Dynamite Friction 4504-54039 Disc Brake Kit - Front and Rear
Brake Kit for Ford F-150 and Lincoln Mark LT
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads is a front and rear disc brake kit for select 2004-2008 Ford F-150, 2004 Ford F-150 Heritage, and 2006-2008 Lincoln Mark LT applications. Part number 4504-54039 combines coated rotors and matched friction material for a complete brake service on the same axle set.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- Fits 2005-2008 Ford F-150, front and rear, 6 lug wheels, compatible with drum brake hardware kits
- Fits 2006-2008 Lincoln Mark LT, front and rear, 6 lug wheels, base payload package
- Fits 2004 Ford F-150 New Body Style, front and rear, 6 lug wheels
- Fits 2004 Ford F-150 Heritage, front and rear, 6 lug wheels
- GEOSPEC rotors use a coated finish to resist rust and arrive dry for direct installation
- Non-directional rotor finish supports even pad bed-in and smoother braking feel
- 5000 Advanced Brake Pads are post-cured, scorched, and built with rubber-steel-rubber shims for NVH control
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are built for drivers servicing a Ford F-150 or Lincoln Mark LT brake system with OE-style fit and finish. The rotors are machined to tight tolerances, inspected for balance on vented designs, and finished with a non-directional surface to support consistent pad contact. The coated rotor surface helps protect against rust while the dry packaging eliminates the need to clean off oil before installation. The 5000 Advanced pads are formulated for stable friction performance and reduced noise, vibration, and harshness through premium shims.
Part number 4504-54039 is a practical choice for a full brake refresh on 2004-2008 Ford F-150 and 2006-2008 Lincoln Mark LT trucks where both rotor condition and pad wear need to be addressed together. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake pulsation caused by worn or uneven rotors
- Noise from pads with reduced friction material or poor shim performance
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn brake components
- Uneven brake feel during daily driving or towing use
Installation Notes and Tips
Verify wheel lug count and trim/package details before ordering. This kit is listed for front and rear service on the specified Ford F-150 and Lincoln Mark LT applications, including 6 lug wheel configurations noted in the fitment data. Clean hub surfaces before rotor installation and follow proper brake bedding procedures after installation to help the pads and rotors seat evenly. Part number 4504-54039 should be matched to the exact year, make, model, and notes shown in the fitment list.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications using G3000/G11H18 cast iron, then inspected for critical dimensions and balance. Every rotor is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched to support stable friction performance from the first stop.
Brake Kit for Ford F-150 and Lincoln Mark LT
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads is a front and rear disc brake kit for select 2004-2008 Ford F-150, 2004 Ford F-150 Heritage, and 2006-2008 Lincoln Mark LT applications. Part number 4504-54039 combines coated rotors and matched friction material for a complete brake service on the same axle set.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- Fits 2005-2008 Ford F-150, front and rear, 6 lug wheels, compatible with drum brake hardware kits
- Fits 2006-2008 Lincoln Mark LT, front and rear, 6 lug wheels, base payload package
- Fits 2004 Ford F-150 New Body Style, front and rear, 6 lug wheels
- Fits 2004 Ford F-150 Heritage, front and rear, 6 lug wheels
- GEOSPEC rotors use a coated finish to resist rust and arrive dry for direct installation
- Non-directional rotor finish supports even pad bed-in and smoother braking feel
- 5000 Advanced Brake Pads are post-cured, scorched, and built with rubber-steel-rubber shims for NVH control
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are built for drivers servicing a Ford F-150 or Lincoln Mark LT brake system with OE-style fit and finish. The rotors are machined to tight tolerances, inspected for balance on vented designs, and finished with a non-directional surface to support consistent pad contact. The coated rotor surface helps protect against rust while the dry packaging eliminates the need to clean off oil before installation. The 5000 Advanced pads are formulated for stable friction performance and reduced noise, vibration, and harshness through premium shims.
Part number 4504-54039 is a practical choice for a full brake refresh on 2004-2008 Ford F-150 and 2006-2008 Lincoln Mark LT trucks where both rotor condition and pad wear need to be addressed together. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake pulsation caused by worn or uneven rotors
- Noise from pads with reduced friction material or poor shim performance
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn brake components
- Uneven brake feel during daily driving or towing use
Installation Notes and Tips
Verify wheel lug count and trim/package details before ordering. This kit is listed for front and rear service on the specified Ford F-150 and Lincoln Mark LT applications, including 6 lug wheel configurations noted in the fitment data. Clean hub surfaces before rotor installation and follow proper brake bedding procedures after installation to help the pads and rotors seat evenly. Part number 4504-54039 should be matched to the exact year, make, model, and notes shown in the fitment list.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications using G3000/G11H18 cast iron, then inspected for critical dimensions and balance. Every rotor is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched to support stable friction performance from the first stop.
Original: $500.65
-65%$500.65
$175.23Description
Brake Kit for Ford F-150 and Lincoln Mark LT
Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads is a front and rear disc brake kit for select 2004-2008 Ford F-150, 2004 Ford F-150 Heritage, and 2006-2008 Lincoln Mark LT applications. Part number 4504-54039 combines coated rotors and matched friction material for a complete brake service on the same axle set.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- Fits 2005-2008 Ford F-150, front and rear, 6 lug wheels, compatible with drum brake hardware kits
- Fits 2006-2008 Lincoln Mark LT, front and rear, 6 lug wheels, base payload package
- Fits 2004 Ford F-150 New Body Style, front and rear, 6 lug wheels
- Fits 2004 Ford F-150 Heritage, front and rear, 6 lug wheels
- GEOSPEC rotors use a coated finish to resist rust and arrive dry for direct installation
- Non-directional rotor finish supports even pad bed-in and smoother braking feel
- 5000 Advanced Brake Pads are post-cured, scorched, and built with rubber-steel-rubber shims for NVH control
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are built for drivers servicing a Ford F-150 or Lincoln Mark LT brake system with OE-style fit and finish. The rotors are machined to tight tolerances, inspected for balance on vented designs, and finished with a non-directional surface to support consistent pad contact. The coated rotor surface helps protect against rust while the dry packaging eliminates the need to clean off oil before installation. The 5000 Advanced pads are formulated for stable friction performance and reduced noise, vibration, and harshness through premium shims.
Part number 4504-54039 is a practical choice for a full brake refresh on 2004-2008 Ford F-150 and 2006-2008 Lincoln Mark LT trucks where both rotor condition and pad wear need to be addressed together. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake pulsation caused by worn or uneven rotors
- Noise from pads with reduced friction material or poor shim performance
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn brake components
- Uneven brake feel during daily driving or towing use
Installation Notes and Tips
Verify wheel lug count and trim/package details before ordering. This kit is listed for front and rear service on the specified Ford F-150 and Lincoln Mark LT applications, including 6 lug wheel configurations noted in the fitment data. Clean hub surfaces before rotor installation and follow proper brake bedding procedures after installation to help the pads and rotors seat evenly. Part number 4504-54039 should be matched to the exact year, make, model, and notes shown in the fitment list.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications using G3000/G11H18 cast iron, then inspected for critical dimensions and balance. Every rotor is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched to support stable friction performance from the first stop.
