Dynamite Friction 4504-67042 Disc Brake Kit - Front and Rear
Brake Kit for Nissan Rogue and X-Trail
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched friction material for front and rear service. It is built for 2014-2019 Nissan Rogue and 2015-2016 Nissan X-Trail applications listed below, including 3-row seating configurations where noted.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and ready to install, with no oil coating to remove
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and quieter braking
- 100% inspected for critical dimensions, balance, and OE specification compliance
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-67042 for ordering and catalog lookup
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a complete disc brake kit for front and rear service. The rotor coating helps resist rust better than conventional paint or zinc finishes, while the dry packaging saves prep time during installation. The pads are formulated for consistent friction across a range of vehicle demands, and the shim design supports smoother operation. This kit is a practical OE-style brake service solution for Nissan Rogue and Nissan X-Trail owners who need matched components in one package. Part number 4504-67042 is also useful when cross-checking brake service records or replacement needs.
What This Brake Kit Helps Address
- Brake noise during everyday stopping
- Rotor rust and surface corrosion
- Uneven pad bed-in after brake service
- Brake vibration caused by worn or out-of-spec rotors
- Reduced stopping consistency from aged pads and rotors
Installation Notes and Fitment
- Fits 2017-2019 Nissan Rogue, front and rear
- Fits 2014-2017 Nissan Rogue, front and rear, 3-row seating (7 passenger)
- Fits 2015-2016 Nissan X-Trail, front and rear, 3-row seats (7 passenger vehicle)
Before installation, confirm axle position and vehicle configuration against the listed fitment. The rotors are processed dry and ready to install, and the non-directional finish supports a more even pad bed-in after service. Use standard brake service procedures and verify rotor and pad orientation during assembly.
Quality Assurance
Each rotor is machined to tight tolerances, inspected for critical attributes, and checked for balance on vented applications. DFC states that every rotor is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured, scorched, and assembled with premium shims to support stable performance and reduced NVH.
Brake Kit for Nissan Rogue and X-Trail
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched friction material for front and rear service. It is built for 2014-2019 Nissan Rogue and 2015-2016 Nissan X-Trail applications listed below, including 3-row seating configurations where noted.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and ready to install, with no oil coating to remove
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and quieter braking
- 100% inspected for critical dimensions, balance, and OE specification compliance
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-67042 for ordering and catalog lookup
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a complete disc brake kit for front and rear service. The rotor coating helps resist rust better than conventional paint or zinc finishes, while the dry packaging saves prep time during installation. The pads are formulated for consistent friction across a range of vehicle demands, and the shim design supports smoother operation. This kit is a practical OE-style brake service solution for Nissan Rogue and Nissan X-Trail owners who need matched components in one package. Part number 4504-67042 is also useful when cross-checking brake service records or replacement needs.
What This Brake Kit Helps Address
- Brake noise during everyday stopping
- Rotor rust and surface corrosion
- Uneven pad bed-in after brake service
- Brake vibration caused by worn or out-of-spec rotors
- Reduced stopping consistency from aged pads and rotors
Installation Notes and Fitment
- Fits 2017-2019 Nissan Rogue, front and rear
- Fits 2014-2017 Nissan Rogue, front and rear, 3-row seating (7 passenger)
- Fits 2015-2016 Nissan X-Trail, front and rear, 3-row seats (7 passenger vehicle)
Before installation, confirm axle position and vehicle configuration against the listed fitment. The rotors are processed dry and ready to install, and the non-directional finish supports a more even pad bed-in after service. Use standard brake service procedures and verify rotor and pad orientation during assembly.
Quality Assurance
Each rotor is machined to tight tolerances, inspected for critical attributes, and checked for balance on vented applications. DFC states that every rotor is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured, scorched, and assembled with premium shims to support stable performance and reduced NVH.
Description
Brake Kit for Nissan Rogue and X-Trail
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched friction material for front and rear service. It is built for 2014-2019 Nissan Rogue and 2015-2016 Nissan X-Trail applications listed below, including 3-row seating configurations where noted.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and ready to install, with no oil coating to remove
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and quieter braking
- 100% inspected for critical dimensions, balance, and OE specification compliance
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-67042 for ordering and catalog lookup
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a complete disc brake kit for front and rear service. The rotor coating helps resist rust better than conventional paint or zinc finishes, while the dry packaging saves prep time during installation. The pads are formulated for consistent friction across a range of vehicle demands, and the shim design supports smoother operation. This kit is a practical OE-style brake service solution for Nissan Rogue and Nissan X-Trail owners who need matched components in one package. Part number 4504-67042 is also useful when cross-checking brake service records or replacement needs.
What This Brake Kit Helps Address
- Brake noise during everyday stopping
- Rotor rust and surface corrosion
- Uneven pad bed-in after brake service
- Brake vibration caused by worn or out-of-spec rotors
- Reduced stopping consistency from aged pads and rotors
Installation Notes and Fitment
- Fits 2017-2019 Nissan Rogue, front and rear
- Fits 2014-2017 Nissan Rogue, front and rear, 3-row seating (7 passenger)
- Fits 2015-2016 Nissan X-Trail, front and rear, 3-row seats (7 passenger vehicle)
Before installation, confirm axle position and vehicle configuration against the listed fitment. The rotors are processed dry and ready to install, and the non-directional finish supports a more even pad bed-in after service. Use standard brake service procedures and verify rotor and pad orientation during assembly.
Quality Assurance
Each rotor is machined to tight tolerances, inspected for critical attributes, and checked for balance on vented applications. DFC states that every rotor is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured, scorched, and assembled with premium shims to support stable performance and reduced NVH.
