Dynamite Friction 4504-63052 Disc Brake Kit - Front and Rear
Brake Kit for Mercedes-Benz E-Class and C-Class
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched pads for front and rear service. Part number 4504-63052 is built for select Mercedes-Benz E400, E350, E300, C350, and C300 applications with the fitment notes listed below.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched to reduce initial break-in
- Premium rubber-steel-rubber shims are used to improve noise, vibration, and harshness control
- Part number 4504-63052 for ordering and fitment verification
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched brake service solution for Mercedes-Benz models that require OE-style braking performance and corrosion protection. The rotor castings use a G3000/G11H18 specification, are machined to tight tolerances, and receive a non-directional finish for consistent contact with the pad surface. The pads are formulated for stable friction performance and are assembled with shims to help reduce brake noise and vibration. This part number 4504-63052 is a direct service option for drivers maintaining Mercedes-Benz E400, E350, E300, C350, and C300 brake systems.
Fitment
- Fits 2017 Mercedes-Benz E400, front and rear.
- Fits 2015-2016 Mercedes-Benz E400, front and rear; fits vehicles without Sport Package.
- Fits 2012-2015 Mercedes-Benz C350, front and rear; fits vehicles without Sport Package.
- Fits 2013-2014 Mercedes-Benz C300, front and rear; exc Sport Package.
- Fits 2012-2014 Mercedes-Benz C350, front and rear.
- Fits 2010-2014 Mercedes-Benz E350, front and rear; fits vehicles without Sport Package.
- Fits 2010 Mercedes-Benz E300, front and rear; front rotors.
- Fits 2010 Mercedes-Benz E300, front and rear; Mexico; standard front rotors.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pads
- Brake noise caused by pad wear or shim deterioration
- Rust buildup on exposed rotor surfaces
- Longer service time from cleaning oil-coated replacement rotors
Installation Notes and Tips
Verify the vehicle trim and package details before ordering, especially Sport Package exclusions noted in the fitment list. The rotors are shipped dry and ready to install, which helps reduce prep time during brake service. For best results, follow proper brake bedding procedures after installation and inspect calipers, slides, and brake fluid condition during the job.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance where applicable, with machining performed to OE-level specifications. The rotors include a 12-month warranty against defects in material and workmanship.
Brake Kit for Mercedes-Benz E-Class and C-Class
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched pads for front and rear service. Part number 4504-63052 is built for select Mercedes-Benz E400, E350, E300, C350, and C300 applications with the fitment notes listed below.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched to reduce initial break-in
- Premium rubber-steel-rubber shims are used to improve noise, vibration, and harshness control
- Part number 4504-63052 for ordering and fitment verification
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched brake service solution for Mercedes-Benz models that require OE-style braking performance and corrosion protection. The rotor castings use a G3000/G11H18 specification, are machined to tight tolerances, and receive a non-directional finish for consistent contact with the pad surface. The pads are formulated for stable friction performance and are assembled with shims to help reduce brake noise and vibration. This part number 4504-63052 is a direct service option for drivers maintaining Mercedes-Benz E400, E350, E300, C350, and C300 brake systems.
Fitment
- Fits 2017 Mercedes-Benz E400, front and rear.
- Fits 2015-2016 Mercedes-Benz E400, front and rear; fits vehicles without Sport Package.
- Fits 2012-2015 Mercedes-Benz C350, front and rear; fits vehicles without Sport Package.
- Fits 2013-2014 Mercedes-Benz C300, front and rear; exc Sport Package.
- Fits 2012-2014 Mercedes-Benz C350, front and rear.
- Fits 2010-2014 Mercedes-Benz E350, front and rear; fits vehicles without Sport Package.
- Fits 2010 Mercedes-Benz E300, front and rear; front rotors.
- Fits 2010 Mercedes-Benz E300, front and rear; Mexico; standard front rotors.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pads
- Brake noise caused by pad wear or shim deterioration
- Rust buildup on exposed rotor surfaces
- Longer service time from cleaning oil-coated replacement rotors
Installation Notes and Tips
Verify the vehicle trim and package details before ordering, especially Sport Package exclusions noted in the fitment list. The rotors are shipped dry and ready to install, which helps reduce prep time during brake service. For best results, follow proper brake bedding procedures after installation and inspect calipers, slides, and brake fluid condition during the job.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance where applicable, with machining performed to OE-level specifications. The rotors include a 12-month warranty against defects in material and workmanship.
Original: $457.27
-65%$457.27
$160.04Description
Brake Kit for Mercedes-Benz E-Class and C-Class
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched pads for front and rear service. Part number 4504-63052 is built for select Mercedes-Benz E400, E350, E300, C350, and C300 applications with the fitment notes listed below.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched to reduce initial break-in
- Premium rubber-steel-rubber shims are used to improve noise, vibration, and harshness control
- Part number 4504-63052 for ordering and fitment verification
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched brake service solution for Mercedes-Benz models that require OE-style braking performance and corrosion protection. The rotor castings use a G3000/G11H18 specification, are machined to tight tolerances, and receive a non-directional finish for consistent contact with the pad surface. The pads are formulated for stable friction performance and are assembled with shims to help reduce brake noise and vibration. This part number 4504-63052 is a direct service option for drivers maintaining Mercedes-Benz E400, E350, E300, C350, and C300 brake systems.
Fitment
- Fits 2017 Mercedes-Benz E400, front and rear.
- Fits 2015-2016 Mercedes-Benz E400, front and rear; fits vehicles without Sport Package.
- Fits 2012-2015 Mercedes-Benz C350, front and rear; fits vehicles without Sport Package.
- Fits 2013-2014 Mercedes-Benz C300, front and rear; exc Sport Package.
- Fits 2012-2014 Mercedes-Benz C350, front and rear.
- Fits 2010-2014 Mercedes-Benz E350, front and rear; fits vehicles without Sport Package.
- Fits 2010 Mercedes-Benz E300, front and rear; front rotors.
- Fits 2010 Mercedes-Benz E300, front and rear; Mexico; standard front rotors.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pads
- Brake noise caused by pad wear or shim deterioration
- Rust buildup on exposed rotor surfaces
- Longer service time from cleaning oil-coated replacement rotors
Installation Notes and Tips
Verify the vehicle trim and package details before ordering, especially Sport Package exclusions noted in the fitment list. The rotors are shipped dry and ready to install, which helps reduce prep time during brake service. For best results, follow proper brake bedding procedures after installation and inspect calipers, slides, and brake fluid condition during the job.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance where applicable, with machining performed to OE-level specifications. The rotors include a 12-month warranty against defects in material and workmanship.
