Dynamite Friction 4504-59019 Disc Brake Kit - Front and Rear
Brake Kit for 2013-2017 Honda Accord
Restore braking performance on your 2013-2017 Honda Accord with the Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit, part number 4504-59019. This front and rear disc brake kit combines coated rotors and matched friction material for a complete service solution in one package.
Key Features
- Fits 2013-2017 Honda Accord, front and rear
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and quieter stops
- DFC 5000 Advanced brake pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-59019 for easy ordering and catalog matching
Product Details
The DFC GEOSPEC rotor line is built for drivers who want a direct replacement brake service with added corrosion protection. Each rotor is machined to tight tolerances, finished for smoother pad contact, and inspected for balance and critical dimensions before release. The 5000 Advanced brake pads are formulated for consistent friction across a wide range of driving conditions and are prepared to reduce initial break-in time.
For Honda Accord brake replacement jobs, this kit provides the rotors and pads needed for a complete front and rear service. The part number 4504-59019 is a practical match for shoppers searching for a 2013-2017 Honda Accord brake kit, Honda Accord front and rear rotors and pads, or a coated disc brake kit for OE-style maintenance.
Common Problems This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Noise from pads that have reached the end of service life
- Reduced stopping consistency from heat-worn friction material
- Surface rust on exposed rotor hats and vanes
- Longer service time caused by rotors that require cleaning before installation
Installation Notes
Compatible With 2013-2017 Honda Accord, front and rear brake service. The rotors are shipped dry and ready for installation, which helps reduce prep time during a standard brake job. Follow vehicle-specific service procedures, inspect calipers and related wear items during replacement, and bed in the new pads according to the friction material manufacturer’s instructions.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical dimensions, and covered by a 12-month warranty against defects in material and workmanship. The DFC 5000 Advanced pads are post-cured, scorched, and assembled with premium shims to support stable braking performance and improved NVH control. Part number 4504-59019 is built as a complete brake service kit for the listed Honda Accord applications.
Brake Kit for 2013-2017 Honda Accord
Restore braking performance on your 2013-2017 Honda Accord with the Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit, part number 4504-59019. This front and rear disc brake kit combines coated rotors and matched friction material for a complete service solution in one package.
Key Features
- Fits 2013-2017 Honda Accord, front and rear
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and quieter stops
- DFC 5000 Advanced brake pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-59019 for easy ordering and catalog matching
Product Details
The DFC GEOSPEC rotor line is built for drivers who want a direct replacement brake service with added corrosion protection. Each rotor is machined to tight tolerances, finished for smoother pad contact, and inspected for balance and critical dimensions before release. The 5000 Advanced brake pads are formulated for consistent friction across a wide range of driving conditions and are prepared to reduce initial break-in time.
For Honda Accord brake replacement jobs, this kit provides the rotors and pads needed for a complete front and rear service. The part number 4504-59019 is a practical match for shoppers searching for a 2013-2017 Honda Accord brake kit, Honda Accord front and rear rotors and pads, or a coated disc brake kit for OE-style maintenance.
Common Problems This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Noise from pads that have reached the end of service life
- Reduced stopping consistency from heat-worn friction material
- Surface rust on exposed rotor hats and vanes
- Longer service time caused by rotors that require cleaning before installation
Installation Notes
Compatible With 2013-2017 Honda Accord, front and rear brake service. The rotors are shipped dry and ready for installation, which helps reduce prep time during a standard brake job. Follow vehicle-specific service procedures, inspect calipers and related wear items during replacement, and bed in the new pads according to the friction material manufacturer’s instructions.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical dimensions, and covered by a 12-month warranty against defects in material and workmanship. The DFC 5000 Advanced pads are post-cured, scorched, and assembled with premium shims to support stable braking performance and improved NVH control. Part number 4504-59019 is built as a complete brake service kit for the listed Honda Accord applications.
Original: $277.22
-65%$277.22
$97.03Description
Brake Kit for 2013-2017 Honda Accord
Restore braking performance on your 2013-2017 Honda Accord with the Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit, part number 4504-59019. This front and rear disc brake kit combines coated rotors and matched friction material for a complete service solution in one package.
Key Features
- Fits 2013-2017 Honda Accord, front and rear
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and quieter stops
- DFC 5000 Advanced brake pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Part number 4504-59019 for easy ordering and catalog matching
Product Details
The DFC GEOSPEC rotor line is built for drivers who want a direct replacement brake service with added corrosion protection. Each rotor is machined to tight tolerances, finished for smoother pad contact, and inspected for balance and critical dimensions before release. The 5000 Advanced brake pads are formulated for consistent friction across a wide range of driving conditions and are prepared to reduce initial break-in time.
For Honda Accord brake replacement jobs, this kit provides the rotors and pads needed for a complete front and rear service. The part number 4504-59019 is a practical match for shoppers searching for a 2013-2017 Honda Accord brake kit, Honda Accord front and rear rotors and pads, or a coated disc brake kit for OE-style maintenance.
Common Problems This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Noise from pads that have reached the end of service life
- Reduced stopping consistency from heat-worn friction material
- Surface rust on exposed rotor hats and vanes
- Longer service time caused by rotors that require cleaning before installation
Installation Notes
Compatible With 2013-2017 Honda Accord, front and rear brake service. The rotors are shipped dry and ready for installation, which helps reduce prep time during a standard brake job. Follow vehicle-specific service procedures, inspect calipers and related wear items during replacement, and bed in the new pads according to the friction material manufacturer’s instructions.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical dimensions, and covered by a 12-month warranty against defects in material and workmanship. The DFC 5000 Advanced pads are post-cured, scorched, and assembled with premium shims to support stable braking performance and improved NVH control. Part number 4504-59019 is built as a complete brake service kit for the listed Honda Accord applications.
