Dynamite Friction 4504-46043 Disc Brake Kit - Front and Rear
Brake Kit for Buick Allure and LaCrosse
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a complete disc brake service solution for select 2008-2009 Buick Allure and 2008-2009 Buick LaCrosse models. Part number 4504-46043 combines coated rotors and matched friction material for front and rear brake service in one package.
Key Features
- Compatible with 2008-2009 Buick Allure, front and rear
- Compatible with 2008-2009 Buick LaCrosse, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are shipped dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Details
Part number 4504-46043 is built for drivers servicing the brake system on a Buick Allure or Buick LaCrosse from 2008-2009. The DFC GEOSPEC rotor line uses a protective coating to resist rust better than conventional paint or zinc finishes, while the dry-packaged design eliminates the need to clean oil from the rotor before installation. The 5000 Advanced Brake Pads are formulated for consistent friction, with post-curing and scorching steps that reduce initial break-in time and help deliver stopping performance from the first stop. Together, these components provide a matched brake service kit for front and rear axle replacement.
Common Brake Issues This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Reduced stopping performance from worn pad friction material
- Brake noise related to pad wear or rotor surface condition
- Rust buildup on exposed rotor surfaces
- Extended service time from cleaning oil-coated replacement rotors
Installation Notes and Tips
Before installation, confirm vehicle fitment by year, make, model, and axle position. This kit is listed for front and rear service on 2008-2009 Buick Allure and 2008-2009 Buick LaCrosse applications. For proper results, inspect calipers, slides, and brake fluid condition during service, and follow the vehicle manufacturer’s brake bedding procedure after installation. Part number 4504-46043 is intended for direct brake service on the listed applications.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and 100% inspected for critical dimensions and balance on vented rotors. Each rotor is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured, scorched, and assembled with premium shims to support consistent performance and NVH control.
Brake Kit for Buick Allure and LaCrosse
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a complete disc brake service solution for select 2008-2009 Buick Allure and 2008-2009 Buick LaCrosse models. Part number 4504-46043 combines coated rotors and matched friction material for front and rear brake service in one package.
Key Features
- Compatible with 2008-2009 Buick Allure, front and rear
- Compatible with 2008-2009 Buick LaCrosse, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are shipped dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Details
Part number 4504-46043 is built for drivers servicing the brake system on a Buick Allure or Buick LaCrosse from 2008-2009. The DFC GEOSPEC rotor line uses a protective coating to resist rust better than conventional paint or zinc finishes, while the dry-packaged design eliminates the need to clean oil from the rotor before installation. The 5000 Advanced Brake Pads are formulated for consistent friction, with post-curing and scorching steps that reduce initial break-in time and help deliver stopping performance from the first stop. Together, these components provide a matched brake service kit for front and rear axle replacement.
Common Brake Issues This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Reduced stopping performance from worn pad friction material
- Brake noise related to pad wear or rotor surface condition
- Rust buildup on exposed rotor surfaces
- Extended service time from cleaning oil-coated replacement rotors
Installation Notes and Tips
Before installation, confirm vehicle fitment by year, make, model, and axle position. This kit is listed for front and rear service on 2008-2009 Buick Allure and 2008-2009 Buick LaCrosse applications. For proper results, inspect calipers, slides, and brake fluid condition during service, and follow the vehicle manufacturer’s brake bedding procedure after installation. Part number 4504-46043 is intended for direct brake service on the listed applications.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and 100% inspected for critical dimensions and balance on vented rotors. Each rotor is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured, scorched, and assembled with premium shims to support consistent performance and NVH control.
Description
Brake Kit for Buick Allure and LaCrosse
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a complete disc brake service solution for select 2008-2009 Buick Allure and 2008-2009 Buick LaCrosse models. Part number 4504-46043 combines coated rotors and matched friction material for front and rear brake service in one package.
Key Features
- Compatible with 2008-2009 Buick Allure, front and rear
- Compatible with 2008-2009 Buick LaCrosse, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are shipped dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Details
Part number 4504-46043 is built for drivers servicing the brake system on a Buick Allure or Buick LaCrosse from 2008-2009. The DFC GEOSPEC rotor line uses a protective coating to resist rust better than conventional paint or zinc finishes, while the dry-packaged design eliminates the need to clean oil from the rotor before installation. The 5000 Advanced Brake Pads are formulated for consistent friction, with post-curing and scorching steps that reduce initial break-in time and help deliver stopping performance from the first stop. Together, these components provide a matched brake service kit for front and rear axle replacement.
Common Brake Issues This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Reduced stopping performance from worn pad friction material
- Brake noise related to pad wear or rotor surface condition
- Rust buildup on exposed rotor surfaces
- Extended service time from cleaning oil-coated replacement rotors
Installation Notes and Tips
Before installation, confirm vehicle fitment by year, make, model, and axle position. This kit is listed for front and rear service on 2008-2009 Buick Allure and 2008-2009 Buick LaCrosse applications. For proper results, inspect calipers, slides, and brake fluid condition during service, and follow the vehicle manufacturer’s brake bedding procedure after installation. Part number 4504-46043 is intended for direct brake service on the listed applications.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and 100% inspected for critical dimensions and balance on vented rotors. Each rotor is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured, scorched, and assembled with premium shims to support consistent performance and NVH control.
