Dynamite Friction 4504-67022 Disc Brake Kit - Front and Rear
Brake Kit for Nissan Murano and INFINITI FX35/FX45
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-67022, is a complete disc brake kit for front and rear service on select Nissan Murano and INFINITI FX models. It combines coated rotors with matched friction material for a straightforward brake replacement on covered applications.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray protective finish to resist rust better than conventional paint or zinc coatings
- Dry-processed, dry-shipped rotors ready for installation without additional cleaning
- G3000/G11H18 cast iron rotor construction engineered to OE specifications
- Non-directional rotor finish for more even pad bed-in, quieter operation, and smoother stops
- 100% inspected rotors with balance correction on vented rotors when needed
- DFC 5000 Advanced pads are post-cured, scorched, and fitted with premium rubber-steel-rubber shims for improved NVH control
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built for drivers who want a matched brake service kit with OE-style fit and finish. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected to confirm critical dimensions. The pads are post-cured for stable friction performance and scorched to reduce uncured bonding agents, which helps shorten initial break-in. This part number 4504-67022 is a practical choice for a front and rear brake refresh on the Nissan Murano and INFINITI FX35/FX45 applications listed below.
Vehicle Fitment
- Fits 2009-2011 Nissan Murano, front and rear
- Fits 2005-2007 Nissan Murano, front and rear
- Fits 2004 Nissan Murano, front and rear; vehicle production date from 3/04
- Fits 2003-2004 INFINITI FX35, front and rear
- Fits 2005 INFINITI FX35, front and rear; vehicle production date to 11/05
- Fits 2003-2004 INFINITI FX45, front and rear
- Fits 2005 INFINITI FX45, front and rear; vehicle production date to 11/05
Common Brake Issues This Kit Addresses
- Brake pulsation from worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise and vibration during braking
- Reduced stopping consistency from aged pads
- Extended service time from cleaning oil-coated replacement rotors
Installation Notes
These rotors are shipped dry and ready to install, which helps reduce prep time during brake service. For best results, confirm vehicle production date on 2004 Nissan Murano and 2005 INFINITI FX35/FX45 applications before ordering. Follow standard brake service procedures and bed-in recommendations after installation.
Quality Assurance
Each rotor is processed to OE specifications, inspected for critical attributes, and backed by a 12-month warranty against defects in material and workmanship. The DFC 5000 Advanced pads are manufactured with post-curing, scorching, and premium shims to support consistent brake performance and NVH control.
Brake Kit for Nissan Murano and INFINITI FX35/FX45
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-67022, is a complete disc brake kit for front and rear service on select Nissan Murano and INFINITI FX models. It combines coated rotors with matched friction material for a straightforward brake replacement on covered applications.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray protective finish to resist rust better than conventional paint or zinc coatings
- Dry-processed, dry-shipped rotors ready for installation without additional cleaning
- G3000/G11H18 cast iron rotor construction engineered to OE specifications
- Non-directional rotor finish for more even pad bed-in, quieter operation, and smoother stops
- 100% inspected rotors with balance correction on vented rotors when needed
- DFC 5000 Advanced pads are post-cured, scorched, and fitted with premium rubber-steel-rubber shims for improved NVH control
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built for drivers who want a matched brake service kit with OE-style fit and finish. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected to confirm critical dimensions. The pads are post-cured for stable friction performance and scorched to reduce uncured bonding agents, which helps shorten initial break-in. This part number 4504-67022 is a practical choice for a front and rear brake refresh on the Nissan Murano and INFINITI FX35/FX45 applications listed below.
Vehicle Fitment
- Fits 2009-2011 Nissan Murano, front and rear
- Fits 2005-2007 Nissan Murano, front and rear
- Fits 2004 Nissan Murano, front and rear; vehicle production date from 3/04
- Fits 2003-2004 INFINITI FX35, front and rear
- Fits 2005 INFINITI FX35, front and rear; vehicle production date to 11/05
- Fits 2003-2004 INFINITI FX45, front and rear
- Fits 2005 INFINITI FX45, front and rear; vehicle production date to 11/05
Common Brake Issues This Kit Addresses
- Brake pulsation from worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise and vibration during braking
- Reduced stopping consistency from aged pads
- Extended service time from cleaning oil-coated replacement rotors
Installation Notes
These rotors are shipped dry and ready to install, which helps reduce prep time during brake service. For best results, confirm vehicle production date on 2004 Nissan Murano and 2005 INFINITI FX35/FX45 applications before ordering. Follow standard brake service procedures and bed-in recommendations after installation.
Quality Assurance
Each rotor is processed to OE specifications, inspected for critical attributes, and backed by a 12-month warranty against defects in material and workmanship. The DFC 5000 Advanced pads are manufactured with post-curing, scorching, and premium shims to support consistent brake performance and NVH control.
Description
Brake Kit for Nissan Murano and INFINITI FX35/FX45
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-67022, is a complete disc brake kit for front and rear service on select Nissan Murano and INFINITI FX models. It combines coated rotors with matched friction material for a straightforward brake replacement on covered applications.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray protective finish to resist rust better than conventional paint or zinc coatings
- Dry-processed, dry-shipped rotors ready for installation without additional cleaning
- G3000/G11H18 cast iron rotor construction engineered to OE specifications
- Non-directional rotor finish for more even pad bed-in, quieter operation, and smoother stops
- 100% inspected rotors with balance correction on vented rotors when needed
- DFC 5000 Advanced pads are post-cured, scorched, and fitted with premium rubber-steel-rubber shims for improved NVH control
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built for drivers who want a matched brake service kit with OE-style fit and finish. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected to confirm critical dimensions. The pads are post-cured for stable friction performance and scorched to reduce uncured bonding agents, which helps shorten initial break-in. This part number 4504-67022 is a practical choice for a front and rear brake refresh on the Nissan Murano and INFINITI FX35/FX45 applications listed below.
Vehicle Fitment
- Fits 2009-2011 Nissan Murano, front and rear
- Fits 2005-2007 Nissan Murano, front and rear
- Fits 2004 Nissan Murano, front and rear; vehicle production date from 3/04
- Fits 2003-2004 INFINITI FX35, front and rear
- Fits 2005 INFINITI FX35, front and rear; vehicle production date to 11/05
- Fits 2003-2004 INFINITI FX45, front and rear
- Fits 2005 INFINITI FX45, front and rear; vehicle production date to 11/05
Common Brake Issues This Kit Addresses
- Brake pulsation from worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise and vibration during braking
- Reduced stopping consistency from aged pads
- Extended service time from cleaning oil-coated replacement rotors
Installation Notes
These rotors are shipped dry and ready to install, which helps reduce prep time during brake service. For best results, confirm vehicle production date on 2004 Nissan Murano and 2005 INFINITI FX35/FX45 applications before ordering. Follow standard brake service procedures and bed-in recommendations after installation.
Quality Assurance
Each rotor is processed to OE specifications, inspected for critical attributes, and backed by a 12-month warranty against defects in material and workmanship. The DFC 5000 Advanced pads are manufactured with post-curing, scorching, and premium shims to support consistent brake performance and NVH control.
