Dynamite Friction 4504-59009 Disc Brake Kit - Front and Rear
Brake Kit for 1998-2002 Honda Accord
This DFC brake kit combines GEOSPEC coated rotors with 5000 Advanced brake pads for the front and rear of the 1998-2002 Honda Accord. It is built for drivers replacing worn brake components with an OE-style disc brake kit that supports consistent stopping performance and cleaner rotor surfaces during service.
Key Features
- Fits 1998-2002 Honda Accord, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- G3000/G11H18 cast iron specification for OE-style durability and stability
- Non-directional rotor finish helps promote even pad bed-in and smoother braking
- 5000 Advanced pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims help improve noise, vibration, and harshness control
- Part number 4504-59009
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built as a complete brake service solution for vehicles that need matched rotors and friction material in one package. For the Honda Accord, this kit pairs coated rotors with advanced pads engineered to work together for stable braking response, quieter operation, and reliable everyday use. The rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required to support OE-level fit and finish. The pads are formulated for stable friction performance and assembled with shims to help reduce brake noise.
Part number 4504-59009 is a direct service option for 1998-2002 Honda Accord brake maintenance when both rotors and pads need replacement at the same time.
Common Problems This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Reduced stopping performance from depleted pad friction material
- Brake noise related to aged pads or rotor surface condition
- Rust buildup on exposed rotor surfaces
- Extended service time from separate rotor and pad sourcing
Installation Notes and Tips
Install on the front and rear axles of the 1998-2002 Honda Accord only when the vehicle configuration matches the listed application. Clean the hub mounting surfaces before installation, and follow proper brake bedding procedures after service. Because the rotors are shipped dry and ready to install, no additional rotor preparation is required before assembly. Verify pad wear indicators, caliper condition, and brake fluid level during the repair.
Quality Assurance
DFC states that each rotor is inspected after machining to confirm critical dimensions and OE-spec compliance, and every rotor carries a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction characteristics before assembly.
Brake Kit for 1998-2002 Honda Accord
This DFC brake kit combines GEOSPEC coated rotors with 5000 Advanced brake pads for the front and rear of the 1998-2002 Honda Accord. It is built for drivers replacing worn brake components with an OE-style disc brake kit that supports consistent stopping performance and cleaner rotor surfaces during service.
Key Features
- Fits 1998-2002 Honda Accord, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- G3000/G11H18 cast iron specification for OE-style durability and stability
- Non-directional rotor finish helps promote even pad bed-in and smoother braking
- 5000 Advanced pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims help improve noise, vibration, and harshness control
- Part number 4504-59009
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built as a complete brake service solution for vehicles that need matched rotors and friction material in one package. For the Honda Accord, this kit pairs coated rotors with advanced pads engineered to work together for stable braking response, quieter operation, and reliable everyday use. The rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required to support OE-level fit and finish. The pads are formulated for stable friction performance and assembled with shims to help reduce brake noise.
Part number 4504-59009 is a direct service option for 1998-2002 Honda Accord brake maintenance when both rotors and pads need replacement at the same time.
Common Problems This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Reduced stopping performance from depleted pad friction material
- Brake noise related to aged pads or rotor surface condition
- Rust buildup on exposed rotor surfaces
- Extended service time from separate rotor and pad sourcing
Installation Notes and Tips
Install on the front and rear axles of the 1998-2002 Honda Accord only when the vehicle configuration matches the listed application. Clean the hub mounting surfaces before installation, and follow proper brake bedding procedures after service. Because the rotors are shipped dry and ready to install, no additional rotor preparation is required before assembly. Verify pad wear indicators, caliper condition, and brake fluid level during the repair.
Quality Assurance
DFC states that each rotor is inspected after machining to confirm critical dimensions and OE-spec compliance, and every rotor carries a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction characteristics before assembly.
Description
Brake Kit for 1998-2002 Honda Accord
This DFC brake kit combines GEOSPEC coated rotors with 5000 Advanced brake pads for the front and rear of the 1998-2002 Honda Accord. It is built for drivers replacing worn brake components with an OE-style disc brake kit that supports consistent stopping performance and cleaner rotor surfaces during service.
Key Features
- Fits 1998-2002 Honda Accord, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install
- G3000/G11H18 cast iron specification for OE-style durability and stability
- Non-directional rotor finish helps promote even pad bed-in and smoother braking
- 5000 Advanced pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims help improve noise, vibration, and harshness control
- Part number 4504-59009
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built as a complete brake service solution for vehicles that need matched rotors and friction material in one package. For the Honda Accord, this kit pairs coated rotors with advanced pads engineered to work together for stable braking response, quieter operation, and reliable everyday use. The rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required to support OE-level fit and finish. The pads are formulated for stable friction performance and assembled with shims to help reduce brake noise.
Part number 4504-59009 is a direct service option for 1998-2002 Honda Accord brake maintenance when both rotors and pads need replacement at the same time.
Common Problems This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Reduced stopping performance from depleted pad friction material
- Brake noise related to aged pads or rotor surface condition
- Rust buildup on exposed rotor surfaces
- Extended service time from separate rotor and pad sourcing
Installation Notes and Tips
Install on the front and rear axles of the 1998-2002 Honda Accord only when the vehicle configuration matches the listed application. Clean the hub mounting surfaces before installation, and follow proper brake bedding procedures after service. Because the rotors are shipped dry and ready to install, no additional rotor preparation is required before assembly. Verify pad wear indicators, caliper condition, and brake fluid level during the repair.
Quality Assurance
DFC states that each rotor is inspected after machining to confirm critical dimensions and OE-spec compliance, and every rotor carries a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction characteristics before assembly.
