Dynamite Friction 4504-67028 Disc Brake Kit - Front and Rear
Brake Kit for Nissan Titan and Armada
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front and rear disc brake kit built for select Nissan Titan, Nissan Armada, and Infiniti QX56 applications. Part number 4504-67028 combines coated rotors and matched pads in one service package for a cleaner, more efficient brake job.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and ready to install, with no oil coating to remove
- G3000/G11H18 cast iron construction engineered to OE specifications
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 100% inspected for critical dimensions and rotor balance on vented applications
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Detailed Description
Part number 4504-67028 is a complete brake service kit from Dynamite Friction that pairs DFC GEOSPEC coated rotors with DFC 5000 Advanced Brake Pads. The rotor coating is designed to resist rust better than conventional paint or zinc finishes, while the dry-shipped design helps reduce prep time during installation. The pads are formulated for consistent friction, with post-curing and scorching used to reduce initial break-in requirements and improve stopping response from the first stop.
This kit is a direct fit for 2005-2007 Nissan Titan, 2005-2006 Nissan Armada, and 2005-2006 Infiniti QX56 front and rear brake service, with application notes for specific caliper and rotor configurations. It is a practical choice for drivers servicing a Nissan Titan brake kit, Nissan Armada brake kit, or Infiniti QX56 brake kit with matched rotor and pad components. Part number 4504-67028 is also a useful reference when searching for a complete disc brake kit for these vehicles.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance caused by pad wear
- Rust buildup on exposed rotor surfaces
- Brake noise and vibration during everyday driving
- Longer service time from cleaning oil-coated replacement rotors
Installation Notes and Fitment
- Fits 2007 Nissan Titan, front and rear, vehicle production date to 3/07
- Fits 2006 Nissan Titan, front and rear
- Fits 2005 Nissan Titan, front and rear, vehicle production date from 3/05
- Fits 2006 Nissan Armada, front and rear, vehicle production date from 3/06; Bosch front caliper casting 262 569; 320mm front rotors
- Fits 2005 Nissan Armada, front and rear, vehicle production date from 3/05
- Fits 2005-2006 Infiniti QX56, front and rear; Bosch front calipers; 320mm front disc
Verify rotor size, caliper type, and vehicle production date before ordering. This kit is intended for front and rear brake service on the listed applications only. Part number 4504-67028 should be matched to the exact brake configuration shown in the fitment notes.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, checked for balance on vented designs, and inspected against OE specifications before release. DFC 5000 Advanced Brake Pads are post-cured, scorched, and assembled with premium shims for consistent performance and improved NVH control. Rotors include a 12-month warranty against defects in material and workmanship.
Brake Kit for Nissan Titan and Armada
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front and rear disc brake kit built for select Nissan Titan, Nissan Armada, and Infiniti QX56 applications. Part number 4504-67028 combines coated rotors and matched pads in one service package for a cleaner, more efficient brake job.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and ready to install, with no oil coating to remove
- G3000/G11H18 cast iron construction engineered to OE specifications
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 100% inspected for critical dimensions and rotor balance on vented applications
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Detailed Description
Part number 4504-67028 is a complete brake service kit from Dynamite Friction that pairs DFC GEOSPEC coated rotors with DFC 5000 Advanced Brake Pads. The rotor coating is designed to resist rust better than conventional paint or zinc finishes, while the dry-shipped design helps reduce prep time during installation. The pads are formulated for consistent friction, with post-curing and scorching used to reduce initial break-in requirements and improve stopping response from the first stop.
This kit is a direct fit for 2005-2007 Nissan Titan, 2005-2006 Nissan Armada, and 2005-2006 Infiniti QX56 front and rear brake service, with application notes for specific caliper and rotor configurations. It is a practical choice for drivers servicing a Nissan Titan brake kit, Nissan Armada brake kit, or Infiniti QX56 brake kit with matched rotor and pad components. Part number 4504-67028 is also a useful reference when searching for a complete disc brake kit for these vehicles.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance caused by pad wear
- Rust buildup on exposed rotor surfaces
- Brake noise and vibration during everyday driving
- Longer service time from cleaning oil-coated replacement rotors
Installation Notes and Fitment
- Fits 2007 Nissan Titan, front and rear, vehicle production date to 3/07
- Fits 2006 Nissan Titan, front and rear
- Fits 2005 Nissan Titan, front and rear, vehicle production date from 3/05
- Fits 2006 Nissan Armada, front and rear, vehicle production date from 3/06; Bosch front caliper casting 262 569; 320mm front rotors
- Fits 2005 Nissan Armada, front and rear, vehicle production date from 3/05
- Fits 2005-2006 Infiniti QX56, front and rear; Bosch front calipers; 320mm front disc
Verify rotor size, caliper type, and vehicle production date before ordering. This kit is intended for front and rear brake service on the listed applications only. Part number 4504-67028 should be matched to the exact brake configuration shown in the fitment notes.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, checked for balance on vented designs, and inspected against OE specifications before release. DFC 5000 Advanced Brake Pads are post-cured, scorched, and assembled with premium shims for consistent performance and improved NVH control. Rotors include a 12-month warranty against defects in material and workmanship.
Description
Brake Kit for Nissan Titan and Armada
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front and rear disc brake kit built for select Nissan Titan, Nissan Armada, and Infiniti QX56 applications. Part number 4504-67028 combines coated rotors and matched pads in one service package for a cleaner, more efficient brake job.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Rotors ship dry and ready to install, with no oil coating to remove
- G3000/G11H18 cast iron construction engineered to OE specifications
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 100% inspected for critical dimensions and rotor balance on vented applications
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Detailed Description
Part number 4504-67028 is a complete brake service kit from Dynamite Friction that pairs DFC GEOSPEC coated rotors with DFC 5000 Advanced Brake Pads. The rotor coating is designed to resist rust better than conventional paint or zinc finishes, while the dry-shipped design helps reduce prep time during installation. The pads are formulated for consistent friction, with post-curing and scorching used to reduce initial break-in requirements and improve stopping response from the first stop.
This kit is a direct fit for 2005-2007 Nissan Titan, 2005-2006 Nissan Armada, and 2005-2006 Infiniti QX56 front and rear brake service, with application notes for specific caliper and rotor configurations. It is a practical choice for drivers servicing a Nissan Titan brake kit, Nissan Armada brake kit, or Infiniti QX56 brake kit with matched rotor and pad components. Part number 4504-67028 is also a useful reference when searching for a complete disc brake kit for these vehicles.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance caused by pad wear
- Rust buildup on exposed rotor surfaces
- Brake noise and vibration during everyday driving
- Longer service time from cleaning oil-coated replacement rotors
Installation Notes and Fitment
- Fits 2007 Nissan Titan, front and rear, vehicle production date to 3/07
- Fits 2006 Nissan Titan, front and rear
- Fits 2005 Nissan Titan, front and rear, vehicle production date from 3/05
- Fits 2006 Nissan Armada, front and rear, vehicle production date from 3/06; Bosch front caliper casting 262 569; 320mm front rotors
- Fits 2005 Nissan Armada, front and rear, vehicle production date from 3/05
- Fits 2005-2006 Infiniti QX56, front and rear; Bosch front calipers; 320mm front disc
Verify rotor size, caliper type, and vehicle production date before ordering. This kit is intended for front and rear brake service on the listed applications only. Part number 4504-67028 should be matched to the exact brake configuration shown in the fitment notes.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, checked for balance on vented designs, and inspected against OE specifications before release. DFC 5000 Advanced Brake Pads are post-cured, scorched, and assembled with premium shims for consistent performance and improved NVH control. Rotors include a 12-month warranty against defects in material and workmanship.
