Dynamite Friction 4504-59011 Disc Brake Kit - Front and Rear
Brake Kit for Acura Integra and Honda Civic
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated replacement rotors with matched friction material for a complete front and rear brake service. Part number 4504-59011 is built for drivers servicing 1993-2001 Honda and Acura applications that need OE-style fitment and consistent stopping performance.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Processed dry and ready to install without rotor cleaning or prep
- G3000/G11H18 cast iron specification for OE-style durability and stability
- Non-directional rotor finish for faster pad bed-in and smoother braking
- 100% inspected rotors, including balance correction on vented rotors
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
Product Line Details
DFC GEOSPEC Rotors are designed with a protective coating that helps resist rust better than conventional paint or zinc finishes. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected to meet OE specifications. The 5000 Advanced Brake Pads are formulated for stable friction performance and assembled with shims that support quieter operation.
Detailed Description
This brake service kit is a direct-fit solution for front and rear brake replacement on 1994-2001 Acura Integra and 1993-1995 Honda Civic models. The combination of coated rotors and advanced pads is suited for routine brake maintenance where consistent pedal feel, even wear, and reduced noise are priorities. Part number 4504-59011 is a practical choice for Acura Integra brake kit and Honda Civic brake kit searches when you need a complete rotor-and-pad package in one order.
What It Helps Address
- Brake noise during everyday driving
- Rust buildup on exposed rotor surfaces
- Uneven pad bedding after rotor replacement
- Longer service time caused by oil-coated rotors
- Reduced braking consistency from worn rotors and pads
Installation Notes and Tips
Compatible With 1994-2001 Acura Integra, front and rear, and 1993-1995 Honda Civic, front and rear. The rotors are shipped dry and ready to install, which can reduce prep time during brake service. For best results, follow standard brake service procedures, verify axle position before installation, and complete a proper pad bed-in after the repair. Part number 4504-59011 should be matched to the vehicle’s exact year and brake configuration before ordering.
Quality Assurance
Each rotor is machined, balanced where required, and inspected for critical dimensions to meet OE specifications. DFC includes a 12-month warranty against defects in material and workmanship on the rotors.
Brake Kit for Acura Integra and Honda Civic
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated replacement rotors with matched friction material for a complete front and rear brake service. Part number 4504-59011 is built for drivers servicing 1993-2001 Honda and Acura applications that need OE-style fitment and consistent stopping performance.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Processed dry and ready to install without rotor cleaning or prep
- G3000/G11H18 cast iron specification for OE-style durability and stability
- Non-directional rotor finish for faster pad bed-in and smoother braking
- 100% inspected rotors, including balance correction on vented rotors
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
Product Line Details
DFC GEOSPEC Rotors are designed with a protective coating that helps resist rust better than conventional paint or zinc finishes. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected to meet OE specifications. The 5000 Advanced Brake Pads are formulated for stable friction performance and assembled with shims that support quieter operation.
Detailed Description
This brake service kit is a direct-fit solution for front and rear brake replacement on 1994-2001 Acura Integra and 1993-1995 Honda Civic models. The combination of coated rotors and advanced pads is suited for routine brake maintenance where consistent pedal feel, even wear, and reduced noise are priorities. Part number 4504-59011 is a practical choice for Acura Integra brake kit and Honda Civic brake kit searches when you need a complete rotor-and-pad package in one order.
What It Helps Address
- Brake noise during everyday driving
- Rust buildup on exposed rotor surfaces
- Uneven pad bedding after rotor replacement
- Longer service time caused by oil-coated rotors
- Reduced braking consistency from worn rotors and pads
Installation Notes and Tips
Compatible With 1994-2001 Acura Integra, front and rear, and 1993-1995 Honda Civic, front and rear. The rotors are shipped dry and ready to install, which can reduce prep time during brake service. For best results, follow standard brake service procedures, verify axle position before installation, and complete a proper pad bed-in after the repair. Part number 4504-59011 should be matched to the vehicle’s exact year and brake configuration before ordering.
Quality Assurance
Each rotor is machined, balanced where required, and inspected for critical dimensions to meet OE specifications. DFC includes a 12-month warranty against defects in material and workmanship on the rotors.
Description
Brake Kit for Acura Integra and Honda Civic
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated replacement rotors with matched friction material for a complete front and rear brake service. Part number 4504-59011 is built for drivers servicing 1993-2001 Honda and Acura applications that need OE-style fitment and consistent stopping performance.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Processed dry and ready to install without rotor cleaning or prep
- G3000/G11H18 cast iron specification for OE-style durability and stability
- Non-directional rotor finish for faster pad bed-in and smoother braking
- 100% inspected rotors, including balance correction on vented rotors
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
Product Line Details
DFC GEOSPEC Rotors are designed with a protective coating that helps resist rust better than conventional paint or zinc finishes. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected to meet OE specifications. The 5000 Advanced Brake Pads are formulated for stable friction performance and assembled with shims that support quieter operation.
Detailed Description
This brake service kit is a direct-fit solution for front and rear brake replacement on 1994-2001 Acura Integra and 1993-1995 Honda Civic models. The combination of coated rotors and advanced pads is suited for routine brake maintenance where consistent pedal feel, even wear, and reduced noise are priorities. Part number 4504-59011 is a practical choice for Acura Integra brake kit and Honda Civic brake kit searches when you need a complete rotor-and-pad package in one order.
What It Helps Address
- Brake noise during everyday driving
- Rust buildup on exposed rotor surfaces
- Uneven pad bedding after rotor replacement
- Longer service time caused by oil-coated rotors
- Reduced braking consistency from worn rotors and pads
Installation Notes and Tips
Compatible With 1994-2001 Acura Integra, front and rear, and 1993-1995 Honda Civic, front and rear. The rotors are shipped dry and ready to install, which can reduce prep time during brake service. For best results, follow standard brake service procedures, verify axle position before installation, and complete a proper pad bed-in after the repair. Part number 4504-59011 should be matched to the vehicle’s exact year and brake configuration before ordering.
Quality Assurance
Each rotor is machined, balanced where required, and inspected for critical dimensions to meet OE specifications. DFC includes a 12-month warranty against defects in material and workmanship on the rotors.
