
Dynamite Friction 4504-39007 Disc Brake Kit - Front and Rear
Brake Kit for Mitsubishi, Chrysler, Jeep, and Dodge
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched friction material in one service package. Part number 4504-39007 is built for front and rear brake service on select Mitsubishi Lancer, Outlander, Outlander Sport, RVR, Chrysler 200, Jeep Compass, Jeep Patriot, and Dodge Avenger applications.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron construction for OE-style durability and stability
- Non-directional rotor finish supports faster pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented units
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a complete disc brake kit for drivers replacing worn rotors and pads at the same time. The coated rotor surface helps resist rust better than conventional painted or zinc-coated finishes, while the dry-ready design saves prep time during brake service. The pads are formulated for consistent friction, with post-curing and scorching used to reduce initial break-in effort and improve stopping response from the first stop. This kit is a practical choice for brake repair on a 2008-2016 Mitsubishi Lancer, 2013-2014 Chrysler 200, or 2009-2011 Jeep Patriot when servicing both axles.
Common Brake Issues This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise from aged pads or degraded shims
- Reduced braking consistency from heat-worn friction material
- Extended service time from rotors that require cleaning before installation
Installation Notes and Fitment
- Fits 2008-2016 Mitsubishi Lancer, front and rear
- Fits 2013-2014 Chrysler 200, front and rear; 295mm front and 302mm rear rotors
- Fits 2012-2013 Mitsubishi Outlander, front and rear
- Fits 2011-2012 Chrysler 200, front and rear; 302mm rear rotors
- Fits 2011-2012 Mitsubishi Outlander Sport, front and rear
- Fits 2011-2012 Mitsubishi RVR, front and rear
- Fits 2009-2011 Jeep Compass, front and rear; 302mm rear rotors
- Fits 2009-2011 Jeep Patriot, front and rear; 302mm rear rotors
- Fits 2008-2011 Mitsubishi Outlander, front and rear; 5-passenger vehicle
- Fits 2008-2009 Dodge Avenger, front and rear
Verify rotor size and vehicle configuration before installation, especially on Chrysler 200, Jeep Compass, and Jeep Patriot applications with rear rotor size notes. This part number, 4504-39007, is intended for direct brake service on the listed vehicles and positions.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance where applicable. The rotors carry a 12-month warranty against defects in material and workmanship.
Brake Kit for Mitsubishi, Chrysler, Jeep, and Dodge
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched friction material in one service package. Part number 4504-39007 is built for front and rear brake service on select Mitsubishi Lancer, Outlander, Outlander Sport, RVR, Chrysler 200, Jeep Compass, Jeep Patriot, and Dodge Avenger applications.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron construction for OE-style durability and stability
- Non-directional rotor finish supports faster pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented units
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a complete disc brake kit for drivers replacing worn rotors and pads at the same time. The coated rotor surface helps resist rust better than conventional painted or zinc-coated finishes, while the dry-ready design saves prep time during brake service. The pads are formulated for consistent friction, with post-curing and scorching used to reduce initial break-in effort and improve stopping response from the first stop. This kit is a practical choice for brake repair on a 2008-2016 Mitsubishi Lancer, 2013-2014 Chrysler 200, or 2009-2011 Jeep Patriot when servicing both axles.
Common Brake Issues This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise from aged pads or degraded shims
- Reduced braking consistency from heat-worn friction material
- Extended service time from rotors that require cleaning before installation
Installation Notes and Fitment
- Fits 2008-2016 Mitsubishi Lancer, front and rear
- Fits 2013-2014 Chrysler 200, front and rear; 295mm front and 302mm rear rotors
- Fits 2012-2013 Mitsubishi Outlander, front and rear
- Fits 2011-2012 Chrysler 200, front and rear; 302mm rear rotors
- Fits 2011-2012 Mitsubishi Outlander Sport, front and rear
- Fits 2011-2012 Mitsubishi RVR, front and rear
- Fits 2009-2011 Jeep Compass, front and rear; 302mm rear rotors
- Fits 2009-2011 Jeep Patriot, front and rear; 302mm rear rotors
- Fits 2008-2011 Mitsubishi Outlander, front and rear; 5-passenger vehicle
- Fits 2008-2009 Dodge Avenger, front and rear
Verify rotor size and vehicle configuration before installation, especially on Chrysler 200, Jeep Compass, and Jeep Patriot applications with rear rotor size notes. This part number, 4504-39007, is intended for direct brake service on the listed vehicles and positions.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance where applicable. The rotors carry a 12-month warranty against defects in material and workmanship.
Original: $299.72
-65%$299.72
$104.90Description
Brake Kit for Mitsubishi, Chrysler, Jeep, and Dodge
The Dynamite Friction DFC GEOSPEC Rotors with 5000 Advanced Brake Pads kit combines coated brake rotors and matched friction material in one service package. Part number 4504-39007 is built for front and rear brake service on select Mitsubishi Lancer, Outlander, Outlander Sport, RVR, Chrysler 200, Jeep Compass, Jeep Patriot, and Dodge Avenger applications.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron construction for OE-style durability and stability
- Non-directional rotor finish supports faster pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented units
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
Product Details
DFC GEOSPEC Rotors with 5000 Advanced Brake Pads are engineered as a complete disc brake kit for drivers replacing worn rotors and pads at the same time. The coated rotor surface helps resist rust better than conventional painted or zinc-coated finishes, while the dry-ready design saves prep time during brake service. The pads are formulated for consistent friction, with post-curing and scorching used to reduce initial break-in effort and improve stopping response from the first stop. This kit is a practical choice for brake repair on a 2008-2016 Mitsubishi Lancer, 2013-2014 Chrysler 200, or 2009-2011 Jeep Patriot when servicing both axles.
Common Brake Issues This Kit Can Address
- Brake pulsation caused by worn or uneven rotors
- Rust buildup on exposed rotor surfaces
- Noise from aged pads or degraded shims
- Reduced braking consistency from heat-worn friction material
- Extended service time from rotors that require cleaning before installation
Installation Notes and Fitment
- Fits 2008-2016 Mitsubishi Lancer, front and rear
- Fits 2013-2014 Chrysler 200, front and rear; 295mm front and 302mm rear rotors
- Fits 2012-2013 Mitsubishi Outlander, front and rear
- Fits 2011-2012 Chrysler 200, front and rear; 302mm rear rotors
- Fits 2011-2012 Mitsubishi Outlander Sport, front and rear
- Fits 2011-2012 Mitsubishi RVR, front and rear
- Fits 2009-2011 Jeep Compass, front and rear; 302mm rear rotors
- Fits 2009-2011 Jeep Patriot, front and rear; 302mm rear rotors
- Fits 2008-2011 Mitsubishi Outlander, front and rear; 5-passenger vehicle
- Fits 2008-2009 Dodge Avenger, front and rear
Verify rotor size and vehicle configuration before installation, especially on Chrysler 200, Jeep Compass, and Jeep Patriot applications with rear rotor size notes. This part number, 4504-39007, is intended for direct brake service on the listed vehicles and positions.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance where applicable. The rotors carry a 12-month warranty against defects in material and workmanship.











