Dynamite Friction 4504-73009 Disc Brake Kit - Front and Rear
Brake Kit for Audi S4 Front and Rear
Restore braking performance on the 2000-2002 Audi S4 with a complete disc brake kit that combines DFC GEOSPEC coated rotors and DFC 5000 Advanced brake pads. Part number 4504-73009 is built for front and rear service on this application, giving you matched components in one package.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- Fits 2000-2002 Audi S4, front and rear
- DFC GEOSPEC rotors feature a silver-gray corrosion-resistant coating
- Rotors are shipped dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-73009
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is engineered as a matched brake service solution for drivers who want OE-style fitment and consistent braking behavior. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to promote smoother pad contact. The coated rotor surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging eliminates the need to clean oil from the rotor before installation. The 5000 Advanced pads are formulated for stable friction output and are assembled with NVH-focused shims for improved refinement. Part number 4504-73009 is a direct service option for the Audi S4 brake system.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pads
- Brake noise caused by pad wear or rotor surface condition
- Rust buildup on exposed rotor surfaces
- Longer service time when replacing pads and rotors separately
Installation Notes
Fits 2000-2002 Audi S4, front and rear. Inspect calipers, slides, and brake fluid condition before installation. Clean the hub mounting surface thoroughly so the new rotors seat flat, and follow proper pad bed-in procedures after installation. Because the rotors are shipped dry, no oil removal step is needed before service. Verify left and right components against the vehicle before beginning brake work.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the electronic mill-balance process. Final inspection checks key OE-spec attributes before shipment. DFC backs the rotors with a 12-month warranty against defects in material and workmanship. Part number 4504-73009 is built for dependable service on the Audi S4 brake application.
Brake Kit for Audi S4 Front and Rear
Restore braking performance on the 2000-2002 Audi S4 with a complete disc brake kit that combines DFC GEOSPEC coated rotors and DFC 5000 Advanced brake pads. Part number 4504-73009 is built for front and rear service on this application, giving you matched components in one package.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- Fits 2000-2002 Audi S4, front and rear
- DFC GEOSPEC rotors feature a silver-gray corrosion-resistant coating
- Rotors are shipped dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-73009
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is engineered as a matched brake service solution for drivers who want OE-style fitment and consistent braking behavior. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to promote smoother pad contact. The coated rotor surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging eliminates the need to clean oil from the rotor before installation. The 5000 Advanced pads are formulated for stable friction output and are assembled with NVH-focused shims for improved refinement. Part number 4504-73009 is a direct service option for the Audi S4 brake system.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pads
- Brake noise caused by pad wear or rotor surface condition
- Rust buildup on exposed rotor surfaces
- Longer service time when replacing pads and rotors separately
Installation Notes
Fits 2000-2002 Audi S4, front and rear. Inspect calipers, slides, and brake fluid condition before installation. Clean the hub mounting surface thoroughly so the new rotors seat flat, and follow proper pad bed-in procedures after installation. Because the rotors are shipped dry, no oil removal step is needed before service. Verify left and right components against the vehicle before beginning brake work.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the electronic mill-balance process. Final inspection checks key OE-spec attributes before shipment. DFC backs the rotors with a 12-month warranty against defects in material and workmanship. Part number 4504-73009 is built for dependable service on the Audi S4 brake application.
Original: $384.93
-65%$384.93
$134.73Description
Brake Kit for Audi S4 Front and Rear
Restore braking performance on the 2000-2002 Audi S4 with a complete disc brake kit that combines DFC GEOSPEC coated rotors and DFC 5000 Advanced brake pads. Part number 4504-73009 is built for front and rear service on this application, giving you matched components in one package.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- Fits 2000-2002 Audi S4, front and rear
- DFC GEOSPEC rotors feature a silver-gray corrosion-resistant coating
- Rotors are shipped dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-73009
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is engineered as a matched brake service solution for drivers who want OE-style fitment and consistent braking behavior. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to promote smoother pad contact. The coated rotor surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging eliminates the need to clean oil from the rotor before installation. The 5000 Advanced pads are formulated for stable friction output and are assembled with NVH-focused shims for improved refinement. Part number 4504-73009 is a direct service option for the Audi S4 brake system.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pads
- Brake noise caused by pad wear or rotor surface condition
- Rust buildup on exposed rotor surfaces
- Longer service time when replacing pads and rotors separately
Installation Notes
Fits 2000-2002 Audi S4, front and rear. Inspect calipers, slides, and brake fluid condition before installation. Clean the hub mounting surface thoroughly so the new rotors seat flat, and follow proper pad bed-in procedures after installation. Because the rotors are shipped dry, no oil removal step is needed before service. Verify left and right components against the vehicle before beginning brake work.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the electronic mill-balance process. Final inspection checks key OE-spec attributes before shipment. DFC backs the rotors with a 12-month warranty against defects in material and workmanship. Part number 4504-73009 is built for dependable service on the Audi S4 brake application.
