Dynamite Friction 4504-54130 Disc Brake Kit - Front and Rear
Brake Kit for Ford Mustang Performance Brakes
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for 2012-2014 Ford Mustang front and rear brake service, including 2013-2014 Mustang models equipped with Performance Brakes. Part number 4504-54130 combines coated rotors and advanced friction pads in one service kit for a direct brake replacement on the specified applications.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- Fits 2012 Ford Mustang, front and rear
- Fits 2013-2014 Ford Mustang, front and rear, with Performance Brakes
- DFC 5000 Advanced Brake Pads are post-cured for stable friction performance
- Scorched pad surface helps reduce initial break-in time
- Premium rubber-steel-rubber shims support quieter operation and reduced NVH
- GeoSpec coated rotors feature a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother stops
- Part number 4504-54130
Product Line Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads pairs two DFC product lines in one package. The 5000 Advanced Brake Pads are formulated for consistent friction behavior and use premium shims for improved noise, vibration, and harshness control. The GeoSpec rotor line uses coated cast-iron rotors machined to OE-style tolerances, with a non-directional finish and balance inspection on vented rotors.
Detailed Description
This brake service kit is engineered for Mustang owners replacing worn front and rear brake components on the listed model years. The coated rotors are made from G3000/G11H18 cast iron and processed to OE specifications for durability, reliability, and stability. The pad and rotor combination is designed to support even bedding, quieter braking, and corrosion resistance in everyday driving conditions. Part number 4504-54130 is a practical choice for a Ford Mustang brake job when you need matched components in one package.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from thin or glazed pads
- Brake noise caused by aged pad material or rotor surface wear
- Rust buildup on exposed rotor surfaces
- Longer pedal travel associated with brake wear
Installation Notes and Tips
Fits 2012 Ford Mustang, front and rear. Fits 2013-2014 Ford Mustang, front and rear, with Performance Brakes. Confirm brake package details before ordering, since the 2013-2014 fitment is limited to vehicles equipped with Performance Brakes. The rotors are shipped dry and ready to install, which helps reduce prep time during service. For best results, follow proper brake bedding procedures after installation.
Quality Assurance
Each DFC GeoSpec rotor is machined, inspected, and checked against critical OE-spec attributes before release. Vented rotors are balance-inspected and corrected when needed, and every rotor includes a 12-month warranty against defects in material and workmanship. Part number 4504-54130 is backed by this inspection process for the specified Ford Mustang applications.
Brake Kit for Ford Mustang Performance Brakes
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for 2012-2014 Ford Mustang front and rear brake service, including 2013-2014 Mustang models equipped with Performance Brakes. Part number 4504-54130 combines coated rotors and advanced friction pads in one service kit for a direct brake replacement on the specified applications.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- Fits 2012 Ford Mustang, front and rear
- Fits 2013-2014 Ford Mustang, front and rear, with Performance Brakes
- DFC 5000 Advanced Brake Pads are post-cured for stable friction performance
- Scorched pad surface helps reduce initial break-in time
- Premium rubber-steel-rubber shims support quieter operation and reduced NVH
- GeoSpec coated rotors feature a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother stops
- Part number 4504-54130
Product Line Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads pairs two DFC product lines in one package. The 5000 Advanced Brake Pads are formulated for consistent friction behavior and use premium shims for improved noise, vibration, and harshness control. The GeoSpec rotor line uses coated cast-iron rotors machined to OE-style tolerances, with a non-directional finish and balance inspection on vented rotors.
Detailed Description
This brake service kit is engineered for Mustang owners replacing worn front and rear brake components on the listed model years. The coated rotors are made from G3000/G11H18 cast iron and processed to OE specifications for durability, reliability, and stability. The pad and rotor combination is designed to support even bedding, quieter braking, and corrosion resistance in everyday driving conditions. Part number 4504-54130 is a practical choice for a Ford Mustang brake job when you need matched components in one package.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from thin or glazed pads
- Brake noise caused by aged pad material or rotor surface wear
- Rust buildup on exposed rotor surfaces
- Longer pedal travel associated with brake wear
Installation Notes and Tips
Fits 2012 Ford Mustang, front and rear. Fits 2013-2014 Ford Mustang, front and rear, with Performance Brakes. Confirm brake package details before ordering, since the 2013-2014 fitment is limited to vehicles equipped with Performance Brakes. The rotors are shipped dry and ready to install, which helps reduce prep time during service. For best results, follow proper brake bedding procedures after installation.
Quality Assurance
Each DFC GeoSpec rotor is machined, inspected, and checked against critical OE-spec attributes before release. Vented rotors are balance-inspected and corrected when needed, and every rotor includes a 12-month warranty against defects in material and workmanship. Part number 4504-54130 is backed by this inspection process for the specified Ford Mustang applications.
Original: $389.49
-65%$389.49
$136.32Description
Brake Kit for Ford Mustang Performance Brakes
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is built for 2012-2014 Ford Mustang front and rear brake service, including 2013-2014 Mustang models equipped with Performance Brakes. Part number 4504-54130 combines coated rotors and advanced friction pads in one service kit for a direct brake replacement on the specified applications.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- Fits 2012 Ford Mustang, front and rear
- Fits 2013-2014 Ford Mustang, front and rear, with Performance Brakes
- DFC 5000 Advanced Brake Pads are post-cured for stable friction performance
- Scorched pad surface helps reduce initial break-in time
- Premium rubber-steel-rubber shims support quieter operation and reduced NVH
- GeoSpec coated rotors feature a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother stops
- Part number 4504-54130
Product Line Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads pairs two DFC product lines in one package. The 5000 Advanced Brake Pads are formulated for consistent friction behavior and use premium shims for improved noise, vibration, and harshness control. The GeoSpec rotor line uses coated cast-iron rotors machined to OE-style tolerances, with a non-directional finish and balance inspection on vented rotors.
Detailed Description
This brake service kit is engineered for Mustang owners replacing worn front and rear brake components on the listed model years. The coated rotors are made from G3000/G11H18 cast iron and processed to OE specifications for durability, reliability, and stability. The pad and rotor combination is designed to support even bedding, quieter braking, and corrosion resistance in everyday driving conditions. Part number 4504-54130 is a practical choice for a Ford Mustang brake job when you need matched components in one package.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from thin or glazed pads
- Brake noise caused by aged pad material or rotor surface wear
- Rust buildup on exposed rotor surfaces
- Longer pedal travel associated with brake wear
Installation Notes and Tips
Fits 2012 Ford Mustang, front and rear. Fits 2013-2014 Ford Mustang, front and rear, with Performance Brakes. Confirm brake package details before ordering, since the 2013-2014 fitment is limited to vehicles equipped with Performance Brakes. The rotors are shipped dry and ready to install, which helps reduce prep time during service. For best results, follow proper brake bedding procedures after installation.
Quality Assurance
Each DFC GeoSpec rotor is machined, inspected, and checked against critical OE-spec attributes before release. Vented rotors are balance-inspected and corrected when needed, and every rotor includes a 12-month warranty against defects in material and workmanship. Part number 4504-54130 is backed by this inspection process for the specified Ford Mustang applications.
