Dynamite Friction 4504-63064 Disc Brake Kit - Front and Rear
Brake Kit for Mercedes-Benz Front and Rear Service
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched friction material for a complete brake service. Part number 4504-63064 is built for select Mercedes-Benz applications and is listed for front and rear positions.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors ship ready to install, with no oil coating to remove
- Non-directional rotor finish supports even pad bed-in and quieter braking
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Complete disc brake kit for front and rear service
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a service kit for drivers who want rotors and pads matched for the same axle service. The coated rotor surface helps resist rust better than conventional paint or zinc finishes, while the dry-ready design saves prep time during installation. The pads are formulated for consistent friction, with post-curing and scorching used to reduce initial break-in demands and improve stopping response from the first stops. Part number 4504-63064 is a direct-fit brake service solution for select Mercedes-Benz models, including CLK550, SLK55 AMG, C350 with AMG Performance Brakes, C55 AMG, CLK500, and C32 AMG.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise during everyday driving
- Rust buildup on exposed rotor surfaces
- Uneven pad bedding after rotor replacement
- Reduced braking consistency from worn rotors and pads
- Longer service time caused by cleaning oil-coated rotors
Installation Notes
Compatible With 2002-2004 Mercedes-Benz C32 AMG, front and rear; 2003-2006 Mercedes-Benz CLK500, front and rear; 2005-2006 Mercedes-Benz C55 AMG, front and rear; 2006-2007 Mercedes-Benz C350, front and rear, with AMG Performance Brakes and 4-piston front calipers; 2006-2008 Mercedes-Benz SLK55 AMG, front and rear, with disc brake pad wear sensor for 4-piston front calipers; and 2007-2009 Mercedes-Benz CLK550, front and rear. Verify caliper and brake package details before ordering, especially on AMG and performance-brake applications. Part number 4504-63064 should be matched to the vehicle’s brake configuration before installation.
Quality Assurance
Each rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions to meet OE specifications. DFC states a 12-month warranty against defects in material and workmanship for the rotors in this kit.
Brake Kit for Mercedes-Benz Front and Rear Service
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched friction material for a complete brake service. Part number 4504-63064 is built for select Mercedes-Benz applications and is listed for front and rear positions.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors ship ready to install, with no oil coating to remove
- Non-directional rotor finish supports even pad bed-in and quieter braking
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Complete disc brake kit for front and rear service
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a service kit for drivers who want rotors and pads matched for the same axle service. The coated rotor surface helps resist rust better than conventional paint or zinc finishes, while the dry-ready design saves prep time during installation. The pads are formulated for consistent friction, with post-curing and scorching used to reduce initial break-in demands and improve stopping response from the first stops. Part number 4504-63064 is a direct-fit brake service solution for select Mercedes-Benz models, including CLK550, SLK55 AMG, C350 with AMG Performance Brakes, C55 AMG, CLK500, and C32 AMG.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise during everyday driving
- Rust buildup on exposed rotor surfaces
- Uneven pad bedding after rotor replacement
- Reduced braking consistency from worn rotors and pads
- Longer service time caused by cleaning oil-coated rotors
Installation Notes
Compatible With 2002-2004 Mercedes-Benz C32 AMG, front and rear; 2003-2006 Mercedes-Benz CLK500, front and rear; 2005-2006 Mercedes-Benz C55 AMG, front and rear; 2006-2007 Mercedes-Benz C350, front and rear, with AMG Performance Brakes and 4-piston front calipers; 2006-2008 Mercedes-Benz SLK55 AMG, front and rear, with disc brake pad wear sensor for 4-piston front calipers; and 2007-2009 Mercedes-Benz CLK550, front and rear. Verify caliper and brake package details before ordering, especially on AMG and performance-brake applications. Part number 4504-63064 should be matched to the vehicle’s brake configuration before installation.
Quality Assurance
Each rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions to meet OE specifications. DFC states a 12-month warranty against defects in material and workmanship for the rotors in this kit.
Original: $447.01
-65%$447.01
$156.45Description
Brake Kit for Mercedes-Benz Front and Rear Service
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched friction material for a complete brake service. Part number 4504-63064 is built for select Mercedes-Benz applications and is listed for front and rear positions.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors ship ready to install, with no oil coating to remove
- Non-directional rotor finish supports even pad bed-in and quieter braking
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Complete disc brake kit for front and rear service
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a service kit for drivers who want rotors and pads matched for the same axle service. The coated rotor surface helps resist rust better than conventional paint or zinc finishes, while the dry-ready design saves prep time during installation. The pads are formulated for consistent friction, with post-curing and scorching used to reduce initial break-in demands and improve stopping response from the first stops. Part number 4504-63064 is a direct-fit brake service solution for select Mercedes-Benz models, including CLK550, SLK55 AMG, C350 with AMG Performance Brakes, C55 AMG, CLK500, and C32 AMG.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise during everyday driving
- Rust buildup on exposed rotor surfaces
- Uneven pad bedding after rotor replacement
- Reduced braking consistency from worn rotors and pads
- Longer service time caused by cleaning oil-coated rotors
Installation Notes
Compatible With 2002-2004 Mercedes-Benz C32 AMG, front and rear; 2003-2006 Mercedes-Benz CLK500, front and rear; 2005-2006 Mercedes-Benz C55 AMG, front and rear; 2006-2007 Mercedes-Benz C350, front and rear, with AMG Performance Brakes and 4-piston front calipers; 2006-2008 Mercedes-Benz SLK55 AMG, front and rear, with disc brake pad wear sensor for 4-piston front calipers; and 2007-2009 Mercedes-Benz CLK550, front and rear. Verify caliper and brake package details before ordering, especially on AMG and performance-brake applications. Part number 4504-63064 should be matched to the vehicle’s brake configuration before installation.
Quality Assurance
Each rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions to meet OE specifications. DFC states a 12-month warranty against defects in material and workmanship for the rotors in this kit.
