volkswagen Phaeton, front and rear
- GeoSpec rotor coating helps resist rust and arrives dry for installation
- Non-directional rotor finish supports even pad bed-in and quieter braking
- 5000 Advanced pads are post-cured, scorched, and fitted with rubber-steel-rubber shims for NVH control
- Part number 4504-73030
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-73030, is a complete brake service kit for drivers replacing worn rotors and pads on the Audi A8 Quattro and Volkswagen Phaeton. The rotors use an OE-style cast iron specification and are machined to tight tolerances, then finished with a non-directional surface to promote consistent pad contact. The coated surface is designed to fight corrosion better than conventional paint or zinc finishes, while the dry packaging helps reduce prep time during installation. The 5000 Advanced pads are processed for stable friction performance and reduced initial break-in, making this kit a practical choice for full axle brake service.
Common Reasons for Replacement
- Brake pulsation or rotor runout during stopping
- Rust buildup on rotor faces or hats
- Squealing, vibration, or harsh brake noise
- Reduced stopping performance from worn pads
- Uneven pad transfer or inconsistent pedal feel
Installation Notes
Fits 2004-2010 Audi A8 Quattro, front and rear, and fits 2004-2006 Volkswagen Phaeton, front and rear. Verify axle position before ordering and compare the existing brake setup to the vehicle listing. The rotors are shipped dry and ready to install, and the non-directional finish supports a smoother bed-in process after installation. Part number 4504-73030 should be matched to the vehicle application before service begins.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when needed. The brake pads are post-cured and scorched for consistent friction behavior, and the rotor set carries a 12-month warranty against defects in material and workmanship. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
