Dynamite Friction 4504-54088 Disc Brake Kit - Front and Rear
Brake Kit for Fusion and MKZ
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched pads for front and rear service. It is built for drivers looking for a complete brake job solution for select Ford Fusion and Lincoln MKZ applications, including the 2013-2020 Ford Fusion and 2013-2016 Lincoln MKZ.
Key Features
- Complete disc brake kit with rotors and 5000 Advanced brake pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors ship ready to install without oil removal
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 100% post-cured pads for stable friction performance
- Scorched pad surface to reduce initial break-in time
- Rubber-steel-rubber shims for improved noise, vibration, and harshness control
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched service kit for front and rear brake replacement. The rotors use a durable coated finish to resist rust better than conventional paint or zinc coatings, while the dry-ready design helps reduce prep time during installation. The pads are formulated for consistent friction, then post-cured and scorched to support predictable stopping performance from the first stop. This part number, 4504-54088, is listed for 2013-2020 Ford Fusion and 2013-2016 Lincoln MKZ applications, including Fusion models excluding Plug-In Type. Part number 4504-54088 is a direct reference for this brake service kit, and 4504-54088 may be used when searching for a complete front and rear brake solution for Ford Fusion and Lincoln MKZ service.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pads
- Brake noise caused by worn friction material or poor pad fit
- Rust buildup on exposed rotor surfaces
- Longer service time when rotors require extra cleaning before installation
Installation Notes
Compatible With 2013-2020 Ford Fusion, front and rear, and 2013-2016 Lincoln MKZ, front and rear. For 2014-2016 Ford Fusion, this kit fits front and rear models excluding Plug-In Type. Verify axle position and vehicle configuration before ordering. The rotors are shipped dry and ready for installation, which can reduce prep work during a standard brake service. Use proper brake service procedures and bed-in the pads according to the friction material requirements.
Quality Assurance
DFC machines each rotor to tight tolerances, applies a non-directional finish, and inspects critical dimensions to OE specifications. Vented rotors are balance-checked and corrected when needed. The rotors carry a 12-month warranty against defects in material and workmanship.
Brake Kit for Fusion and MKZ
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched pads for front and rear service. It is built for drivers looking for a complete brake job solution for select Ford Fusion and Lincoln MKZ applications, including the 2013-2020 Ford Fusion and 2013-2016 Lincoln MKZ.
Key Features
- Complete disc brake kit with rotors and 5000 Advanced brake pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors ship ready to install without oil removal
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 100% post-cured pads for stable friction performance
- Scorched pad surface to reduce initial break-in time
- Rubber-steel-rubber shims for improved noise, vibration, and harshness control
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched service kit for front and rear brake replacement. The rotors use a durable coated finish to resist rust better than conventional paint or zinc coatings, while the dry-ready design helps reduce prep time during installation. The pads are formulated for consistent friction, then post-cured and scorched to support predictable stopping performance from the first stop. This part number, 4504-54088, is listed for 2013-2020 Ford Fusion and 2013-2016 Lincoln MKZ applications, including Fusion models excluding Plug-In Type. Part number 4504-54088 is a direct reference for this brake service kit, and 4504-54088 may be used when searching for a complete front and rear brake solution for Ford Fusion and Lincoln MKZ service.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pads
- Brake noise caused by worn friction material or poor pad fit
- Rust buildup on exposed rotor surfaces
- Longer service time when rotors require extra cleaning before installation
Installation Notes
Compatible With 2013-2020 Ford Fusion, front and rear, and 2013-2016 Lincoln MKZ, front and rear. For 2014-2016 Ford Fusion, this kit fits front and rear models excluding Plug-In Type. Verify axle position and vehicle configuration before ordering. The rotors are shipped dry and ready for installation, which can reduce prep work during a standard brake service. Use proper brake service procedures and bed-in the pads according to the friction material requirements.
Quality Assurance
DFC machines each rotor to tight tolerances, applies a non-directional finish, and inspects critical dimensions to OE specifications. Vented rotors are balance-checked and corrected when needed. The rotors carry a 12-month warranty against defects in material and workmanship.
Description
Brake Kit for Fusion and MKZ
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched pads for front and rear service. It is built for drivers looking for a complete brake job solution for select Ford Fusion and Lincoln MKZ applications, including the 2013-2020 Ford Fusion and 2013-2016 Lincoln MKZ.
Key Features
- Complete disc brake kit with rotors and 5000 Advanced brake pads
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors ship ready to install without oil removal
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 100% post-cured pads for stable friction performance
- Scorched pad surface to reduce initial break-in time
- Rubber-steel-rubber shims for improved noise, vibration, and harshness control
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched service kit for front and rear brake replacement. The rotors use a durable coated finish to resist rust better than conventional paint or zinc coatings, while the dry-ready design helps reduce prep time during installation. The pads are formulated for consistent friction, then post-cured and scorched to support predictable stopping performance from the first stop. This part number, 4504-54088, is listed for 2013-2020 Ford Fusion and 2013-2016 Lincoln MKZ applications, including Fusion models excluding Plug-In Type. Part number 4504-54088 is a direct reference for this brake service kit, and 4504-54088 may be used when searching for a complete front and rear brake solution for Ford Fusion and Lincoln MKZ service.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from aged pads
- Brake noise caused by worn friction material or poor pad fit
- Rust buildup on exposed rotor surfaces
- Longer service time when rotors require extra cleaning before installation
Installation Notes
Compatible With 2013-2020 Ford Fusion, front and rear, and 2013-2016 Lincoln MKZ, front and rear. For 2014-2016 Ford Fusion, this kit fits front and rear models excluding Plug-In Type. Verify axle position and vehicle configuration before ordering. The rotors are shipped dry and ready for installation, which can reduce prep work during a standard brake service. Use proper brake service procedures and bed-in the pads according to the friction material requirements.
Quality Assurance
DFC machines each rotor to tight tolerances, applies a non-directional finish, and inspects critical dimensions to OE specifications. Vented rotors are balance-checked and corrected when needed. The rotors carry a 12-month warranty against defects in material and workmanship.
