Dynamite Friction 4504-31114 Disc Brake Kit - Front and Rear
Brake Kit for BMW 530e and 530i
DFC Friction part 4504-31114 is a complete disc brake kit with DFC GeoSpec coated rotors and 5000 Advanced brake pads. It is built for front and rear service on select BMW 530e, 530e xDrive, 530i, and 530i xDrive models, with fitment listed for 2018-2022 applications.
Key Features
- DFC GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry processed and ready to install without rotor cleaning or prep
- OE-style G3000/G11H18 cast iron rotor construction
- Non-directional rotor finish for even pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented designs
- DFC 5000 Advanced pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
Product Line Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads line combines coated replacement rotors with matched friction material for service jobs that need both corrosion protection and consistent pedal feel. For BMW 530e brake service and BMW 530i brake replacement, this kit brings together rotor and pad components in one package for front and rear maintenance.
Detailed Description
Part number 4504-31114 is engineered as a disc brake kit for select BMW 530e, BMW 530e xDrive, BMW 530i, and BMW 530i xDrive vehicles. The GeoSpec rotors use a protective coating that helps resist rust, while the machined surface and non-directional finish support quicker pad bedding and quieter stops. The 5000 Advanced pads are post-cured and scorched for stable friction performance from the first stop, with shims added to help reduce noise, vibration, and harshness.
This kit is a practical choice for drivers searching for a BMW 530e front and rear brake kit or a BMW 530i xDrive disc brake kit with coated rotors. Part number 4504-31114 is also a useful reference when ordering replacement brakes for 2018-2022 BMW 530e and 2021-2022 BMW 530i applications.
What This Brake Kit Helps Address
- Rotor rust and surface corrosion
- Brake noise during everyday driving
- Uneven pad bedding after brake service
- Reduced stopping consistency from worn rotors and pads
- Brake vibration caused by out-of-balance or worn components
Installation Notes
Compatible With front and rear brake service on the listed BMW applications. Each rotor is shipped dry and ready to install, which can reduce prep time during brake work. Verify rotor style and vehicle configuration against the notes for original design aluminum hat rotors before installation. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
DFC machines each rotor to tight tolerances, inspects critical dimensions, and checks vented rotors for balance. The rotors are covered by a 12-month warranty against defects in material and workmanship. Part number 4504-31114 is built to OE specifications for durability, reliability, and stable braking performance.
Brake Kit for BMW 530e and 530i
DFC Friction part 4504-31114 is a complete disc brake kit with DFC GeoSpec coated rotors and 5000 Advanced brake pads. It is built for front and rear service on select BMW 530e, 530e xDrive, 530i, and 530i xDrive models, with fitment listed for 2018-2022 applications.
Key Features
- DFC GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry processed and ready to install without rotor cleaning or prep
- OE-style G3000/G11H18 cast iron rotor construction
- Non-directional rotor finish for even pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented designs
- DFC 5000 Advanced pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
Product Line Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads line combines coated replacement rotors with matched friction material for service jobs that need both corrosion protection and consistent pedal feel. For BMW 530e brake service and BMW 530i brake replacement, this kit brings together rotor and pad components in one package for front and rear maintenance.
Detailed Description
Part number 4504-31114 is engineered as a disc brake kit for select BMW 530e, BMW 530e xDrive, BMW 530i, and BMW 530i xDrive vehicles. The GeoSpec rotors use a protective coating that helps resist rust, while the machined surface and non-directional finish support quicker pad bedding and quieter stops. The 5000 Advanced pads are post-cured and scorched for stable friction performance from the first stop, with shims added to help reduce noise, vibration, and harshness.
This kit is a practical choice for drivers searching for a BMW 530e front and rear brake kit or a BMW 530i xDrive disc brake kit with coated rotors. Part number 4504-31114 is also a useful reference when ordering replacement brakes for 2018-2022 BMW 530e and 2021-2022 BMW 530i applications.
What This Brake Kit Helps Address
- Rotor rust and surface corrosion
- Brake noise during everyday driving
- Uneven pad bedding after brake service
- Reduced stopping consistency from worn rotors and pads
- Brake vibration caused by out-of-balance or worn components
Installation Notes
Compatible With front and rear brake service on the listed BMW applications. Each rotor is shipped dry and ready to install, which can reduce prep time during brake work. Verify rotor style and vehicle configuration against the notes for original design aluminum hat rotors before installation. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
DFC machines each rotor to tight tolerances, inspects critical dimensions, and checks vented rotors for balance. The rotors are covered by a 12-month warranty against defects in material and workmanship. Part number 4504-31114 is built to OE specifications for durability, reliability, and stable braking performance.
Original: $512.55
-65%$512.55
$179.39Description
Brake Kit for BMW 530e and 530i
DFC Friction part 4504-31114 is a complete disc brake kit with DFC GeoSpec coated rotors and 5000 Advanced brake pads. It is built for front and rear service on select BMW 530e, 530e xDrive, 530i, and 530i xDrive models, with fitment listed for 2018-2022 applications.
Key Features
- DFC GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry processed and ready to install without rotor cleaning or prep
- OE-style G3000/G11H18 cast iron rotor construction
- Non-directional rotor finish for even pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented designs
- DFC 5000 Advanced pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
Product Line Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads line combines coated replacement rotors with matched friction material for service jobs that need both corrosion protection and consistent pedal feel. For BMW 530e brake service and BMW 530i brake replacement, this kit brings together rotor and pad components in one package for front and rear maintenance.
Detailed Description
Part number 4504-31114 is engineered as a disc brake kit for select BMW 530e, BMW 530e xDrive, BMW 530i, and BMW 530i xDrive vehicles. The GeoSpec rotors use a protective coating that helps resist rust, while the machined surface and non-directional finish support quicker pad bedding and quieter stops. The 5000 Advanced pads are post-cured and scorched for stable friction performance from the first stop, with shims added to help reduce noise, vibration, and harshness.
This kit is a practical choice for drivers searching for a BMW 530e front and rear brake kit or a BMW 530i xDrive disc brake kit with coated rotors. Part number 4504-31114 is also a useful reference when ordering replacement brakes for 2018-2022 BMW 530e and 2021-2022 BMW 530i applications.
What This Brake Kit Helps Address
- Rotor rust and surface corrosion
- Brake noise during everyday driving
- Uneven pad bedding after brake service
- Reduced stopping consistency from worn rotors and pads
- Brake vibration caused by out-of-balance or worn components
Installation Notes
Compatible With front and rear brake service on the listed BMW applications. Each rotor is shipped dry and ready to install, which can reduce prep time during brake work. Verify rotor style and vehicle configuration against the notes for original design aluminum hat rotors before installation. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
DFC machines each rotor to tight tolerances, inspects critical dimensions, and checks vented rotors for balance. The rotors are covered by a 12-month warranty against defects in material and workmanship. Part number 4504-31114 is built to OE specifications for durability, reliability, and stable braking performance.
