Dynamite Friction 4504-40011 Disc Brake Kit - Front and Rear
Brake Kit for Sprinter 2500 and 3500
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched friction material for service on select Dodge Sprinter vans. Part number 4504-40011 is built for front and rear brake replacement on covered Sprinter 2500 and Sprinter 3500 applications.
Key Features
- Complete disc brake kit with DFC GEOSPEC coated rotors and 5000 Advanced brake pads
- Fits 2003-2006 Dodge Sprinter 2500, front and rear
- Fits 2003-2005 Dodge Sprinter 3500, front and rear
- 285mm front rotor application noted for Sprinter 2500 fitment
- For vehicles with pin style brake pad sensors
- For Wabco front and ATE rear calipers
- Rotors are processed dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced pads are post-cured, scorched, and fitted with rubber-steel-rubber shims
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-40011, is a service kit for Dodge Sprinter brake maintenance where rotor and pad replacement are performed together. The coated rotors use a silver-gray corrosion-resistant finish and OE-style cast iron construction, while the pads are formulated for stable friction performance and reduced initial break-in. This kit is a practical choice for owners searching for a Dodge Sprinter 2500 brake kit, Dodge Sprinter 3500 front and rear brake replacement, or a complete rotor and pad set for 2003-2006 Sprinter service.
The DFC 5000 Advanced pad line is built around consistent friction behavior. Pads are post cured for stable performance, scorched to remove uncured bonding agents, and assembled with premium shims to improve noise, vibration, and harshness control. The GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and OE-spec critical dimensions.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Squealing or noisy braking from aged pads
- Reduced stopping performance from heat-worn friction material
- Rust buildup on exposed rotor surfaces
- Extended service time when replacing pads and rotors separately
Installation Notes
Verify the vehicle’s brake configuration before ordering. This kit is listed for 2003-2006 Dodge Sprinter 2500 and 2003-2005 Dodge Sprinter 3500 with 285mm front rotors, pin style brake pad sensors, Wabco front calipers, and ATE rear calipers. The rotors are shipped dry and ready to install, so no oil removal step is required before service. Follow standard brake service procedures and confirm proper pad bed-in after installation.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions, balance, and OE-spec conformity after machining. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4504-40011 is engineered as a matched brake service solution for covered Dodge Sprinter applications.
Brake Kit for Sprinter 2500 and 3500
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched friction material for service on select Dodge Sprinter vans. Part number 4504-40011 is built for front and rear brake replacement on covered Sprinter 2500 and Sprinter 3500 applications.
Key Features
- Complete disc brake kit with DFC GEOSPEC coated rotors and 5000 Advanced brake pads
- Fits 2003-2006 Dodge Sprinter 2500, front and rear
- Fits 2003-2005 Dodge Sprinter 3500, front and rear
- 285mm front rotor application noted for Sprinter 2500 fitment
- For vehicles with pin style brake pad sensors
- For Wabco front and ATE rear calipers
- Rotors are processed dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced pads are post-cured, scorched, and fitted with rubber-steel-rubber shims
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-40011, is a service kit for Dodge Sprinter brake maintenance where rotor and pad replacement are performed together. The coated rotors use a silver-gray corrosion-resistant finish and OE-style cast iron construction, while the pads are formulated for stable friction performance and reduced initial break-in. This kit is a practical choice for owners searching for a Dodge Sprinter 2500 brake kit, Dodge Sprinter 3500 front and rear brake replacement, or a complete rotor and pad set for 2003-2006 Sprinter service.
The DFC 5000 Advanced pad line is built around consistent friction behavior. Pads are post cured for stable performance, scorched to remove uncured bonding agents, and assembled with premium shims to improve noise, vibration, and harshness control. The GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and OE-spec critical dimensions.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Squealing or noisy braking from aged pads
- Reduced stopping performance from heat-worn friction material
- Rust buildup on exposed rotor surfaces
- Extended service time when replacing pads and rotors separately
Installation Notes
Verify the vehicle’s brake configuration before ordering. This kit is listed for 2003-2006 Dodge Sprinter 2500 and 2003-2005 Dodge Sprinter 3500 with 285mm front rotors, pin style brake pad sensors, Wabco front calipers, and ATE rear calipers. The rotors are shipped dry and ready to install, so no oil removal step is required before service. Follow standard brake service procedures and confirm proper pad bed-in after installation.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions, balance, and OE-spec conformity after machining. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4504-40011 is engineered as a matched brake service solution for covered Dodge Sprinter applications.
Description
Brake Kit for Sprinter 2500 and 3500
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated rotors and matched friction material for service on select Dodge Sprinter vans. Part number 4504-40011 is built for front and rear brake replacement on covered Sprinter 2500 and Sprinter 3500 applications.
Key Features
- Complete disc brake kit with DFC GEOSPEC coated rotors and 5000 Advanced brake pads
- Fits 2003-2006 Dodge Sprinter 2500, front and rear
- Fits 2003-2005 Dodge Sprinter 3500, front and rear
- 285mm front rotor application noted for Sprinter 2500 fitment
- For vehicles with pin style brake pad sensors
- For Wabco front and ATE rear calipers
- Rotors are processed dry and ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 5000 Advanced pads are post-cured, scorched, and fitted with rubber-steel-rubber shims
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads, part number 4504-40011, is a service kit for Dodge Sprinter brake maintenance where rotor and pad replacement are performed together. The coated rotors use a silver-gray corrosion-resistant finish and OE-style cast iron construction, while the pads are formulated for stable friction performance and reduced initial break-in. This kit is a practical choice for owners searching for a Dodge Sprinter 2500 brake kit, Dodge Sprinter 3500 front and rear brake replacement, or a complete rotor and pad set for 2003-2006 Sprinter service.
The DFC 5000 Advanced pad line is built around consistent friction behavior. Pads are post cured for stable performance, scorched to remove uncured bonding agents, and assembled with premium shims to improve noise, vibration, and harshness control. The GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and OE-spec critical dimensions.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Squealing or noisy braking from aged pads
- Reduced stopping performance from heat-worn friction material
- Rust buildup on exposed rotor surfaces
- Extended service time when replacing pads and rotors separately
Installation Notes
Verify the vehicle’s brake configuration before ordering. This kit is listed for 2003-2006 Dodge Sprinter 2500 and 2003-2005 Dodge Sprinter 3500 with 285mm front rotors, pin style brake pad sensors, Wabco front calipers, and ATE rear calipers. The rotors are shipped dry and ready to install, so no oil removal step is required before service. Follow standard brake service procedures and confirm proper pad bed-in after installation.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions, balance, and OE-spec conformity after machining. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4504-40011 is engineered as a matched brake service solution for covered Dodge Sprinter applications.
