Dynamite Friction 4504-59056 Disc Brake Kit - Front and Rear
Brake Kit for Honda Accord
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched pads in one service package for front and rear brake replacement. It is built for 2014-2015 and 2017 Honda Accord applications, giving you a direct-fit brake service solution for the Accord platform.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time during brake service
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and quieter stops
- DFC 5000 Advanced pads are post-cured and scorched for consistent friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-59056 for ordering and catalog lookup
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-59056, is a brake service kit engineered for Honda Accord front and rear brake replacement. The rotor coating is applied to resist rust better than conventional paint or zinc finishes, while the dry shipping and ready-to-install format helps streamline brake work. The pads are processed to stabilize friction performance and reduce the initial break-in period. For drivers servicing a 2014-2015 or 2017 Honda Accord, this kit provides matched components from one source.
The DFC GEOSPEC product line focuses on coated rotors that match OE-style specifications and are machined to tight tolerances. The 5000 Advanced pad line is formulated for consistent friction across axle applications and uses shims to improve pedal feel and reduce brake noise. Part number 4504-59056 is a practical choice for a complete brake refresh on the Accord.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from worn pads
- Brake noise caused by pad wear or poor pad damping
- Visible rotor rust and corrosion on the braking surface
- Extended service time from cleaning oil-coated replacement rotors
Installation Notes
Fits 2014-2015 Honda Accord, front and rear. Fits 2017 Honda Accord, front and rear. Verify rotor size, brake configuration, and axle position before installation. Clean the rotor friction surface only as needed during handling, and follow standard brake bedding procedures after installation to promote even pad transfer and stable braking performance.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the balancing process. Finished rotors are checked against OE specifications, and the kit includes a 12-month warranty against defects in material and workmanship. Part number 4504-59056 is built for dependable service on Honda Accord brake maintenance.
Brake Kit for Honda Accord
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched pads in one service package for front and rear brake replacement. It is built for 2014-2015 and 2017 Honda Accord applications, giving you a direct-fit brake service solution for the Accord platform.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time during brake service
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and quieter stops
- DFC 5000 Advanced pads are post-cured and scorched for consistent friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-59056 for ordering and catalog lookup
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-59056, is a brake service kit engineered for Honda Accord front and rear brake replacement. The rotor coating is applied to resist rust better than conventional paint or zinc finishes, while the dry shipping and ready-to-install format helps streamline brake work. The pads are processed to stabilize friction performance and reduce the initial break-in period. For drivers servicing a 2014-2015 or 2017 Honda Accord, this kit provides matched components from one source.
The DFC GEOSPEC product line focuses on coated rotors that match OE-style specifications and are machined to tight tolerances. The 5000 Advanced pad line is formulated for consistent friction across axle applications and uses shims to improve pedal feel and reduce brake noise. Part number 4504-59056 is a practical choice for a complete brake refresh on the Accord.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from worn pads
- Brake noise caused by pad wear or poor pad damping
- Visible rotor rust and corrosion on the braking surface
- Extended service time from cleaning oil-coated replacement rotors
Installation Notes
Fits 2014-2015 Honda Accord, front and rear. Fits 2017 Honda Accord, front and rear. Verify rotor size, brake configuration, and axle position before installation. Clean the rotor friction surface only as needed during handling, and follow standard brake bedding procedures after installation to promote even pad transfer and stable braking performance.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the balancing process. Finished rotors are checked against OE specifications, and the kit includes a 12-month warranty against defects in material and workmanship. Part number 4504-59056 is built for dependable service on Honda Accord brake maintenance.
Description
Brake Kit for Honda Accord
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched pads in one service package for front and rear brake replacement. It is built for 2014-2015 and 2017 Honda Accord applications, giving you a direct-fit brake service solution for the Accord platform.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time during brake service
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and quieter stops
- DFC 5000 Advanced pads are post-cured and scorched for consistent friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-59056 for ordering and catalog lookup
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-59056, is a brake service kit engineered for Honda Accord front and rear brake replacement. The rotor coating is applied to resist rust better than conventional paint or zinc finishes, while the dry shipping and ready-to-install format helps streamline brake work. The pads are processed to stabilize friction performance and reduce the initial break-in period. For drivers servicing a 2014-2015 or 2017 Honda Accord, this kit provides matched components from one source.
The DFC GEOSPEC product line focuses on coated rotors that match OE-style specifications and are machined to tight tolerances. The 5000 Advanced pad line is formulated for consistent friction across axle applications and uses shims to improve pedal feel and reduce brake noise. Part number 4504-59056 is a practical choice for a complete brake refresh on the Accord.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from worn pads
- Brake noise caused by pad wear or poor pad damping
- Visible rotor rust and corrosion on the braking surface
- Extended service time from cleaning oil-coated replacement rotors
Installation Notes
Fits 2014-2015 Honda Accord, front and rear. Fits 2017 Honda Accord, front and rear. Verify rotor size, brake configuration, and axle position before installation. Clean the rotor friction surface only as needed during handling, and follow standard brake bedding procedures after installation to promote even pad transfer and stable braking performance.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the balancing process. Finished rotors are checked against OE specifications, and the kit includes a 12-month warranty against defects in material and workmanship. Part number 4504-59056 is built for dependable service on Honda Accord brake maintenance.
