Dynamite Friction 4504-73029 Disc Brake Kit - Front and Rear
Brake Kit for Audi A6 Quattro
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-73029, is a front and rear disc brake kit for 2009-2011 Audi A6 Quattro armored vehicles. It combines coated rotors and advanced friction pads in one service package for a complete brake replacement on the Audi A6 Quattro.
Key Features
- Fits 2009-2011 Audi A6 Quattro, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install without oil removal
- 5000 Advanced Brake Pads are post-cured for stable friction performance
- Pads are scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims support quieter operation and improved NVH control
- Rotor castings use G3000/G11H18 cast iron specification and OE-style machining tolerances
- Non-directional rotor finish supports even pad bed-in and smoother stops
- Part number 4504-73029
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built as a complete brake service solution, pairing coated rotors with matched pads for front and rear service. For the Audi A6 Quattro, this kit is specified for armored vehicle applications and is engineered to OE-style dimensions and stability requirements. The rotors are processed dry, machined to tight tolerances, and finished to resist rust better than conventional paint or zinc coatings. The pads are formulated for consistent friction, with post-curing and scorching steps that support predictable stopping performance from the first stop. Part number 4504-73029 is a direct service kit reference for this application.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pads
- Rust buildup on exposed rotor surfaces
- Noise and harshness during braking
- Extended service time from separate rotor and pad sourcing
Installation Notes
Compatible With 2009-2011 Audi A6 Quattro, front and rear. Verify axle position and armored vehicle application before installation. The rotors are ready to install as shipped, and the non-directional finish supports a more even pad bed-in after service. Follow standard brake service procedures, inspect related wear components, and confirm proper torque and bedding after installation. Part number 4504-73029 should be matched to the vehicle application before ordering.
Quality Assurance
DFC states that each rotor passes 100% inspection for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors are covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims to support stable friction characteristics and improved NVH control.
Brake Kit for Audi A6 Quattro
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-73029, is a front and rear disc brake kit for 2009-2011 Audi A6 Quattro armored vehicles. It combines coated rotors and advanced friction pads in one service package for a complete brake replacement on the Audi A6 Quattro.
Key Features
- Fits 2009-2011 Audi A6 Quattro, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install without oil removal
- 5000 Advanced Brake Pads are post-cured for stable friction performance
- Pads are scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims support quieter operation and improved NVH control
- Rotor castings use G3000/G11H18 cast iron specification and OE-style machining tolerances
- Non-directional rotor finish supports even pad bed-in and smoother stops
- Part number 4504-73029
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built as a complete brake service solution, pairing coated rotors with matched pads for front and rear service. For the Audi A6 Quattro, this kit is specified for armored vehicle applications and is engineered to OE-style dimensions and stability requirements. The rotors are processed dry, machined to tight tolerances, and finished to resist rust better than conventional paint or zinc coatings. The pads are formulated for consistent friction, with post-curing and scorching steps that support predictable stopping performance from the first stop. Part number 4504-73029 is a direct service kit reference for this application.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pads
- Rust buildup on exposed rotor surfaces
- Noise and harshness during braking
- Extended service time from separate rotor and pad sourcing
Installation Notes
Compatible With 2009-2011 Audi A6 Quattro, front and rear. Verify axle position and armored vehicle application before installation. The rotors are ready to install as shipped, and the non-directional finish supports a more even pad bed-in after service. Follow standard brake service procedures, inspect related wear components, and confirm proper torque and bedding after installation. Part number 4504-73029 should be matched to the vehicle application before ordering.
Quality Assurance
DFC states that each rotor passes 100% inspection for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors are covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims to support stable friction characteristics and improved NVH control.
Original: $506.23
-65%$506.23
$177.18Description
Brake Kit for Audi A6 Quattro
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-73029, is a front and rear disc brake kit for 2009-2011 Audi A6 Quattro armored vehicles. It combines coated rotors and advanced friction pads in one service package for a complete brake replacement on the Audi A6 Quattro.
Key Features
- Fits 2009-2011 Audi A6 Quattro, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and are ready to install without oil removal
- 5000 Advanced Brake Pads are post-cured for stable friction performance
- Pads are scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims support quieter operation and improved NVH control
- Rotor castings use G3000/G11H18 cast iron specification and OE-style machining tolerances
- Non-directional rotor finish supports even pad bed-in and smoother stops
- Part number 4504-73029
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built as a complete brake service solution, pairing coated rotors with matched pads for front and rear service. For the Audi A6 Quattro, this kit is specified for armored vehicle applications and is engineered to OE-style dimensions and stability requirements. The rotors are processed dry, machined to tight tolerances, and finished to resist rust better than conventional paint or zinc coatings. The pads are formulated for consistent friction, with post-curing and scorching steps that support predictable stopping performance from the first stop. Part number 4504-73029 is a direct service kit reference for this application.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pads
- Rust buildup on exposed rotor surfaces
- Noise and harshness during braking
- Extended service time from separate rotor and pad sourcing
Installation Notes
Compatible With 2009-2011 Audi A6 Quattro, front and rear. Verify axle position and armored vehicle application before installation. The rotors are ready to install as shipped, and the non-directional finish supports a more even pad bed-in after service. Follow standard brake service procedures, inspect related wear components, and confirm proper torque and bedding after installation. Part number 4504-73029 should be matched to the vehicle application before ordering.
Quality Assurance
DFC states that each rotor passes 100% inspection for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors are covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims to support stable friction characteristics and improved NVH control.
