Dynamite Friction 4504-54132 Disc Brake Kit - Front and Rear
Brake Kit for 2013-2018 Ford Focus
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-54132, is a disc brake kit for the front and rear positions on select Ford Focus models. It combines coated rotors with advanced friction pads for a complete brake service package built around OE-style fitment and consistent stopping performance.
Key Features
- Complete disc brake kit with rotors and pads
- Compatible with 2013-2018 Ford Focus, front and rear
- DFC 5000 Advanced pads are post-cured for stable friction performance
- Pads are scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- GeoSpec coated rotors feature a silver-gray corrosion-resistant finish
- Rotors are shipped dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter braking
DFC 5000 Advanced Brake Pads
The 5000 Advanced brake pad line is built for vehicles that need precise friction characteristics and dependable pedal response. For the Ford Focus, the pads are post-cured for stable performance and scorched to reduce the amount of initial bedding required. The shim design is aimed at improving NVH control during everyday driving.
Detailed Description
Part number 4504-54132 pairs DFC GEOSPEC coated rotors with 5000 Advanced brake pads for a front and rear brake service on 2013-2018 Ford Focus models. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to promote even pad contact. The coating is designed to resist rust better than conventional paint or zinc finishes, while the dry packaging helps reduce prep time during installation. This kit is a practical choice for Ford Focus brake replacement when you want matched rotor and pad components in one package.
Common Brake Service Issues
- Brake pulsation from worn or uneven rotors
- Noise during braking from aged pads or rotor surfaces
- Reduced stopping response from worn friction material
- Rust buildup on exposed rotor surfaces
- Extended service time when rotors and pads are sourced separately
Installation Notes
Fits 2013-2018 Ford Focus, front and rear. Verify axle position before installation and confirm rotor dimensions against the vehicle’s brake system. Clean the rotor friction surfaces before assembly if needed, and follow standard brake bedding procedures after installation. Part number 4504-54132 is supplied as a brake kit for service replacement, not as a standalone rotor or pad set.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors are also checked against OE specifications before release. DFC 5000 Advanced pads are post-cured and assembled with premium shims for consistent performance characteristics. Rotor coverage includes a 12-month warranty against defects in material and workmanship.
Brake Kit for 2013-2018 Ford Focus
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-54132, is a disc brake kit for the front and rear positions on select Ford Focus models. It combines coated rotors with advanced friction pads for a complete brake service package built around OE-style fitment and consistent stopping performance.
Key Features
- Complete disc brake kit with rotors and pads
- Compatible with 2013-2018 Ford Focus, front and rear
- DFC 5000 Advanced pads are post-cured for stable friction performance
- Pads are scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- GeoSpec coated rotors feature a silver-gray corrosion-resistant finish
- Rotors are shipped dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter braking
DFC 5000 Advanced Brake Pads
The 5000 Advanced brake pad line is built for vehicles that need precise friction characteristics and dependable pedal response. For the Ford Focus, the pads are post-cured for stable performance and scorched to reduce the amount of initial bedding required. The shim design is aimed at improving NVH control during everyday driving.
Detailed Description
Part number 4504-54132 pairs DFC GEOSPEC coated rotors with 5000 Advanced brake pads for a front and rear brake service on 2013-2018 Ford Focus models. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to promote even pad contact. The coating is designed to resist rust better than conventional paint or zinc finishes, while the dry packaging helps reduce prep time during installation. This kit is a practical choice for Ford Focus brake replacement when you want matched rotor and pad components in one package.
Common Brake Service Issues
- Brake pulsation from worn or uneven rotors
- Noise during braking from aged pads or rotor surfaces
- Reduced stopping response from worn friction material
- Rust buildup on exposed rotor surfaces
- Extended service time when rotors and pads are sourced separately
Installation Notes
Fits 2013-2018 Ford Focus, front and rear. Verify axle position before installation and confirm rotor dimensions against the vehicle’s brake system. Clean the rotor friction surfaces before assembly if needed, and follow standard brake bedding procedures after installation. Part number 4504-54132 is supplied as a brake kit for service replacement, not as a standalone rotor or pad set.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors are also checked against OE specifications before release. DFC 5000 Advanced pads are post-cured and assembled with premium shims for consistent performance characteristics. Rotor coverage includes a 12-month warranty against defects in material and workmanship.
Original: $280.82
-65%$280.82
$98.29Description
Brake Kit for 2013-2018 Ford Focus
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-54132, is a disc brake kit for the front and rear positions on select Ford Focus models. It combines coated rotors with advanced friction pads for a complete brake service package built around OE-style fitment and consistent stopping performance.
Key Features
- Complete disc brake kit with rotors and pads
- Compatible with 2013-2018 Ford Focus, front and rear
- DFC 5000 Advanced pads are post-cured for stable friction performance
- Pads are scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- GeoSpec coated rotors feature a silver-gray corrosion-resistant finish
- Rotors are shipped dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter braking
DFC 5000 Advanced Brake Pads
The 5000 Advanced brake pad line is built for vehicles that need precise friction characteristics and dependable pedal response. For the Ford Focus, the pads are post-cured for stable performance and scorched to reduce the amount of initial bedding required. The shim design is aimed at improving NVH control during everyday driving.
Detailed Description
Part number 4504-54132 pairs DFC GEOSPEC coated rotors with 5000 Advanced brake pads for a front and rear brake service on 2013-2018 Ford Focus models. The rotors use G3000/G11H18 cast iron and are machined to tight tolerances, then finished with a non-directional surface to promote even pad contact. The coating is designed to resist rust better than conventional paint or zinc finishes, while the dry packaging helps reduce prep time during installation. This kit is a practical choice for Ford Focus brake replacement when you want matched rotor and pad components in one package.
Common Brake Service Issues
- Brake pulsation from worn or uneven rotors
- Noise during braking from aged pads or rotor surfaces
- Reduced stopping response from worn friction material
- Rust buildup on exposed rotor surfaces
- Extended service time when rotors and pads are sourced separately
Installation Notes
Fits 2013-2018 Ford Focus, front and rear. Verify axle position before installation and confirm rotor dimensions against the vehicle’s brake system. Clean the rotor friction surfaces before assembly if needed, and follow standard brake bedding procedures after installation. Part number 4504-54132 is supplied as a brake kit for service replacement, not as a standalone rotor or pad set.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors are also checked against OE specifications before release. DFC 5000 Advanced pads are post-cured and assembled with premium shims for consistent performance characteristics. Rotor coverage includes a 12-month warranty against defects in material and workmanship.
