Dynamite Friction 4504-67009 Disc Brake Kit - Front and Rear
Brake Kit for Nissan Altima
This Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for 2007-2013 Nissan Altima front and rear brake service. Part number 4504-67009 combines coated rotors and matched pads in one package for a complete brake replacement.
The DFC GEOSPEC rotor and 5000 Advanced pad line is focused on OE-style fitment, corrosion resistance, and consistent braking behavior. For Nissan Altima brake repair, this kit simplifies parts selection while keeping the rotor and pad pairing matched for the application.
Key Features
- Complete disc brake kit with rotors and pads
- Compatible with 2007-2013 Nissan Altima, front and rear
- GeoSpec coated rotors with a silver-gray finish for added rust resistance
- Rotors ship dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-67009
Product Details
DFC GEOSPEC rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for critical dimensions and balance. The coated surface helps resist corrosion better than conventional paint or zinc finishes, while the dry packaging avoids the need to clean oil from the rotor before installation. The 5000 Advanced brake pads are formulated for stable friction performance and are assembled with NVH-focused shims for smoother operation. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Worn rotors and pads on a 2007-2013 Nissan Altima
- Brake noise from uneven pad wear or rotor surface issues
- Rust buildup on exposed rotor surfaces
- Longer stopping distances caused by worn friction components
- Brake pulsation related to rotor condition
Installation Notes
Fits 2007-2013 Nissan Altima, front and rear. Verify axle position before ordering and compare the existing rotor and pad setup to confirm application details. The rotors are ready to install out of the box, which reduces prep time during brake service. Follow standard brake service procedures, including proper cleaning of hub surfaces and correct pad bedding after installation.
Quality Assurance
Each rotor is inspected for balance and critical dimensions, then checked against OE specifications before release. DFC backs the rotors with a 12-month warranty against defects in material and workmanship. Part number 4504-67009 is built as a matched brake service kit for consistent results on the Nissan Altima platform.
Brake Kit for Nissan Altima
This Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for 2007-2013 Nissan Altima front and rear brake service. Part number 4504-67009 combines coated rotors and matched pads in one package for a complete brake replacement.
The DFC GEOSPEC rotor and 5000 Advanced pad line is focused on OE-style fitment, corrosion resistance, and consistent braking behavior. For Nissan Altima brake repair, this kit simplifies parts selection while keeping the rotor and pad pairing matched for the application.
Key Features
- Complete disc brake kit with rotors and pads
- Compatible with 2007-2013 Nissan Altima, front and rear
- GeoSpec coated rotors with a silver-gray finish for added rust resistance
- Rotors ship dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-67009
Product Details
DFC GEOSPEC rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for critical dimensions and balance. The coated surface helps resist corrosion better than conventional paint or zinc finishes, while the dry packaging avoids the need to clean oil from the rotor before installation. The 5000 Advanced brake pads are formulated for stable friction performance and are assembled with NVH-focused shims for smoother operation. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Worn rotors and pads on a 2007-2013 Nissan Altima
- Brake noise from uneven pad wear or rotor surface issues
- Rust buildup on exposed rotor surfaces
- Longer stopping distances caused by worn friction components
- Brake pulsation related to rotor condition
Installation Notes
Fits 2007-2013 Nissan Altima, front and rear. Verify axle position before ordering and compare the existing rotor and pad setup to confirm application details. The rotors are ready to install out of the box, which reduces prep time during brake service. Follow standard brake service procedures, including proper cleaning of hub surfaces and correct pad bedding after installation.
Quality Assurance
Each rotor is inspected for balance and critical dimensions, then checked against OE specifications before release. DFC backs the rotors with a 12-month warranty against defects in material and workmanship. Part number 4504-67009 is built as a matched brake service kit for consistent results on the Nissan Altima platform.
Original: $306.01
-65%$306.01
$107.10Description
Brake Kit for Nissan Altima
This Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for 2007-2013 Nissan Altima front and rear brake service. Part number 4504-67009 combines coated rotors and matched pads in one package for a complete brake replacement.
The DFC GEOSPEC rotor and 5000 Advanced pad line is focused on OE-style fitment, corrosion resistance, and consistent braking behavior. For Nissan Altima brake repair, this kit simplifies parts selection while keeping the rotor and pad pairing matched for the application.
Key Features
- Complete disc brake kit with rotors and pads
- Compatible with 2007-2013 Nissan Altima, front and rear
- GeoSpec coated rotors with a silver-gray finish for added rust resistance
- Rotors ship dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-67009
Product Details
DFC GEOSPEC rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for critical dimensions and balance. The coated surface helps resist corrosion better than conventional paint or zinc finishes, while the dry packaging avoids the need to clean oil from the rotor before installation. The 5000 Advanced brake pads are formulated for stable friction performance and are assembled with NVH-focused shims for smoother operation. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Worn rotors and pads on a 2007-2013 Nissan Altima
- Brake noise from uneven pad wear or rotor surface issues
- Rust buildup on exposed rotor surfaces
- Longer stopping distances caused by worn friction components
- Brake pulsation related to rotor condition
Installation Notes
Fits 2007-2013 Nissan Altima, front and rear. Verify axle position before ordering and compare the existing rotor and pad setup to confirm application details. The rotors are ready to install out of the box, which reduces prep time during brake service. Follow standard brake service procedures, including proper cleaning of hub surfaces and correct pad bedding after installation.
Quality Assurance
Each rotor is inspected for balance and critical dimensions, then checked against OE specifications before release. DFC backs the rotors with a 12-month warranty against defects in material and workmanship. Part number 4504-67009 is built as a matched brake service kit for consistent results on the Nissan Altima platform.
