Dynamite Friction 4504-73018 Disc Brake Kit - Front and Rear
Brake Kit for Audi A4 and A4 Quattro
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched friction material for a complete front and rear brake service. It is built for 2002-2006 Audi A4 and 2002-2004 Audi A4 Quattro applications, with a 288mm front rotor note for the 2005 Audi A4 Quattro.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time before installation
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-73018 for ordering and fitment verification
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a service kit for Audi A4 and Audi A4 Quattro brake maintenance. The rotors arrive dry and ready to install, with a protective coating that resists rust and is removed naturally by the brake pads during normal use. The pads are processed to reduce initial break-in and provide consistent friction from the first stop. This kit is a practical choice for drivers replacing worn brake components on a 2002-2006 Audi A4 or a 2002-2004 Audi A4 Quattro, and it also covers the 2005 Audi A4 Quattro with 288mm front rotors. Part number 4504-73018 identifies this exact brake kit.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance caused by aged pads
- Noise, vibration, and harshness during braking
- Rust buildup on exposed rotor surfaces
- Longer service time caused by oil-coated replacement rotors
Installation Notes and Tips
Verify rotor size and axle position before installation, especially on the 2005 Audi A4 Quattro with 288mm front rotors. Clean all mating surfaces, inspect calipers and hardware condition, and follow proper bedding procedures after installation. The rotors are processed dry, so no additional cleaning is needed before mounting. Confirm the vehicle application against part number 4504-73018 before service.
Quality Assurance
DFC manufactures the pads with post-curing and scorching steps to improve friction consistency and reduce break-in time. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance. DFC GEOSPEC rotors include a 12-month warranty against defects in material and workmanship.
Brake Kit for Audi A4 and A4 Quattro
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched friction material for a complete front and rear brake service. It is built for 2002-2006 Audi A4 and 2002-2004 Audi A4 Quattro applications, with a 288mm front rotor note for the 2005 Audi A4 Quattro.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time before installation
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-73018 for ordering and fitment verification
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a service kit for Audi A4 and Audi A4 Quattro brake maintenance. The rotors arrive dry and ready to install, with a protective coating that resists rust and is removed naturally by the brake pads during normal use. The pads are processed to reduce initial break-in and provide consistent friction from the first stop. This kit is a practical choice for drivers replacing worn brake components on a 2002-2006 Audi A4 or a 2002-2004 Audi A4 Quattro, and it also covers the 2005 Audi A4 Quattro with 288mm front rotors. Part number 4504-73018 identifies this exact brake kit.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance caused by aged pads
- Noise, vibration, and harshness during braking
- Rust buildup on exposed rotor surfaces
- Longer service time caused by oil-coated replacement rotors
Installation Notes and Tips
Verify rotor size and axle position before installation, especially on the 2005 Audi A4 Quattro with 288mm front rotors. Clean all mating surfaces, inspect calipers and hardware condition, and follow proper bedding procedures after installation. The rotors are processed dry, so no additional cleaning is needed before mounting. Confirm the vehicle application against part number 4504-73018 before service.
Quality Assurance
DFC manufactures the pads with post-curing and scorching steps to improve friction consistency and reduce break-in time. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance. DFC GEOSPEC rotors include a 12-month warranty against defects in material and workmanship.
Original: $287.88
-65%$287.88
$100.76Description
Brake Kit for Audi A4 and A4 Quattro
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched friction material for a complete front and rear brake service. It is built for 2002-2006 Audi A4 and 2002-2004 Audi A4 Quattro applications, with a 288mm front rotor note for the 2005 Audi A4 Quattro.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time before installation
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-73018 for ordering and fitment verification
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a service kit for Audi A4 and Audi A4 Quattro brake maintenance. The rotors arrive dry and ready to install, with a protective coating that resists rust and is removed naturally by the brake pads during normal use. The pads are processed to reduce initial break-in and provide consistent friction from the first stop. This kit is a practical choice for drivers replacing worn brake components on a 2002-2006 Audi A4 or a 2002-2004 Audi A4 Quattro, and it also covers the 2005 Audi A4 Quattro with 288mm front rotors. Part number 4504-73018 identifies this exact brake kit.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance caused by aged pads
- Noise, vibration, and harshness during braking
- Rust buildup on exposed rotor surfaces
- Longer service time caused by oil-coated replacement rotors
Installation Notes and Tips
Verify rotor size and axle position before installation, especially on the 2005 Audi A4 Quattro with 288mm front rotors. Clean all mating surfaces, inspect calipers and hardware condition, and follow proper bedding procedures after installation. The rotors are processed dry, so no additional cleaning is needed before mounting. Confirm the vehicle application against part number 4504-73018 before service.
Quality Assurance
DFC manufactures the pads with post-curing and scorching steps to improve friction consistency and reduce break-in time. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance. DFC GEOSPEC rotors include a 12-month warranty against defects in material and workmanship.
