Dynamite Friction 4504-54142 Disc Brake Kit - Front and Rear
Brake Kit for Ford C-Max and Escape
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-54142, is a complete disc brake kit for front and rear service on select Ford applications. It combines coated rotors with matched pads to support consistent braking performance, cleaner installation, and OE-style fitment.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- Compatible With 2013-2017 Ford C-Max, front and rear
- Compatible With 2013-2016 Ford Escape, front and rear
- DFC GEOSPEC rotors feature a silver-gray corrosion-resistant coating
- Rotors are shipped dry and ready to install
- 5000 Advanced pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims are used to improve noise, vibration, and harshness control
- Rotor machining includes a non-directional finish for smoother pad bed-in
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built around matched friction and rotor specifications for everyday driving and service replacement. For Ford C-Max and Ford Escape brake repair, this kit brings together coated cast-iron rotors and advanced pads that are processed for stable friction behavior, quieter operation, and OE-style durability. Part number 4504-54142 is a practical choice when replacing worn brake components on 2013-2017 Ford C-Max or 2013-2016 Ford Escape models.
The rotor coating helps resist rust better than conventional paint or zinc finishes, while the dry-packaged design eliminates the need to clean oil from the rotor before installation. The pads are assembled with NVH-focused shims and prepared to reduce the need for extended bedding. This makes the kit well suited for drivers searching for a Ford C-Max front and rear brake kit or a Ford Escape front and rear disc brake kit with matched components.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from thin or glazed pads
- Brake noise caused by aged friction material or poor pad fit
- Surface rust on exposed rotor hats and vanes
- Longer service time caused by rotors that require cleaning before installation
Installation Notes and Tips
Verify vehicle year, model, and axle position before ordering. This kit is listed for front and rear service on the specified Ford applications, so compare the existing brake setup to the vehicle fitment details before disassembly. Clean the hub mounting surface, inspect calipers and hardware for wear, and follow the pad bedding procedure recommended for the friction material after installation. Part number 4504-54142 is supplied as a matched brake kit, so no additional rotor preparation is required before mounting.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance. Each rotor is checked against OE specifications, and the rotors include a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to support stable friction performance from the first stop.
Brake Kit for Ford C-Max and Escape
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-54142, is a complete disc brake kit for front and rear service on select Ford applications. It combines coated rotors with matched pads to support consistent braking performance, cleaner installation, and OE-style fitment.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- Compatible With 2013-2017 Ford C-Max, front and rear
- Compatible With 2013-2016 Ford Escape, front and rear
- DFC GEOSPEC rotors feature a silver-gray corrosion-resistant coating
- Rotors are shipped dry and ready to install
- 5000 Advanced pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims are used to improve noise, vibration, and harshness control
- Rotor machining includes a non-directional finish for smoother pad bed-in
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built around matched friction and rotor specifications for everyday driving and service replacement. For Ford C-Max and Ford Escape brake repair, this kit brings together coated cast-iron rotors and advanced pads that are processed for stable friction behavior, quieter operation, and OE-style durability. Part number 4504-54142 is a practical choice when replacing worn brake components on 2013-2017 Ford C-Max or 2013-2016 Ford Escape models.
The rotor coating helps resist rust better than conventional paint or zinc finishes, while the dry-packaged design eliminates the need to clean oil from the rotor before installation. The pads are assembled with NVH-focused shims and prepared to reduce the need for extended bedding. This makes the kit well suited for drivers searching for a Ford C-Max front and rear brake kit or a Ford Escape front and rear disc brake kit with matched components.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from thin or glazed pads
- Brake noise caused by aged friction material or poor pad fit
- Surface rust on exposed rotor hats and vanes
- Longer service time caused by rotors that require cleaning before installation
Installation Notes and Tips
Verify vehicle year, model, and axle position before ordering. This kit is listed for front and rear service on the specified Ford applications, so compare the existing brake setup to the vehicle fitment details before disassembly. Clean the hub mounting surface, inspect calipers and hardware for wear, and follow the pad bedding procedure recommended for the friction material after installation. Part number 4504-54142 is supplied as a matched brake kit, so no additional rotor preparation is required before mounting.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance. Each rotor is checked against OE specifications, and the rotors include a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to support stable friction performance from the first stop.
Description
Brake Kit for Ford C-Max and Escape
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-54142, is a complete disc brake kit for front and rear service on select Ford applications. It combines coated rotors with matched pads to support consistent braking performance, cleaner installation, and OE-style fitment.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- Compatible With 2013-2017 Ford C-Max, front and rear
- Compatible With 2013-2016 Ford Escape, front and rear
- DFC GEOSPEC rotors feature a silver-gray corrosion-resistant coating
- Rotors are shipped dry and ready to install
- 5000 Advanced pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims are used to improve noise, vibration, and harshness control
- Rotor machining includes a non-directional finish for smoother pad bed-in
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is built around matched friction and rotor specifications for everyday driving and service replacement. For Ford C-Max and Ford Escape brake repair, this kit brings together coated cast-iron rotors and advanced pads that are processed for stable friction behavior, quieter operation, and OE-style durability. Part number 4504-54142 is a practical choice when replacing worn brake components on 2013-2017 Ford C-Max or 2013-2016 Ford Escape models.
The rotor coating helps resist rust better than conventional paint or zinc finishes, while the dry-packaged design eliminates the need to clean oil from the rotor before installation. The pads are assembled with NVH-focused shims and prepared to reduce the need for extended bedding. This makes the kit well suited for drivers searching for a Ford C-Max front and rear brake kit or a Ford Escape front and rear disc brake kit with matched components.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from thin or glazed pads
- Brake noise caused by aged friction material or poor pad fit
- Surface rust on exposed rotor hats and vanes
- Longer service time caused by rotors that require cleaning before installation
Installation Notes and Tips
Verify vehicle year, model, and axle position before ordering. This kit is listed for front and rear service on the specified Ford applications, so compare the existing brake setup to the vehicle fitment details before disassembly. Clean the hub mounting surface, inspect calipers and hardware for wear, and follow the pad bedding procedure recommended for the friction material after installation. Part number 4504-54142 is supplied as a matched brake kit, so no additional rotor preparation is required before mounting.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance. Each rotor is checked against OE specifications, and the rotors include a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to support stable friction performance from the first stop.
