Dynamite Friction 4504-48036 Disc Brake Kit - Front and Rear
Brake Kit for Colorado and Canyon
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched pads in one service package. It is built for 2015-2020 Chevrolet Colorado and 2015-2020 GMC Canyon front and rear brake service, with components selected to work together for consistent stopping performance.
Part number 4504-48036 is a complete disc brake kit for drivers looking for a direct-service solution for Chevrolet Colorado brake kit and GMC Canyon brake kit applications. The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line focuses on rotor protection, pad conditioning, and OE-style fitment for routine brake replacement.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC 5000 Advanced Brake Pads are post-cured for stable friction performance
- Pads are scorched to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- GEOSPEC coated rotors provide a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Rotors are shipped dry and ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother braking
- G3000/G11H18 cast iron construction is machined to OE-style tolerances
- Vented rotors are balance-inspected and corrected when needed
- Part number 4504-48036
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched brake service kit for 2015-2020 Chevrolet Colorado and 2015-2020 GMC Canyon models. The coated rotor surface helps protect against corrosion during storage and service, while the pad formulation is prepared for stable friction and quieter operation. This makes the kit a practical choice for drivers searching for a 2015-2020 Chevrolet Colorado front and rear brake kit or a 2015-2020 GMC Canyon disc brake kit with OE-focused construction. Part number 4504-48036 is built to simplify brake replacement by pairing the correct friction material with rotors finished for direct installation.
Common Brake Issues This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Reduced stopping performance from worn pad material
- Brake noise related to pad wear or poor rotor finish
- Surface rust on rotors after storage or exposure
- Longer service time caused by cleaning oil-coated replacement rotors
Installation Notes
Install on the specified front and rear positions for the listed Chevrolet Colorado and GMC Canyon applications. The rotors are processed dry and ready to install, so no additional cleaning is required before service. For best results, follow standard brake service procedures, inspect related wear items, and complete a proper pad bed-in after installation. Verify vehicle fitment by year, make, model, and axle position before beginning work.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, machined to tight tolerances, and inspected for critical dimensions and balance. Every rotor includes a 12-month warranty against defects in material and workmanship. Part number 4504-48036 reflects a brake kit built for consistent fit and service quality on Chevrolet Colorado and GMC Canyon applications.
Brake Kit for Colorado and Canyon
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched pads in one service package. It is built for 2015-2020 Chevrolet Colorado and 2015-2020 GMC Canyon front and rear brake service, with components selected to work together for consistent stopping performance.
Part number 4504-48036 is a complete disc brake kit for drivers looking for a direct-service solution for Chevrolet Colorado brake kit and GMC Canyon brake kit applications. The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line focuses on rotor protection, pad conditioning, and OE-style fitment for routine brake replacement.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC 5000 Advanced Brake Pads are post-cured for stable friction performance
- Pads are scorched to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- GEOSPEC coated rotors provide a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Rotors are shipped dry and ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother braking
- G3000/G11H18 cast iron construction is machined to OE-style tolerances
- Vented rotors are balance-inspected and corrected when needed
- Part number 4504-48036
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched brake service kit for 2015-2020 Chevrolet Colorado and 2015-2020 GMC Canyon models. The coated rotor surface helps protect against corrosion during storage and service, while the pad formulation is prepared for stable friction and quieter operation. This makes the kit a practical choice for drivers searching for a 2015-2020 Chevrolet Colorado front and rear brake kit or a 2015-2020 GMC Canyon disc brake kit with OE-focused construction. Part number 4504-48036 is built to simplify brake replacement by pairing the correct friction material with rotors finished for direct installation.
Common Brake Issues This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Reduced stopping performance from worn pad material
- Brake noise related to pad wear or poor rotor finish
- Surface rust on rotors after storage or exposure
- Longer service time caused by cleaning oil-coated replacement rotors
Installation Notes
Install on the specified front and rear positions for the listed Chevrolet Colorado and GMC Canyon applications. The rotors are processed dry and ready to install, so no additional cleaning is required before service. For best results, follow standard brake service procedures, inspect related wear items, and complete a proper pad bed-in after installation. Verify vehicle fitment by year, make, model, and axle position before beginning work.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, machined to tight tolerances, and inspected for critical dimensions and balance. Every rotor includes a 12-month warranty against defects in material and workmanship. Part number 4504-48036 reflects a brake kit built for consistent fit and service quality on Chevrolet Colorado and GMC Canyon applications.
Description
Brake Kit for Colorado and Canyon
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched pads in one service package. It is built for 2015-2020 Chevrolet Colorado and 2015-2020 GMC Canyon front and rear brake service, with components selected to work together for consistent stopping performance.
Part number 4504-48036 is a complete disc brake kit for drivers looking for a direct-service solution for Chevrolet Colorado brake kit and GMC Canyon brake kit applications. The DFC GEOSPEC Rotors with 5000 Advanced Brake Pads line focuses on rotor protection, pad conditioning, and OE-style fitment for routine brake replacement.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC 5000 Advanced Brake Pads are post-cured for stable friction performance
- Pads are scorched to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- GEOSPEC coated rotors provide a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Rotors are shipped dry and ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother braking
- G3000/G11H18 cast iron construction is machined to OE-style tolerances
- Vented rotors are balance-inspected and corrected when needed
- Part number 4504-48036
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a matched brake service kit for 2015-2020 Chevrolet Colorado and 2015-2020 GMC Canyon models. The coated rotor surface helps protect against corrosion during storage and service, while the pad formulation is prepared for stable friction and quieter operation. This makes the kit a practical choice for drivers searching for a 2015-2020 Chevrolet Colorado front and rear brake kit or a 2015-2020 GMC Canyon disc brake kit with OE-focused construction. Part number 4504-48036 is built to simplify brake replacement by pairing the correct friction material with rotors finished for direct installation.
Common Brake Issues This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Reduced stopping performance from worn pad material
- Brake noise related to pad wear or poor rotor finish
- Surface rust on rotors after storage or exposure
- Longer service time caused by cleaning oil-coated replacement rotors
Installation Notes
Install on the specified front and rear positions for the listed Chevrolet Colorado and GMC Canyon applications. The rotors are processed dry and ready to install, so no additional cleaning is required before service. For best results, follow standard brake service procedures, inspect related wear items, and complete a proper pad bed-in after installation. Verify vehicle fitment by year, make, model, and axle position before beginning work.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, machined to tight tolerances, and inspected for critical dimensions and balance. Every rotor includes a 12-month warranty against defects in material and workmanship. Part number 4504-48036 reflects a brake kit built for consistent fit and service quality on Chevrolet Colorado and GMC Canyon applications.
