Dynamite Friction 4504-63018 Disc Brake Kit - Front and Rear
Brake Kit for Mercedes-Benz Front and Rear Service
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for Mercedes-Benz service applications that need rotors and pads in one package. Part number 4504-63018 combines coated GEOSPEC rotors with matched 5000 Advanced pads for a complete front and rear brake service.
Compatible With 1996-2000 Mercedes-Benz C280, 1996-1997 Mercedes-Benz E300, 1998-2000 Mercedes-Benz SLK230, and 1999-2000 Mercedes-Benz C230 applications, this kit is aimed at drivers replacing worn brake components on these platforms.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Rotors are shipped dry and ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- 100% inspected rotors with balance correction on vented designs
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a service kit for front and rear brake replacement. The rotors use a protective coating that helps resist rust better than conventional paint or zinc finishes, while the dry packaging eliminates the need to clean oil from the rotor before installation. The pads are formulated for consistent friction, with post-curing and scorching steps that reduce initial break-in demands and support predictable stopping performance. Part number 4504-63018 is a practical choice for Mercedes-Benz C230, C280, SLK230, and E300 brake service when a complete rotor-and-pad package is needed.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by aged pads or rotor surface wear
- Reduced stopping performance from thin or heat-affected components
- Rust buildup on exposed rotor surfaces
- Extended service time when sourcing rotors and pads separately
Installation Notes and Tips
Before installation, confirm axle position and rear caliper configuration for your vehicle. This kit is listed for front and rear service on the specified Mercedes-Benz applications, including 2-pin rear pad notes where shown in fitment data. Clean the hub mounting surface, inspect calipers and hardware condition, and follow the vehicle manufacturer’s torque and bedding procedures after installation. Part number 4504-63018 is supplied dry, so no rotor prep cleaning is required before mounting.
Quality Assurance
Each rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance where applicable. DFC states that every rotor is checked against OE specifications, and the rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured, scorched, and assembled with premium shims to support consistent brake feel and NVH control.
Brake Kit for Mercedes-Benz Front and Rear Service
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for Mercedes-Benz service applications that need rotors and pads in one package. Part number 4504-63018 combines coated GEOSPEC rotors with matched 5000 Advanced pads for a complete front and rear brake service.
Compatible With 1996-2000 Mercedes-Benz C280, 1996-1997 Mercedes-Benz E300, 1998-2000 Mercedes-Benz SLK230, and 1999-2000 Mercedes-Benz C230 applications, this kit is aimed at drivers replacing worn brake components on these platforms.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Rotors are shipped dry and ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- 100% inspected rotors with balance correction on vented designs
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a service kit for front and rear brake replacement. The rotors use a protective coating that helps resist rust better than conventional paint or zinc finishes, while the dry packaging eliminates the need to clean oil from the rotor before installation. The pads are formulated for consistent friction, with post-curing and scorching steps that reduce initial break-in demands and support predictable stopping performance. Part number 4504-63018 is a practical choice for Mercedes-Benz C230, C280, SLK230, and E300 brake service when a complete rotor-and-pad package is needed.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by aged pads or rotor surface wear
- Reduced stopping performance from thin or heat-affected components
- Rust buildup on exposed rotor surfaces
- Extended service time when sourcing rotors and pads separately
Installation Notes and Tips
Before installation, confirm axle position and rear caliper configuration for your vehicle. This kit is listed for front and rear service on the specified Mercedes-Benz applications, including 2-pin rear pad notes where shown in fitment data. Clean the hub mounting surface, inspect calipers and hardware condition, and follow the vehicle manufacturer’s torque and bedding procedures after installation. Part number 4504-63018 is supplied dry, so no rotor prep cleaning is required before mounting.
Quality Assurance
Each rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance where applicable. DFC states that every rotor is checked against OE specifications, and the rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured, scorched, and assembled with premium shims to support consistent brake feel and NVH control.
Original: $281.44
-65%$281.44
$98.50Description
Brake Kit for Mercedes-Benz Front and Rear Service
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for Mercedes-Benz service applications that need rotors and pads in one package. Part number 4504-63018 combines coated GEOSPEC rotors with matched 5000 Advanced pads for a complete front and rear brake service.
Compatible With 1996-2000 Mercedes-Benz C280, 1996-1997 Mercedes-Benz E300, 1998-2000 Mercedes-Benz SLK230, and 1999-2000 Mercedes-Benz C230 applications, this kit is aimed at drivers replacing worn brake components on these platforms.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Rotors are shipped dry and ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- 100% inspected rotors with balance correction on vented designs
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a service kit for front and rear brake replacement. The rotors use a protective coating that helps resist rust better than conventional paint or zinc finishes, while the dry packaging eliminates the need to clean oil from the rotor before installation. The pads are formulated for consistent friction, with post-curing and scorching steps that reduce initial break-in demands and support predictable stopping performance. Part number 4504-63018 is a practical choice for Mercedes-Benz C230, C280, SLK230, and E300 brake service when a complete rotor-and-pad package is needed.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by aged pads or rotor surface wear
- Reduced stopping performance from thin or heat-affected components
- Rust buildup on exposed rotor surfaces
- Extended service time when sourcing rotors and pads separately
Installation Notes and Tips
Before installation, confirm axle position and rear caliper configuration for your vehicle. This kit is listed for front and rear service on the specified Mercedes-Benz applications, including 2-pin rear pad notes where shown in fitment data. Clean the hub mounting surface, inspect calipers and hardware condition, and follow the vehicle manufacturer’s torque and bedding procedures after installation. Part number 4504-63018 is supplied dry, so no rotor prep cleaning is required before mounting.
Quality Assurance
Each rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance where applicable. DFC states that every rotor is checked against OE specifications, and the rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured, scorched, and assembled with premium shims to support consistent brake feel and NVH control.
