Dynamite Friction 4504-54138 Disc Brake Kit - Front and Rear
Brake Kit for Ford Mustang Performance Applications
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched friction material for front and rear brake service. Part number 4504-54138 is built for Ford Mustang applications with Performance Brakes or Performance Package coverage, giving you a complete disc brake kit in one package.
Key Features
- Complete front and rear disc brake kit with rotors and pads
- DFC 5000 Advanced Brake Pads with post-cured friction material for stable performance
- Scorched pad surface to reduce initial break-in time
- Rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust
- Dry-processed rotors ship ready to install without oil removal
- Non-directional rotor finish for more even pad bed-in and smoother braking
- OE-spec cast iron construction and tight machining tolerances
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched service kit for drivers who want OE-style fitment and consistent braking response. The rotors use G3000/G11H18 cast iron and are machined to precise tolerances, then finished with a non-directional surface to support even pad contact. The coated rotor surface helps fight corrosion while simplifying installation because the parts arrive dry and ready to mount. This part number, 4504-54138, is a direct service solution for Ford Mustang brake maintenance where front and rear components are replaced together.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pads
- Brake noise caused by worn friction material
- Corrosion on exposed rotor surfaces
- Extended service time from rotors that require cleaning before installation
Installation Notes
Fits 2013-2014 Ford Mustang, front and rear, compatible with vehicles equipped with Performance Brakes. Fits 2012 Ford Mustang, front and rear, with Performance Package. Fits 2007-2009 Ford Mustang, front and rear. Verify brake package details before ordering, since fitment depends on the vehicle’s brake configuration. Part number 4504-54138 is intended for complete axle service, so inspect calipers, pads, and rotor mounting surfaces during installation.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, with vented rotors electronically corrected when needed. The rotors are manufactured to meet OE specifications, and the kit includes a 12-month warranty against defects in material and workmanship.
Brake Kit for Ford Mustang Performance Applications
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched friction material for front and rear brake service. Part number 4504-54138 is built for Ford Mustang applications with Performance Brakes or Performance Package coverage, giving you a complete disc brake kit in one package.
Key Features
- Complete front and rear disc brake kit with rotors and pads
- DFC 5000 Advanced Brake Pads with post-cured friction material for stable performance
- Scorched pad surface to reduce initial break-in time
- Rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust
- Dry-processed rotors ship ready to install without oil removal
- Non-directional rotor finish for more even pad bed-in and smoother braking
- OE-spec cast iron construction and tight machining tolerances
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched service kit for drivers who want OE-style fitment and consistent braking response. The rotors use G3000/G11H18 cast iron and are machined to precise tolerances, then finished with a non-directional surface to support even pad contact. The coated rotor surface helps fight corrosion while simplifying installation because the parts arrive dry and ready to mount. This part number, 4504-54138, is a direct service solution for Ford Mustang brake maintenance where front and rear components are replaced together.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pads
- Brake noise caused by worn friction material
- Corrosion on exposed rotor surfaces
- Extended service time from rotors that require cleaning before installation
Installation Notes
Fits 2013-2014 Ford Mustang, front and rear, compatible with vehicles equipped with Performance Brakes. Fits 2012 Ford Mustang, front and rear, with Performance Package. Fits 2007-2009 Ford Mustang, front and rear. Verify brake package details before ordering, since fitment depends on the vehicle’s brake configuration. Part number 4504-54138 is intended for complete axle service, so inspect calipers, pads, and rotor mounting surfaces during installation.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, with vented rotors electronically corrected when needed. The rotors are manufactured to meet OE specifications, and the kit includes a 12-month warranty against defects in material and workmanship.
Original: $365.61
-65%$365.61
$127.96Description
Brake Kit for Ford Mustang Performance Applications
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched friction material for front and rear brake service. Part number 4504-54138 is built for Ford Mustang applications with Performance Brakes or Performance Package coverage, giving you a complete disc brake kit in one package.
Key Features
- Complete front and rear disc brake kit with rotors and pads
- DFC 5000 Advanced Brake Pads with post-cured friction material for stable performance
- Scorched pad surface to reduce initial break-in time
- Rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray finish that resists rust
- Dry-processed rotors ship ready to install without oil removal
- Non-directional rotor finish for more even pad bed-in and smoother braking
- OE-spec cast iron construction and tight machining tolerances
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched service kit for drivers who want OE-style fitment and consistent braking response. The rotors use G3000/G11H18 cast iron and are machined to precise tolerances, then finished with a non-directional surface to support even pad contact. The coated rotor surface helps fight corrosion while simplifying installation because the parts arrive dry and ready to mount. This part number, 4504-54138, is a direct service solution for Ford Mustang brake maintenance where front and rear components are replaced together.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pads
- Brake noise caused by worn friction material
- Corrosion on exposed rotor surfaces
- Extended service time from rotors that require cleaning before installation
Installation Notes
Fits 2013-2014 Ford Mustang, front and rear, compatible with vehicles equipped with Performance Brakes. Fits 2012 Ford Mustang, front and rear, with Performance Package. Fits 2007-2009 Ford Mustang, front and rear. Verify brake package details before ordering, since fitment depends on the vehicle’s brake configuration. Part number 4504-54138 is intended for complete axle service, so inspect calipers, pads, and rotor mounting surfaces during installation.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, with vented rotors electronically corrected when needed. The rotors are manufactured to meet OE specifications, and the kit includes a 12-month warranty against defects in material and workmanship.
