Dynamite Friction 4504-59020 Disc Brake Kit - Front and Rear
Brake Kit for 2016 Honda CR-Z
This DFC brake kit combines GEOSPEC coated rotors with 5000 Advanced brake pads for the front and rear of the 2016 Honda CR-Z. It is built for drivers who want an OE-style disc brake kit with corrosion-resistant rotors and stable pad performance in one package.
Key Features
- Part number 4504-59020 disc brake kit for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed rotors ship ready to install, with no oil coating to clean off
- G3000/G11H18 cast iron rotor construction matched to OEM specifications
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 100% inspected rotors, including balance checks on vented rotors
- DFC 5000 Advanced pads are post-cured, scorched, and fitted with premium rubber-steel-rubber shims for NVH control
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a complete brake service solution for the 2016 Honda CR-Z. The rotors are machined to tight tolerances, finished for consistent contact, and inspected to confirm critical dimensions meet OE specifications. The pads are processed to reduce initial break-in and deliver stable friction performance from the first stop. Part number 4504-59020 is a practical choice when replacing worn brake components on a Honda CR-Z front and rear brake service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise and vibration during braking
- Reduced stopping performance from worn pads
- Longer service time caused by cleaning oil-coated rotors
Installation Notes
Compatible With 2016 Honda CR-Z, front and rear. The rotors are shipped dry and ready for installation, which helps reduce prep time during brake service. Clean the hub surface before installation, follow proper torque procedures, and bed in the pads according to standard brake service practices for consistent results.
Quality Assurance
Each rotor goes through machining, balance verification on vented designs, and final inspection for critical OE-spec attributes. DFC 5000 Advanced pads are post-cured and scorched for stable friction characteristics, and the rotor set includes a 12-month warranty against defects in material and workmanship. Part number 4504-59020 is backed by these inspection and manufacturing controls for the 2016 Honda CR-Z brake service.
Brake Kit for 2016 Honda CR-Z
This DFC brake kit combines GEOSPEC coated rotors with 5000 Advanced brake pads for the front and rear of the 2016 Honda CR-Z. It is built for drivers who want an OE-style disc brake kit with corrosion-resistant rotors and stable pad performance in one package.
Key Features
- Part number 4504-59020 disc brake kit for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed rotors ship ready to install, with no oil coating to clean off
- G3000/G11H18 cast iron rotor construction matched to OEM specifications
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 100% inspected rotors, including balance checks on vented rotors
- DFC 5000 Advanced pads are post-cured, scorched, and fitted with premium rubber-steel-rubber shims for NVH control
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a complete brake service solution for the 2016 Honda CR-Z. The rotors are machined to tight tolerances, finished for consistent contact, and inspected to confirm critical dimensions meet OE specifications. The pads are processed to reduce initial break-in and deliver stable friction performance from the first stop. Part number 4504-59020 is a practical choice when replacing worn brake components on a Honda CR-Z front and rear brake service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise and vibration during braking
- Reduced stopping performance from worn pads
- Longer service time caused by cleaning oil-coated rotors
Installation Notes
Compatible With 2016 Honda CR-Z, front and rear. The rotors are shipped dry and ready for installation, which helps reduce prep time during brake service. Clean the hub surface before installation, follow proper torque procedures, and bed in the pads according to standard brake service practices for consistent results.
Quality Assurance
Each rotor goes through machining, balance verification on vented designs, and final inspection for critical OE-spec attributes. DFC 5000 Advanced pads are post-cured and scorched for stable friction characteristics, and the rotor set includes a 12-month warranty against defects in material and workmanship. Part number 4504-59020 is backed by these inspection and manufacturing controls for the 2016 Honda CR-Z brake service.
Original: $286.51
-65%$286.51
$100.28Description
Brake Kit for 2016 Honda CR-Z
This DFC brake kit combines GEOSPEC coated rotors with 5000 Advanced brake pads for the front and rear of the 2016 Honda CR-Z. It is built for drivers who want an OE-style disc brake kit with corrosion-resistant rotors and stable pad performance in one package.
Key Features
- Part number 4504-59020 disc brake kit for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed rotors ship ready to install, with no oil coating to clean off
- G3000/G11H18 cast iron rotor construction matched to OEM specifications
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 100% inspected rotors, including balance checks on vented rotors
- DFC 5000 Advanced pads are post-cured, scorched, and fitted with premium rubber-steel-rubber shims for NVH control
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a complete brake service solution for the 2016 Honda CR-Z. The rotors are machined to tight tolerances, finished for consistent contact, and inspected to confirm critical dimensions meet OE specifications. The pads are processed to reduce initial break-in and deliver stable friction performance from the first stop. Part number 4504-59020 is a practical choice when replacing worn brake components on a Honda CR-Z front and rear brake service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise and vibration during braking
- Reduced stopping performance from worn pads
- Longer service time caused by cleaning oil-coated rotors
Installation Notes
Compatible With 2016 Honda CR-Z, front and rear. The rotors are shipped dry and ready for installation, which helps reduce prep time during brake service. Clean the hub surface before installation, follow proper torque procedures, and bed in the pads according to standard brake service practices for consistent results.
Quality Assurance
Each rotor goes through machining, balance verification on vented designs, and final inspection for critical OE-spec attributes. DFC 5000 Advanced pads are post-cured and scorched for stable friction characteristics, and the rotor set includes a 12-month warranty against defects in material and workmanship. Part number 4504-59020 is backed by these inspection and manufacturing controls for the 2016 Honda CR-Z brake service.
