Dynamite Friction 4504-40008 Disc Brake Kit - Front and Rear
Brake Kit for Dodge Durango and Ram 1500
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front and rear disc brake kit built for direct-service replacement on select Dodge trucks and SUVs. Part number 4504-40008 combines coated rotors and matched pads for a complete brake service on 2002-2005 Dodge Ram 1500 and 2004-2006 Dodge Durango applications.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are shipped dry and ready to install, with no oil coating to clean off
- G3000/G11H18 cast iron construction engineered to OE specifications
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented units when needed
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are built for drivers who need a complete brake refresh without piecing together separate components. The coated rotors are machined to tight tolerances, finished for consistent contact, and inspected to meet OE specifications. The pad set is formulated for stable friction, with surface treatment that helps reduce initial break-in time and improve stopping response from the first stop. This part number, 4504-40008, is a practical choice for Dodge Durango and Dodge Ram 1500 brake service where rotor condition, pad wear, and brake noise all need to be addressed together.
Common Issues This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Reduced stopping performance from worn pads
- Brake noise from aged friction material or poor pad fitment
- Rust buildup on exposed rotor surfaces
- Extended service time from separate rotor and pad sourcing
Installation Notes
Compatible With 2004-2006 Dodge Durango, front and rear. Compatible With 2002-2005 Dodge Ram 1500, front and rear. The rotors are processed dry and ready to install, which helps reduce prep time during brake service. For best results, follow the vehicle manufacturer’s brake service procedure, clean all mating surfaces, and verify proper pad bedding after installation. Part number 4504-40008 is intended for complete axle service on the listed applications.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, then inspected for critical dimensions and balance on vented applications. The rotors include a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post-cured, scorched, and assembled with premium shims to support consistent brake feel and NVH control.
Brake Kit for Dodge Durango and Ram 1500
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front and rear disc brake kit built for direct-service replacement on select Dodge trucks and SUVs. Part number 4504-40008 combines coated rotors and matched pads for a complete brake service on 2002-2005 Dodge Ram 1500 and 2004-2006 Dodge Durango applications.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are shipped dry and ready to install, with no oil coating to clean off
- G3000/G11H18 cast iron construction engineered to OE specifications
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented units when needed
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are built for drivers who need a complete brake refresh without piecing together separate components. The coated rotors are machined to tight tolerances, finished for consistent contact, and inspected to meet OE specifications. The pad set is formulated for stable friction, with surface treatment that helps reduce initial break-in time and improve stopping response from the first stop. This part number, 4504-40008, is a practical choice for Dodge Durango and Dodge Ram 1500 brake service where rotor condition, pad wear, and brake noise all need to be addressed together.
Common Issues This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Reduced stopping performance from worn pads
- Brake noise from aged friction material or poor pad fitment
- Rust buildup on exposed rotor surfaces
- Extended service time from separate rotor and pad sourcing
Installation Notes
Compatible With 2004-2006 Dodge Durango, front and rear. Compatible With 2002-2005 Dodge Ram 1500, front and rear. The rotors are processed dry and ready to install, which helps reduce prep time during brake service. For best results, follow the vehicle manufacturer’s brake service procedure, clean all mating surfaces, and verify proper pad bedding after installation. Part number 4504-40008 is intended for complete axle service on the listed applications.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, then inspected for critical dimensions and balance on vented applications. The rotors include a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post-cured, scorched, and assembled with premium shims to support consistent brake feel and NVH control.
Description
Brake Kit for Dodge Durango and Ram 1500
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit is a front and rear disc brake kit built for direct-service replacement on select Dodge trucks and SUVs. Part number 4504-40008 combines coated rotors and matched pads for a complete brake service on 2002-2005 Dodge Ram 1500 and 2004-2006 Dodge Durango applications.
Key Features
- Complete disc brake kit with rotors and pads for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are shipped dry and ready to install, with no oil coating to clean off
- G3000/G11H18 cast iron construction engineered to OE specifications
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented units when needed
- DFC 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are built for drivers who need a complete brake refresh without piecing together separate components. The coated rotors are machined to tight tolerances, finished for consistent contact, and inspected to meet OE specifications. The pad set is formulated for stable friction, with surface treatment that helps reduce initial break-in time and improve stopping response from the first stop. This part number, 4504-40008, is a practical choice for Dodge Durango and Dodge Ram 1500 brake service where rotor condition, pad wear, and brake noise all need to be addressed together.
Common Issues This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Reduced stopping performance from worn pads
- Brake noise from aged friction material or poor pad fitment
- Rust buildup on exposed rotor surfaces
- Extended service time from separate rotor and pad sourcing
Installation Notes
Compatible With 2004-2006 Dodge Durango, front and rear. Compatible With 2002-2005 Dodge Ram 1500, front and rear. The rotors are processed dry and ready to install, which helps reduce prep time during brake service. For best results, follow the vehicle manufacturer’s brake service procedure, clean all mating surfaces, and verify proper pad bedding after installation. Part number 4504-40008 is intended for complete axle service on the listed applications.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, then inspected for critical dimensions and balance on vented applications. The rotors include a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post-cured, scorched, and assembled with premium shims to support consistent brake feel and NVH control.
