Dynamite Friction 4504-67007 Disc Brake Kit - Front and Rear
Brake Kit for Infiniti I30 and Nissan Maxima
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched friction material for front and rear service. It is built for select 1999-2000 Nissan Maxima and 2000 Infiniti I30 applications, including vehicles produced within the listed production-date ranges.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal or extra prep
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and quieter braking
- 5000 Advanced Brake Pads are post-cured and scorched to reduce initial break-in
- Premium rubber-steel-rubber shims help improve noise, vibration, and harshness control
- Part number 4504-67007
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a service kit for drivers replacing worn brake components on the Nissan Maxima and Infiniti I30. The coated rotors resist rust better than conventional painted or zinc-coated finishes, while the pad formulation is prepared for stable friction performance and smoother initial operation. This kit is a practical choice for a 1999 Nissan Maxima, 2000 Nissan Maxima, or 2000 Infiniti I30 with the listed production-date coverage. Part number 4504-67007 is also useful when searching for a front and rear brake kit for these vehicles.
Common Brake Issues This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Reduced stopping performance from depleted pads
- Brake noise related to pad wear or rotor surface condition
- Rust buildup on exposed rotor surfaces
- Longer pedal travel from brake component wear
Installation Notes
Compatible With 2000 Infiniti I30, front and rear, vehicle production date to 9/00. Compatible With 2000 Nissan Maxima, front and rear, vehicle production date to 9/00. Compatible With 1999 Nissan Maxima, front and rear, vehicle production date from 4/99. Verify production date before ordering, and inspect calipers, slides, and brake fluid condition during service. The rotors are shipped dry and ready for installation.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, finished with a non-directional surface, and fully inspected for critical dimensions and balance where applicable. The rotors are backed by a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced Brake Pads are post-cured, scorched, and assembled with premium shims to support consistent brake performance.
Brake Kit for Infiniti I30 and Nissan Maxima
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched friction material for front and rear service. It is built for select 1999-2000 Nissan Maxima and 2000 Infiniti I30 applications, including vehicles produced within the listed production-date ranges.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal or extra prep
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and quieter braking
- 5000 Advanced Brake Pads are post-cured and scorched to reduce initial break-in
- Premium rubber-steel-rubber shims help improve noise, vibration, and harshness control
- Part number 4504-67007
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a service kit for drivers replacing worn brake components on the Nissan Maxima and Infiniti I30. The coated rotors resist rust better than conventional painted or zinc-coated finishes, while the pad formulation is prepared for stable friction performance and smoother initial operation. This kit is a practical choice for a 1999 Nissan Maxima, 2000 Nissan Maxima, or 2000 Infiniti I30 with the listed production-date coverage. Part number 4504-67007 is also useful when searching for a front and rear brake kit for these vehicles.
Common Brake Issues This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Reduced stopping performance from depleted pads
- Brake noise related to pad wear or rotor surface condition
- Rust buildup on exposed rotor surfaces
- Longer pedal travel from brake component wear
Installation Notes
Compatible With 2000 Infiniti I30, front and rear, vehicle production date to 9/00. Compatible With 2000 Nissan Maxima, front and rear, vehicle production date to 9/00. Compatible With 1999 Nissan Maxima, front and rear, vehicle production date from 4/99. Verify production date before ordering, and inspect calipers, slides, and brake fluid condition during service. The rotors are shipped dry and ready for installation.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, finished with a non-directional surface, and fully inspected for critical dimensions and balance where applicable. The rotors are backed by a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced Brake Pads are post-cured, scorched, and assembled with premium shims to support consistent brake performance.
Original: $280.06
-65%$280.06
$98.02Description
Brake Kit for Infiniti I30 and Nissan Maxima
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched friction material for front and rear service. It is built for select 1999-2000 Nissan Maxima and 2000 Infiniti I30 applications, including vehicles produced within the listed production-date ranges.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal or extra prep
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and quieter braking
- 5000 Advanced Brake Pads are post-cured and scorched to reduce initial break-in
- Premium rubber-steel-rubber shims help improve noise, vibration, and harshness control
- Part number 4504-67007
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a service kit for drivers replacing worn brake components on the Nissan Maxima and Infiniti I30. The coated rotors resist rust better than conventional painted or zinc-coated finishes, while the pad formulation is prepared for stable friction performance and smoother initial operation. This kit is a practical choice for a 1999 Nissan Maxima, 2000 Nissan Maxima, or 2000 Infiniti I30 with the listed production-date coverage. Part number 4504-67007 is also useful when searching for a front and rear brake kit for these vehicles.
Common Brake Issues This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Reduced stopping performance from depleted pads
- Brake noise related to pad wear or rotor surface condition
- Rust buildup on exposed rotor surfaces
- Longer pedal travel from brake component wear
Installation Notes
Compatible With 2000 Infiniti I30, front and rear, vehicle production date to 9/00. Compatible With 2000 Nissan Maxima, front and rear, vehicle production date to 9/00. Compatible With 1999 Nissan Maxima, front and rear, vehicle production date from 4/99. Verify production date before ordering, and inspect calipers, slides, and brake fluid condition during service. The rotors are shipped dry and ready for installation.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, finished with a non-directional surface, and fully inspected for critical dimensions and balance where applicable. The rotors are backed by a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced Brake Pads are post-cured, scorched, and assembled with premium shims to support consistent brake performance.
