Dynamite Friction 4504-45021 Disc Brake Kit - Front and Rear
Brake Kit for Select GM Vehicles
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front and rear disc brake kit built for select Buick, Chevrolet, and GMC applications. Part number 4504-45021 combines coated rotors and matched friction material for a complete brake service on vehicles such as the Buick Regal Sportback, Chevrolet Equinox, GMC Terrain, Buick LaCrosse, and Chevrolet Malibu.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-shipped rotors ready for installation without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and quieter stops
- 100% inspected rotors, including balance correction on vented rotors
- DFC 5000 Advanced pads with post-curing, scorching, and rubber-steel-rubber shims
- Part number 4504-45021
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered to match OEM specifications for fit, durability, and braking consistency. The coated rotor surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging saves prep time during installation. The included DFC 5000 Advanced pads are post-cured for stable friction performance and scorched to reduce initial break-in effort, with shims added to improve noise, vibration, and harshness control. This part number 4504-45021 is a practical OE-style brake service solution for drivers maintaining braking performance on the Buick Regal Sportback, Chevrolet Equinox, GMC Terrain, Buick LaCrosse, and Chevrolet Malibu.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Brake noise and vibration during everyday driving
- Extended service time caused by rotor prep and cleaning
Installation Notes
Compatible With 2018-2020 Buick Regal Sportback, front and rear; 2018-2020 Chevrolet Equinox, front and rear; 2018-2020 GMC Terrain, front and rear; 2018-2019 Buick LaCrosse, front and rear; and 2016-2019 Chevrolet Malibu, front and rear, including electric parking brake compatible disc brake rotor applications. Verify axle position and brake configuration before installation. The rotors are shipped dry and ready to install, and the non-directional finish supports a smoother pad bed-in process.
Quality Assurance
Each rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance where applicable. DFC states that every rotor is covered by a 12-month warranty against defects in material and workmanship. Part number 4504-45021 is built to OE-style standards for consistent service results.
Brake Kit for Select GM Vehicles
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front and rear disc brake kit built for select Buick, Chevrolet, and GMC applications. Part number 4504-45021 combines coated rotors and matched friction material for a complete brake service on vehicles such as the Buick Regal Sportback, Chevrolet Equinox, GMC Terrain, Buick LaCrosse, and Chevrolet Malibu.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-shipped rotors ready for installation without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and quieter stops
- 100% inspected rotors, including balance correction on vented rotors
- DFC 5000 Advanced pads with post-curing, scorching, and rubber-steel-rubber shims
- Part number 4504-45021
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered to match OEM specifications for fit, durability, and braking consistency. The coated rotor surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging saves prep time during installation. The included DFC 5000 Advanced pads are post-cured for stable friction performance and scorched to reduce initial break-in effort, with shims added to improve noise, vibration, and harshness control. This part number 4504-45021 is a practical OE-style brake service solution for drivers maintaining braking performance on the Buick Regal Sportback, Chevrolet Equinox, GMC Terrain, Buick LaCrosse, and Chevrolet Malibu.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Brake noise and vibration during everyday driving
- Extended service time caused by rotor prep and cleaning
Installation Notes
Compatible With 2018-2020 Buick Regal Sportback, front and rear; 2018-2020 Chevrolet Equinox, front and rear; 2018-2020 GMC Terrain, front and rear; 2018-2019 Buick LaCrosse, front and rear; and 2016-2019 Chevrolet Malibu, front and rear, including electric parking brake compatible disc brake rotor applications. Verify axle position and brake configuration before installation. The rotors are shipped dry and ready to install, and the non-directional finish supports a smoother pad bed-in process.
Quality Assurance
Each rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance where applicable. DFC states that every rotor is covered by a 12-month warranty against defects in material and workmanship. Part number 4504-45021 is built to OE-style standards for consistent service results.
Original: $330.40
-65%$330.40
$115.64Description
Brake Kit for Select GM Vehicles
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front and rear disc brake kit built for select Buick, Chevrolet, and GMC applications. Part number 4504-45021 combines coated rotors and matched friction material for a complete brake service on vehicles such as the Buick Regal Sportback, Chevrolet Equinox, GMC Terrain, Buick LaCrosse, and Chevrolet Malibu.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-shipped rotors ready for installation without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and quieter stops
- 100% inspected rotors, including balance correction on vented rotors
- DFC 5000 Advanced pads with post-curing, scorching, and rubber-steel-rubber shims
- Part number 4504-45021
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered to match OEM specifications for fit, durability, and braking consistency. The coated rotor surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging saves prep time during installation. The included DFC 5000 Advanced pads are post-cured for stable friction performance and scorched to reduce initial break-in effort, with shims added to improve noise, vibration, and harshness control. This part number 4504-45021 is a practical OE-style brake service solution for drivers maintaining braking performance on the Buick Regal Sportback, Chevrolet Equinox, GMC Terrain, Buick LaCrosse, and Chevrolet Malibu.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Brake noise and vibration during everyday driving
- Extended service time caused by rotor prep and cleaning
Installation Notes
Compatible With 2018-2020 Buick Regal Sportback, front and rear; 2018-2020 Chevrolet Equinox, front and rear; 2018-2020 GMC Terrain, front and rear; 2018-2019 Buick LaCrosse, front and rear; and 2016-2019 Chevrolet Malibu, front and rear, including electric parking brake compatible disc brake rotor applications. Verify axle position and brake configuration before installation. The rotors are shipped dry and ready to install, and the non-directional finish supports a smoother pad bed-in process.
Quality Assurance
Each rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance where applicable. DFC states that every rotor is covered by a 12-month warranty against defects in material and workmanship. Part number 4504-45021 is built to OE-style standards for consistent service results.
