Dynamite Friction 4504-68007 Disc Brake Kit - Front and Rear
Brake Kit for Infiniti G35 and Nissan 350Z
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched friction material for a complete front and rear brake service. Part number 4504-68007 is built for specific OE-style applications on the Infiniti G35 and Nissan 350Z.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish supports faster pad bed-in and smoother braking
- 5000 Advanced pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims help improve noise, vibration, and harshness control
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched brake service solution for drivers who want OE-style fitment and consistent braking performance. The coated rotors resist rust better than conventional paint or zinc finishes, while the pad compound is formulated for stable friction and cleaner initial operation. Part number 4504-68007 is a practical choice for a complete brake refresh on the Infiniti G35 and Nissan 350Z, including 2003-2005 Nissan 350Z front and rear applications and 2003-2005 Infiniti G35 front and rear applications.
This part cross-references no listed alternate part numbers in the provided data.
What It Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pads
- Surface rust on exposed rotor hats and edges
- Brake noise caused by worn friction material or poor pad damping
- Longer service time from rotors that require cleaning before installation
Installation Notes
Compatible With 2004-2005 INFINITI G35, front and rear. Compatible With 2003-2005 Nissan 350Z, front and rear. Compatible With 2003-2004 INFINITI G35, front and rear. Verify standard brake configuration before ordering, since the Nissan 350Z listing notes standard brakes. Follow proper brake service procedures, clean mating surfaces, and bed in the pads according to the vehicle service process after installation. Part number 4504-68007 is supplied as a rotor-and-pad kit for axle-level brake replacement.
Quality Assurance
DFC brake pads are post-cured and scorched for stable friction performance, and the rotors are machined to tight tolerances with a non-directional finish and 100% inspection of critical attributes. Vented rotors are balance-checked and corrected when needed. DFC GEOSPEC rotors include a 12-month warranty against defects in material and workmanship.
Brake Kit for Infiniti G35 and Nissan 350Z
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched friction material for a complete front and rear brake service. Part number 4504-68007 is built for specific OE-style applications on the Infiniti G35 and Nissan 350Z.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish supports faster pad bed-in and smoother braking
- 5000 Advanced pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims help improve noise, vibration, and harshness control
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched brake service solution for drivers who want OE-style fitment and consistent braking performance. The coated rotors resist rust better than conventional paint or zinc finishes, while the pad compound is formulated for stable friction and cleaner initial operation. Part number 4504-68007 is a practical choice for a complete brake refresh on the Infiniti G35 and Nissan 350Z, including 2003-2005 Nissan 350Z front and rear applications and 2003-2005 Infiniti G35 front and rear applications.
This part cross-references no listed alternate part numbers in the provided data.
What It Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pads
- Surface rust on exposed rotor hats and edges
- Brake noise caused by worn friction material or poor pad damping
- Longer service time from rotors that require cleaning before installation
Installation Notes
Compatible With 2004-2005 INFINITI G35, front and rear. Compatible With 2003-2005 Nissan 350Z, front and rear. Compatible With 2003-2004 INFINITI G35, front and rear. Verify standard brake configuration before ordering, since the Nissan 350Z listing notes standard brakes. Follow proper brake service procedures, clean mating surfaces, and bed in the pads according to the vehicle service process after installation. Part number 4504-68007 is supplied as a rotor-and-pad kit for axle-level brake replacement.
Quality Assurance
DFC brake pads are post-cured and scorched for stable friction performance, and the rotors are machined to tight tolerances with a non-directional finish and 100% inspection of critical attributes. Vented rotors are balance-checked and corrected when needed. DFC GEOSPEC rotors include a 12-month warranty against defects in material and workmanship.
Original: $310.48
-65%$310.48
$108.67Description
Brake Kit for Infiniti G35 and Nissan 350Z
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched friction material for a complete front and rear brake service. Part number 4504-68007 is built for specific OE-style applications on the Infiniti G35 and Nissan 350Z.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish supports faster pad bed-in and smoother braking
- 5000 Advanced pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims help improve noise, vibration, and harshness control
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched brake service solution for drivers who want OE-style fitment and consistent braking performance. The coated rotors resist rust better than conventional paint or zinc finishes, while the pad compound is formulated for stable friction and cleaner initial operation. Part number 4504-68007 is a practical choice for a complete brake refresh on the Infiniti G35 and Nissan 350Z, including 2003-2005 Nissan 350Z front and rear applications and 2003-2005 Infiniti G35 front and rear applications.
This part cross-references no listed alternate part numbers in the provided data.
What It Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pads
- Surface rust on exposed rotor hats and edges
- Brake noise caused by worn friction material or poor pad damping
- Longer service time from rotors that require cleaning before installation
Installation Notes
Compatible With 2004-2005 INFINITI G35, front and rear. Compatible With 2003-2005 Nissan 350Z, front and rear. Compatible With 2003-2004 INFINITI G35, front and rear. Verify standard brake configuration before ordering, since the Nissan 350Z listing notes standard brakes. Follow proper brake service procedures, clean mating surfaces, and bed in the pads according to the vehicle service process after installation. Part number 4504-68007 is supplied as a rotor-and-pad kit for axle-level brake replacement.
Quality Assurance
DFC brake pads are post-cured and scorched for stable friction performance, and the rotors are machined to tight tolerances with a non-directional finish and 100% inspection of critical attributes. Vented rotors are balance-checked and corrected when needed. DFC GEOSPEC rotors include a 12-month warranty against defects in material and workmanship.
