Dynamite Friction 4504-63019 Disc Brake Kit - Front and Rear
Brake Kit for Mercedes-Benz Service Replacement
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched pads for front and rear brake service. It is built for Mercedes-Benz applications including C230, C280, E300, and SLK230 models, with fitment coverage across 1996-2004 vehicles.
Key Features
- Complete disc brake kit with rotors and 5000 Advanced brake pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and quieter braking
- 100% inspected rotors with balance correction on vented applications
- Post-cured and scorched pads for stable friction performance and reduced break-in time
- Rubber-steel-rubber shims help improve noise, vibration, and harshness control
Product Details
Part number 4504-63019 is part of the DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line, a brake service kit focused on matched friction and rotor performance. The pads are formulated for consistent stopping behavior, while the coated rotors are machined to tight tolerances and finished to support smooth, quiet operation. This kit is a direct service solution for Mercedes-Benz C230, C280, E300, and SLK230 brake maintenance, including front and rear applications listed below.
Fits 2001-2004 Mercedes-Benz SLK230, front and rear. Fits 1999-2000 Mercedes-Benz C230, front and rear, 1-pin rear pads. Fits 1996-2000 Mercedes-Benz C280, front and rear, 1-pin rear pads. Fits 1998-2000 Mercedes-Benz SLK230, front and rear, 1-pin rear pads. Fits 1996-1997 Mercedes-Benz E300, front and rear, 1-pin rear pads.
What This Brake Kit Helps Address
- Brake noise during everyday driving
- Uneven pad bedding after rotor replacement
- Rust buildup on exposed rotor surfaces
- Reduced braking consistency from worn pads and rotors
- Service delays caused by cleaning oil-coated rotors before installation
Installation Notes
Install on the listed Mercedes-Benz applications only and verify the rear pad configuration before ordering, especially on models noted with 1-pin rear pads. The rotors are shipped dry and ready for installation, which reduces prep time during brake service. For proper results, follow standard brake service procedures and bed the pads according to the vehicle manufacturer’s recommendations.
Quality Assurance
DFC processes each rotor to OE specifications and inspects critical dimensions after machining. The brake pads are post-cured, scorched, and assembled with premium shims for consistent performance and improved NVH control. Rotors include a 12-month warranty against defects in material and workmanship. Part number 4504-63019 is engineered for dependable service on Mercedes-Benz brake applications.
Brake Kit for Mercedes-Benz Service Replacement
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched pads for front and rear brake service. It is built for Mercedes-Benz applications including C230, C280, E300, and SLK230 models, with fitment coverage across 1996-2004 vehicles.
Key Features
- Complete disc brake kit with rotors and 5000 Advanced brake pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and quieter braking
- 100% inspected rotors with balance correction on vented applications
- Post-cured and scorched pads for stable friction performance and reduced break-in time
- Rubber-steel-rubber shims help improve noise, vibration, and harshness control
Product Details
Part number 4504-63019 is part of the DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line, a brake service kit focused on matched friction and rotor performance. The pads are formulated for consistent stopping behavior, while the coated rotors are machined to tight tolerances and finished to support smooth, quiet operation. This kit is a direct service solution for Mercedes-Benz C230, C280, E300, and SLK230 brake maintenance, including front and rear applications listed below.
Fits 2001-2004 Mercedes-Benz SLK230, front and rear. Fits 1999-2000 Mercedes-Benz C230, front and rear, 1-pin rear pads. Fits 1996-2000 Mercedes-Benz C280, front and rear, 1-pin rear pads. Fits 1998-2000 Mercedes-Benz SLK230, front and rear, 1-pin rear pads. Fits 1996-1997 Mercedes-Benz E300, front and rear, 1-pin rear pads.
What This Brake Kit Helps Address
- Brake noise during everyday driving
- Uneven pad bedding after rotor replacement
- Rust buildup on exposed rotor surfaces
- Reduced braking consistency from worn pads and rotors
- Service delays caused by cleaning oil-coated rotors before installation
Installation Notes
Install on the listed Mercedes-Benz applications only and verify the rear pad configuration before ordering, especially on models noted with 1-pin rear pads. The rotors are shipped dry and ready for installation, which reduces prep time during brake service. For proper results, follow standard brake service procedures and bed the pads according to the vehicle manufacturer’s recommendations.
Quality Assurance
DFC processes each rotor to OE specifications and inspects critical dimensions after machining. The brake pads are post-cured, scorched, and assembled with premium shims for consistent performance and improved NVH control. Rotors include a 12-month warranty against defects in material and workmanship. Part number 4504-63019 is engineered for dependable service on Mercedes-Benz brake applications.
Original: $285.84
-65%$285.84
$100.04Description
Brake Kit for Mercedes-Benz Service Replacement
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched pads for front and rear brake service. It is built for Mercedes-Benz applications including C230, C280, E300, and SLK230 models, with fitment coverage across 1996-2004 vehicles.
Key Features
- Complete disc brake kit with rotors and 5000 Advanced brake pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and quieter braking
- 100% inspected rotors with balance correction on vented applications
- Post-cured and scorched pads for stable friction performance and reduced break-in time
- Rubber-steel-rubber shims help improve noise, vibration, and harshness control
Product Details
Part number 4504-63019 is part of the DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line, a brake service kit focused on matched friction and rotor performance. The pads are formulated for consistent stopping behavior, while the coated rotors are machined to tight tolerances and finished to support smooth, quiet operation. This kit is a direct service solution for Mercedes-Benz C230, C280, E300, and SLK230 brake maintenance, including front and rear applications listed below.
Fits 2001-2004 Mercedes-Benz SLK230, front and rear. Fits 1999-2000 Mercedes-Benz C230, front and rear, 1-pin rear pads. Fits 1996-2000 Mercedes-Benz C280, front and rear, 1-pin rear pads. Fits 1998-2000 Mercedes-Benz SLK230, front and rear, 1-pin rear pads. Fits 1996-1997 Mercedes-Benz E300, front and rear, 1-pin rear pads.
What This Brake Kit Helps Address
- Brake noise during everyday driving
- Uneven pad bedding after rotor replacement
- Rust buildup on exposed rotor surfaces
- Reduced braking consistency from worn pads and rotors
- Service delays caused by cleaning oil-coated rotors before installation
Installation Notes
Install on the listed Mercedes-Benz applications only and verify the rear pad configuration before ordering, especially on models noted with 1-pin rear pads. The rotors are shipped dry and ready for installation, which reduces prep time during brake service. For proper results, follow standard brake service procedures and bed the pads according to the vehicle manufacturer’s recommendations.
Quality Assurance
DFC processes each rotor to OE specifications and inspects critical dimensions after machining. The brake pads are post-cured, scorched, and assembled with premium shims for consistent performance and improved NVH control. Rotors include a 12-month warranty against defects in material and workmanship. Part number 4504-63019 is engineered for dependable service on Mercedes-Benz brake applications.
