Dynamite Friction 4504-59070 Disc Brake Kit - Front and Rear
Brake Kit for 1997-2001 Honda Prelude
This DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for the front and rear brake service on 1997-2001 Honda Prelude models. Part number 4504-59070 combines coated rotors and matched friction material in one Disc Brake Kit for a straightforward brake refresh.
Key Features
- Fits 1997-2001 Honda Prelude, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-59070 for easy identification
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a complete brake service solution for the Honda Prelude. The rotors are machined to tight tolerances, finished for balanced operation, and inspected to confirm critical dimensions meet OE specifications. The pad compound is formulated for consistent friction, with post-curing and scorching steps that reduce initial break-in demands and support predictable stopping response. For drivers searching for a 1997-2001 Honda Prelude front and rear brake kit, part number 4504-59070 provides the rotor and pad pairing in one package.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by aged pads or inconsistent pad contact
- Reduced stopping performance from worn friction material
- Corrosion on exposed rotor surfaces
- Longer pedal response from brake components at the end of service life
Installation Notes
Before installation, confirm the vehicle is a 1997-2001 Honda Prelude and verify front and rear brake service requirements. The rotors are shipped dry and do not require cleaning of protective oil before installation. Follow standard brake service procedures, inspect related components for wear, and perform a proper pad bed-in after installation to help establish even rotor contact.
Quality Assurance
DFC states that each rotor is inspected for balance where applicable and then checked against critical OE-spec dimensions before release. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4504-59070 is backed by DFC’s brake component manufacturing and inspection process for the 1997-2001 Honda Prelude application.
Brake Kit for 1997-2001 Honda Prelude
This DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for the front and rear brake service on 1997-2001 Honda Prelude models. Part number 4504-59070 combines coated rotors and matched friction material in one Disc Brake Kit for a straightforward brake refresh.
Key Features
- Fits 1997-2001 Honda Prelude, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-59070 for easy identification
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a complete brake service solution for the Honda Prelude. The rotors are machined to tight tolerances, finished for balanced operation, and inspected to confirm critical dimensions meet OE specifications. The pad compound is formulated for consistent friction, with post-curing and scorching steps that reduce initial break-in demands and support predictable stopping response. For drivers searching for a 1997-2001 Honda Prelude front and rear brake kit, part number 4504-59070 provides the rotor and pad pairing in one package.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by aged pads or inconsistent pad contact
- Reduced stopping performance from worn friction material
- Corrosion on exposed rotor surfaces
- Longer pedal response from brake components at the end of service life
Installation Notes
Before installation, confirm the vehicle is a 1997-2001 Honda Prelude and verify front and rear brake service requirements. The rotors are shipped dry and do not require cleaning of protective oil before installation. Follow standard brake service procedures, inspect related components for wear, and perform a proper pad bed-in after installation to help establish even rotor contact.
Quality Assurance
DFC states that each rotor is inspected for balance where applicable and then checked against critical OE-spec dimensions before release. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4504-59070 is backed by DFC’s brake component manufacturing and inspection process for the 1997-2001 Honda Prelude application.
Original: $254.82
-65%$254.82
$89.19Description
Brake Kit for 1997-2001 Honda Prelude
This DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for the front and rear brake service on 1997-2001 Honda Prelude models. Part number 4504-59070 combines coated rotors and matched friction material in one Disc Brake Kit for a straightforward brake refresh.
Key Features
- Fits 1997-2001 Honda Prelude, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-59070 for easy identification
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a complete brake service solution for the Honda Prelude. The rotors are machined to tight tolerances, finished for balanced operation, and inspected to confirm critical dimensions meet OE specifications. The pad compound is formulated for consistent friction, with post-curing and scorching steps that reduce initial break-in demands and support predictable stopping response. For drivers searching for a 1997-2001 Honda Prelude front and rear brake kit, part number 4504-59070 provides the rotor and pad pairing in one package.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by aged pads or inconsistent pad contact
- Reduced stopping performance from worn friction material
- Corrosion on exposed rotor surfaces
- Longer pedal response from brake components at the end of service life
Installation Notes
Before installation, confirm the vehicle is a 1997-2001 Honda Prelude and verify front and rear brake service requirements. The rotors are shipped dry and do not require cleaning of protective oil before installation. Follow standard brake service procedures, inspect related components for wear, and perform a proper pad bed-in after installation to help establish even rotor contact.
Quality Assurance
DFC states that each rotor is inspected for balance where applicable and then checked against critical OE-spec dimensions before release. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4504-59070 is backed by DFC’s brake component manufacturing and inspection process for the 1997-2001 Honda Prelude application.
