Dynamite Friction 4504-54017 Disc Brake Kit - Front and Rear
Brake Kit for Ford F-150 Heritage and Blackwood
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched friction material for service on select Ford and Lincoln trucks. Part number 4504-54017 is built for front and rear brake replacement on listed applications, including 2000-2003 Ford F-150, 2004 Ford F-150 Heritage, and 2002 Lincoln Blackwood.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims help improve noise, vibration, and harshness control
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is engineered as a matched brake service solution for drivers who want OE-focused fit and consistent braking behavior. The rotor coating is designed to resist rust better than conventional paint or zinc finishes, while the machining and balancing process helps support quiet operation and stable pedal feel. This part number, 4504-54017, is a direct-fit brake kit for 5-lug vehicles in the listed Ford F-150 and Lincoln Blackwood applications.
Compatible With 2000-2003 Ford F-150, front and rear; 2004 Ford F-150 Heritage, front and rear; and 2002 Lincoln Blackwood, front and rear. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake noise during stops
- Rotor surface rust and corrosion buildup
- Uneven pad bedding after brake service
- Brake vibration caused by rotor finish or balance issues
- Reduced stopping consistency from worn rotors and pads
Installation Notes and Tips
Install on the specified front and rear positions only for the listed vehicles. The rotors are shipped dry and ready for installation, which can reduce prep time during a brake job. Follow standard brake service procedures, verify 5-lug wheel configuration where noted, and inspect related brake components before reassembly. For best results, complete a proper pad bed-in procedure after installation.
Quality Assurance
Each rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. DFC states that every rotor is 100% inspected for OE-spec compliance, and the rotor set includes a 12-month warranty against defects in material and workmanship. The 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance from the first stop.
Brake Kit for Ford F-150 Heritage and Blackwood
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched friction material for service on select Ford and Lincoln trucks. Part number 4504-54017 is built for front and rear brake replacement on listed applications, including 2000-2003 Ford F-150, 2004 Ford F-150 Heritage, and 2002 Lincoln Blackwood.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims help improve noise, vibration, and harshness control
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is engineered as a matched brake service solution for drivers who want OE-focused fit and consistent braking behavior. The rotor coating is designed to resist rust better than conventional paint or zinc finishes, while the machining and balancing process helps support quiet operation and stable pedal feel. This part number, 4504-54017, is a direct-fit brake kit for 5-lug vehicles in the listed Ford F-150 and Lincoln Blackwood applications.
Compatible With 2000-2003 Ford F-150, front and rear; 2004 Ford F-150 Heritage, front and rear; and 2002 Lincoln Blackwood, front and rear. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake noise during stops
- Rotor surface rust and corrosion buildup
- Uneven pad bedding after brake service
- Brake vibration caused by rotor finish or balance issues
- Reduced stopping consistency from worn rotors and pads
Installation Notes and Tips
Install on the specified front and rear positions only for the listed vehicles. The rotors are shipped dry and ready for installation, which can reduce prep time during a brake job. Follow standard brake service procedures, verify 5-lug wheel configuration where noted, and inspect related brake components before reassembly. For best results, complete a proper pad bed-in procedure after installation.
Quality Assurance
Each rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. DFC states that every rotor is 100% inspected for OE-spec compliance, and the rotor set includes a 12-month warranty against defects in material and workmanship. The 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance from the first stop.
Description
Brake Kit for Ford F-150 Heritage and Blackwood
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched friction material for service on select Ford and Lincoln trucks. Part number 4504-54017 is built for front and rear brake replacement on listed applications, including 2000-2003 Ford F-150, 2004 Ford F-150 Heritage, and 2002 Lincoln Blackwood.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 5000 Advanced Brake Pads are post-cured and scorched to reduce initial break-in time
- Premium rubber-steel-rubber shims help improve noise, vibration, and harshness control
Product Details
The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line is engineered as a matched brake service solution for drivers who want OE-focused fit and consistent braking behavior. The rotor coating is designed to resist rust better than conventional paint or zinc finishes, while the machining and balancing process helps support quiet operation and stable pedal feel. This part number, 4504-54017, is a direct-fit brake kit for 5-lug vehicles in the listed Ford F-150 and Lincoln Blackwood applications.
Compatible With 2000-2003 Ford F-150, front and rear; 2004 Ford F-150 Heritage, front and rear; and 2002 Lincoln Blackwood, front and rear. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake noise during stops
- Rotor surface rust and corrosion buildup
- Uneven pad bedding after brake service
- Brake vibration caused by rotor finish or balance issues
- Reduced stopping consistency from worn rotors and pads
Installation Notes and Tips
Install on the specified front and rear positions only for the listed vehicles. The rotors are shipped dry and ready for installation, which can reduce prep time during a brake job. Follow standard brake service procedures, verify 5-lug wheel configuration where noted, and inspect related brake components before reassembly. For best results, complete a proper pad bed-in procedure after installation.
Quality Assurance
Each rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. DFC states that every rotor is 100% inspected for OE-spec compliance, and the rotor set includes a 12-month warranty against defects in material and workmanship. The 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance from the first stop.
