Dynamite Friction 4504-54030 Disc Brake Kit - Front and Rear
Brake Kit for 1999-2004 Mustang
This Dynamite Friction disc brake kit combines DFC GEOSPEC coated rotors with 5000 Advanced brake pads for the front and rear of the 1999-2004 Ford Mustang. It is built for buyers looking for a complete brake service kit with OE-style fitment, corrosion protection, and consistent stopping performance.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed rotors ship ready to install, with no oil coating to clean off
- G3000/G11H18 cast iron rotor specification for OEM-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 100% inspected rotors, including balance correction on vented rotors when required
- DFC 5000 Advanced pads are post-cured, scorched, and assembled with premium rubber-steel-rubber shims for improved NVH control
- Part number 4504-54030 for catalog verification
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is engineered as a service kit for drivers who want matched brake components in one package. For Ford Mustang brake replacement, this kit pairs coated rotors with friction material formulated for stable performance, reduced initial break-in, and quieter operation. The rotor coating helps protect against corrosion, while the machining and finishing process supports consistent contact with the pads. Part number 4504-54030 is a direct reference for this front and rear brake kit application.
Compatible With 1999-2004 Ford Mustang, front and rear. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise from aged pads or poor pad-to-rotor contact
- Longer stopping distances from worn friction material
- Uneven braking feel during everyday driving
Installation Notes
Install as a complete brake service kit on the front and rear axles of the 1999-2004 Ford Mustang. Clean all mounting surfaces before assembly, verify rotor orientation and pad placement, and follow proper bedding procedures after installation. The rotors are shipped dry and ready to install, which reduces prep time during brake service. Confirm vehicle-specific brake configuration before beginning work.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance. Each rotor is checked against OE specifications, and the rotors include a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to support stable friction performance from the initial stop.
Brake Kit for 1999-2004 Mustang
This Dynamite Friction disc brake kit combines DFC GEOSPEC coated rotors with 5000 Advanced brake pads for the front and rear of the 1999-2004 Ford Mustang. It is built for buyers looking for a complete brake service kit with OE-style fitment, corrosion protection, and consistent stopping performance.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed rotors ship ready to install, with no oil coating to clean off
- G3000/G11H18 cast iron rotor specification for OEM-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 100% inspected rotors, including balance correction on vented rotors when required
- DFC 5000 Advanced pads are post-cured, scorched, and assembled with premium rubber-steel-rubber shims for improved NVH control
- Part number 4504-54030 for catalog verification
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is engineered as a service kit for drivers who want matched brake components in one package. For Ford Mustang brake replacement, this kit pairs coated rotors with friction material formulated for stable performance, reduced initial break-in, and quieter operation. The rotor coating helps protect against corrosion, while the machining and finishing process supports consistent contact with the pads. Part number 4504-54030 is a direct reference for this front and rear brake kit application.
Compatible With 1999-2004 Ford Mustang, front and rear. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise from aged pads or poor pad-to-rotor contact
- Longer stopping distances from worn friction material
- Uneven braking feel during everyday driving
Installation Notes
Install as a complete brake service kit on the front and rear axles of the 1999-2004 Ford Mustang. Clean all mounting surfaces before assembly, verify rotor orientation and pad placement, and follow proper bedding procedures after installation. The rotors are shipped dry and ready to install, which reduces prep time during brake service. Confirm vehicle-specific brake configuration before beginning work.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance. Each rotor is checked against OE specifications, and the rotors include a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to support stable friction performance from the initial stop.
Original: $302.29
-65%$302.29
$105.80Description
Brake Kit for 1999-2004 Mustang
This Dynamite Friction disc brake kit combines DFC GEOSPEC coated rotors with 5000 Advanced brake pads for the front and rear of the 1999-2004 Ford Mustang. It is built for buyers looking for a complete brake service kit with OE-style fitment, corrosion protection, and consistent stopping performance.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed rotors ship ready to install, with no oil coating to clean off
- G3000/G11H18 cast iron rotor specification for OEM-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 100% inspected rotors, including balance correction on vented rotors when required
- DFC 5000 Advanced pads are post-cured, scorched, and assembled with premium rubber-steel-rubber shims for improved NVH control
- Part number 4504-54030 for catalog verification
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is engineered as a service kit for drivers who want matched brake components in one package. For Ford Mustang brake replacement, this kit pairs coated rotors with friction material formulated for stable performance, reduced initial break-in, and quieter operation. The rotor coating helps protect against corrosion, while the machining and finishing process supports consistent contact with the pads. Part number 4504-54030 is a direct reference for this front and rear brake kit application.
Compatible With 1999-2004 Ford Mustang, front and rear. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise from aged pads or poor pad-to-rotor contact
- Longer stopping distances from worn friction material
- Uneven braking feel during everyday driving
Installation Notes
Install as a complete brake service kit on the front and rear axles of the 1999-2004 Ford Mustang. Clean all mounting surfaces before assembly, verify rotor orientation and pad placement, and follow proper bedding procedures after installation. The rotors are shipped dry and ready to install, which reduces prep time during brake service. Confirm vehicle-specific brake configuration before beginning work.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance. Each rotor is checked against OE specifications, and the rotors include a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to support stable friction performance from the initial stop.
