Dynamite Friction 4504-54086 Disc Brake Kit - Front and Rear
DFC GEOSPEC Brake Kit for Taurus
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front and rear disc brake kit for 2013-2019 Ford Taurus applications. It combines coated rotors with advanced friction pads to support consistent braking performance, quieter operation, and easier service.
Key Features
- Fits 2013-2019 Ford Taurus, front and rear
- Part number: 4504-54086
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Dry-packed rotors ready for installation without oil removal
- Non-directional rotor finish for more even pad bed-in
- OE-style G3000/G11H18 cast iron rotor specification
- 100% inspected rotors with balance correction on vented units
Product Line Details
The DFC GEOSPEC rotor and 5000 Advanced Brake Pad combination is built as a complete service kit for drivers who want matched friction and rotor components in one package. For the Ford Taurus, this setup is aimed at restoring braking response with parts engineered to OE-style specifications and finished for cleaner installation.
Detailed Description
DFC 5000 Advanced Brake Pads are post cured for stable friction behavior and scorched to remove uncured bonding agents, which helps reduce the need for extended bedding-in. The pads also use premium rubber-steel-rubber shims to help manage noise, vibration, and harshness. The GEOSPEC rotors are coated to resist rust, machined to tight tolerances, and finished with a non-directional surface to promote smoother contact with the pads. This part number, 4504-54086, is a direct fit service kit for 2013-2019 Ford Taurus front and rear brake service.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise during braking from aged pads or rotor surfaces
- Reduced stopping performance from worn friction material
- Rust buildup on exposed rotor surfaces
- Longer service time caused by rotors that require cleaning before installation
Installation Notes
Fits 2013-2019 Ford Taurus, front and rear. Verify axle condition, pad wear, and rotor thickness before installation. The rotors are shipped dry and ready to install, which eliminates the need to remove protective oil. Proper bedding-in after installation helps establish even pad transfer and consistent braking feel.
Quality Assurance
DFC machines these rotors to OE specifications and inspects critical dimensions during production. Vented rotors are balance-checked and corrected when needed, and every rotor passes a final inspection for fit and finish. Part number 4504-54086 includes a 12-month warranty against defects in material and workmanship.
DFC GEOSPEC Brake Kit for Taurus
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front and rear disc brake kit for 2013-2019 Ford Taurus applications. It combines coated rotors with advanced friction pads to support consistent braking performance, quieter operation, and easier service.
Key Features
- Fits 2013-2019 Ford Taurus, front and rear
- Part number: 4504-54086
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Dry-packed rotors ready for installation without oil removal
- Non-directional rotor finish for more even pad bed-in
- OE-style G3000/G11H18 cast iron rotor specification
- 100% inspected rotors with balance correction on vented units
Product Line Details
The DFC GEOSPEC rotor and 5000 Advanced Brake Pad combination is built as a complete service kit for drivers who want matched friction and rotor components in one package. For the Ford Taurus, this setup is aimed at restoring braking response with parts engineered to OE-style specifications and finished for cleaner installation.
Detailed Description
DFC 5000 Advanced Brake Pads are post cured for stable friction behavior and scorched to remove uncured bonding agents, which helps reduce the need for extended bedding-in. The pads also use premium rubber-steel-rubber shims to help manage noise, vibration, and harshness. The GEOSPEC rotors are coated to resist rust, machined to tight tolerances, and finished with a non-directional surface to promote smoother contact with the pads. This part number, 4504-54086, is a direct fit service kit for 2013-2019 Ford Taurus front and rear brake service.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise during braking from aged pads or rotor surfaces
- Reduced stopping performance from worn friction material
- Rust buildup on exposed rotor surfaces
- Longer service time caused by rotors that require cleaning before installation
Installation Notes
Fits 2013-2019 Ford Taurus, front and rear. Verify axle condition, pad wear, and rotor thickness before installation. The rotors are shipped dry and ready to install, which eliminates the need to remove protective oil. Proper bedding-in after installation helps establish even pad transfer and consistent braking feel.
Quality Assurance
DFC machines these rotors to OE specifications and inspects critical dimensions during production. Vented rotors are balance-checked and corrected when needed, and every rotor passes a final inspection for fit and finish. Part number 4504-54086 includes a 12-month warranty against defects in material and workmanship.
Description
DFC GEOSPEC Brake Kit for Taurus
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front and rear disc brake kit for 2013-2019 Ford Taurus applications. It combines coated rotors with advanced friction pads to support consistent braking performance, quieter operation, and easier service.
Key Features
- Fits 2013-2019 Ford Taurus, front and rear
- Part number: 4504-54086
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- Dry-packed rotors ready for installation without oil removal
- Non-directional rotor finish for more even pad bed-in
- OE-style G3000/G11H18 cast iron rotor specification
- 100% inspected rotors with balance correction on vented units
Product Line Details
The DFC GEOSPEC rotor and 5000 Advanced Brake Pad combination is built as a complete service kit for drivers who want matched friction and rotor components in one package. For the Ford Taurus, this setup is aimed at restoring braking response with parts engineered to OE-style specifications and finished for cleaner installation.
Detailed Description
DFC 5000 Advanced Brake Pads are post cured for stable friction behavior and scorched to remove uncured bonding agents, which helps reduce the need for extended bedding-in. The pads also use premium rubber-steel-rubber shims to help manage noise, vibration, and harshness. The GEOSPEC rotors are coated to resist rust, machined to tight tolerances, and finished with a non-directional surface to promote smoother contact with the pads. This part number, 4504-54086, is a direct fit service kit for 2013-2019 Ford Taurus front and rear brake service.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise during braking from aged pads or rotor surfaces
- Reduced stopping performance from worn friction material
- Rust buildup on exposed rotor surfaces
- Longer service time caused by rotors that require cleaning before installation
Installation Notes
Fits 2013-2019 Ford Taurus, front and rear. Verify axle condition, pad wear, and rotor thickness before installation. The rotors are shipped dry and ready to install, which eliminates the need to remove protective oil. Proper bedding-in after installation helps establish even pad transfer and consistent braking feel.
Quality Assurance
DFC machines these rotors to OE specifications and inspects critical dimensions during production. Vented rotors are balance-checked and corrected when needed, and every rotor passes a final inspection for fit and finish. Part number 4504-54086 includes a 12-month warranty against defects in material and workmanship.
